Search NASA⌕ Search

Engineering topics

Fu, Lin

Publications and source records attributed to Fu, Lin.

Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation

In this work, a near-wall model, which couples the inverse of a recently developed compressible velocity transformation (Griffin et al., Proc. Natl Acad. Sci., vol. 118, 2021, p. 34) and an algebraic temperature–velocity relation, is developed for high-speed turbulent boundary layers. As input, the model requires the mean flow state at one wall-normal height in the inner layer of the boundary layer and at the boundary-layer edge. As output, the model can predict mean temperature and velocity profiles across the entire inner layer, as well as the wall shear stress and heat flux. The model is tested in an a priori sense using a wide database of direct numerical simulation high-Mach-number turbulent channel flows, pipe flows and boundary layers (48 cases, with edge Mach numbers in the range 0.77–11, and semi-local friction Reynolds numbers in the range 170–5700). The present model is significantly more accurate than the classical ordinary differential equation (ODE) model for all cases tested. The model is deployed as a wall model for large-eddy simulations in channel flows with bulk Mach numbers in the range 0.7–4 and friction Reynolds numbers in the range 320–1800. When compared to the classical framework, in the a posteriori sense, the present method greatly improves the predicted heat flux, wall stress, and temperature and velocity profiles, especially in cases with strong heat transfer. In addition, the present model solves one ODE instead of two, and has a computational cost and implementation complexity similar to that of the commonly used ODE model.

42 ENGINEERING↗

Extracellular IL-37 promotes osteogenic and odontogenic differentiation of human dental pulp stem cells via autophagy

The osteogenic and odontogenic differentiation of dental pulp stem cells (DPSCs) contribute to restoration and regeneration of dental tissue. Previous study indicated that interleukin-37 (IL-37) was an anti-inflammatory factor that affected other pro-inflammatory signals. The aim of this study was to explore the effects of IL-37 on the differentiation of DPSCs. DPSCs were cultured in growth medium with different concentrations of IL-37. We selected the optimal concentration for the following experiments by alkaline phosphatase (ALP) activity analysis, quantitative reverse-transcription polymerase chain reaction (qRT-PCR) and Western blot. Cell counting kit assay (CCK-8) and 5-Ethynyl-2-Deoxyuridine (EdU) assay were conducted to assess the effects of IL-37 on the proliferation of DPSCs. ALP activity assay and staining, alizarin red S (ARS) staining, qRT‐PCR, Western blot as well as immunofluorescence staining were conducted to assess differentiation ability of DPSCs. Western blot, immunofluorescence staining and transmission electron microscopy (TEM) were utilized to examine cell autophagy. Results showed that IL-37 enhanced the osteogenic and odontogenic differentiation ability of DPSCs with no significant influence on the proliferation of DPSCs. Autophagy in DPSCs was activated by IL-37. Activation of autophagy enhanced osteogenesis and odontogenesis of DPSCs, whereas inhibition of autophagy suppressed DPSCs osteogenic and odontogenic differentiation. In conclusion, IL-37 increased osteogenic and odontogenic differentiation via autophagy.

60 APPLIED LIFE SCIENCES↗

A Lithium Metal Anode Surviving Battery Cycling Above 200 °C

Lithium (Li) metal electrode cannot endure elevated temperature (e.g., >200 °C) with the regular battery configuration due to its low melting point (180.5 °C) and high reactivity, which restricts its application in high-temperature Li metal batteries for energy storage and causes safety concerns for regular ambient-temperature Li metal batteries. Herein, this work reports a Li 5 B 4 /Li composite featuring a 3D Li 5 B 4 fibrillar framework filled with metallic Li, which maintains its initial structure at 325 °C in Ar atmosphere without leakage of the liquid Li. The capillary force caused by the porous structure of the Li 4 B 5 fibrillar framework, together with its lithiophilic surface, restricts the leakage of liquid metallic Li and enables good thermal tolerance of the Li 5 B 4 /Li composite. Thus, it can be facilely operated for rechargeable high-temperature Li metal batteries. Li 5 B 4 /Li electrodes are coupled with a garnet-type ceramic electrolyte (Li 6.5 La 3 Zr 0.5 Ta 1.5 O 12 ) to fabricate symmetric cells, which exhibit stable Li stripping/plating behaviors with low overpotential of approximate to 6 mV at 200 °C using a regular sandwich-type cell configuration. This study affords new insights into realizing a stable Li metal anode for high-temperature Li metal batteries with a simple battery configuration and high safety, which is different from traditional molten-salt Li metal batteries using a pristine metallic Li anode.

25 ENERGY STORAGE↗

HTR solver: An open-source exascale-oriented task-based multi-GPU high-order code for hypersonic aerothermodynamics

In this study, the open-source Hypersonics Task-based Research (HTR) solver for hypersonic aerothermodynamics is described. The physical formulation of the code includes thermochemical effects induced by high temperatures (vibrational excitation and chemical dissociation). The HTR solver uses high-order TENO-based spatial discretization on structured grids and efficient time integrators for stiff systems, is highly scalable in GPU-based supercomputers as a result of its implementation in the Regent/Legion stack, and is designed for direct numerical simulations of canonical hypersonic flows at high Reynolds numbers. Additionally, the performance of the HTR solver is tested with benchmark cases including inviscid vortex advection, low- and high-speed laminar boundary layers, inviscid one-dimensional compressible flows in shock tubes, supersonic turbulent channel flows, and hypersonic transitional boundary layers of both calorically perfect gases and dissociating air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynasore suppresses proliferation and induces apoptosis of the non-small-cell lung cancer cell line A549

Highlights: • Dynasore inhibits Drp1 and dynamin 2 expression in A549 cells. • Dynasore inhibits A549 cell proliferation in vitro. • Dynasore induces mitochondrial dysfunction in A549 cells. • Dynasore activates the mitochondrial apoptotic pathway in A549 cells. • Dynasore enhances the inhibitory effects of cisplatin on A549 cells. Lung cancer is the leading cause of cancer death worldwide, and most of all cases are non-small-cell lung cancer. Lung cancer is associated with dysregulation of mitochondrial fusion and fission, and inhibition of the fission regulator Dynamin-related protein 1 (Drp1) reduces proliferation and increases apoptosis of lung cancer cells. Dynasore is a small molecule non-selective inhibitor of the GTPase activity of dynamin 1, dynamin 2, and Drp1 in vivo and in vitro. Here, we investigated the effects of dynasore on the proliferation and apoptosis of A549 lung cancer cells, alone and in combination with the chemotherapeutic drug cisplatin. We found that cisplatin increased mitochondrial fission and dynamin 2 expression, whereas dynasore had the opposite effects. However, both cisplatin and dynasore independently induced mitochondrial oxidative stress, leading to mitochondrial dysfunction, reduced cell proliferation, and enhanced apoptosis. Importantly, dynasore significantly augmented the anti-cancer effects of cisplatin. To the best of our knowledge, this is the first report that dynasore inhibits proliferation and induces apoptosis of lung cancer cells, and enhances the inhibitory effects of cisplatin.

60 APPLIED LIFE SCIENCES↗

A novel partitioning method for block-structured adaptive meshes

We propose a novel partitioning method for block-structured adaptive meshes utilizing the meshless Lagrangian particle concept. With the observation that an optimum partitioning has high analogy to the relaxation of a multi-phase fluid to steady state, physically motivated model equations are developed to characterize the background mesh topology and are solved by multi-phase smoothed-particle hydrodynamics. In contrast to well established partitioning approaches, all optimization objectives are implicitly incorporated and achieved during the particle relaxation to stationary state. Distinct partitioning sub-domains are represented by colored particles and separated by a sharp interface with a surface tension model. In order to obtain the particle relaxation, special viscous and skin friction models, coupled with a tailored time integration algorithm are proposed. Numerical experiments show that the present method has several important properties: generation of approximately equal-sized partitions without dependence on the mesh-element type, optimized interface communication between distinct partitioning sub-domains, continuous domain decomposition which is physically localized and implicitly incremental. Therefore it is particularly suitable for load-balancing of high-performance CFD simulations.

97 MATHEMATICS AND COMPUTING↗

A physics-motivated Centroidal Voronoi Particle domain decomposition method

In this paper, we propose a novel domain decomposition method for large-scale simulations in continuum mechanics by merging the concepts of Centroidal Voronoi Tessellation (CVT) and Voronoi Particle dynamics (VP). The CVT is introduced to achieve a high-level compactness of the partitioning subdomains by the Lloyd algorithm which monotonically decreases the CVT energy. The number of computational elements between neighboring partitioning subdomains, which scales the communication effort for parallel simulations, is optimized implicitly as the generated partitioning subdomains are convex and simply connected with small aspect-ratios. Moreover, Voronoi Particle dynamics employing physical analogy with a tailored equation of state is developed, which relaxes the particle system towards the target partition with good load balance. Since the equilibrium is computed by an iterative approach, the partitioning subdomains exhibit locality and the incremental property. Numerical experiments reveal that the proposed Centroidal Voronoi Particle (CVP) based algorithm produces high-quality partitioning with high efficiency, independently of computational-element types. Thus it can be used for a wide range of applications in computational science and engineering.

97 MATHEMATICS AND COMPUTING↗

Cadmium-induced neural tube defects and fetal growth restriction: Association with disturbance of placental folate transport

Previous studies found that maternal Cd exposure on gestational day (GD)9 caused forelimb ectrodactyly and tail deformity, the characteristic malformations. The aim of the present study was to investigate whether maternal Cd exposure on GD8 induces fetal neural tube defects (NTDs). Pregnant mice were intraperitoneally injected with CdCl{sub 2} (2.5 or 5.0 mg/kg) on GD8. Neither forelimb ectrodactyly nor tail deformity was observed in mice injected with CdCl{sub 2} on GD8. Instead, maternal Cd exposure on GD8 resulted in the incidence of NTDs. Moreover, maternal Cd exposure on GD8 resulted in fetal growth restriction. In addition, maternal Cd exposure on GD8 reduced placental weight and diameter. The internal space of maternal and fetal blood vessels in the labyrinth layer was decreased in the placentas of mice treated with CdCl{sub 2}. Additional experiment showed that placental PCFT protein and mRNA, a critical folate transporter, was persistently decreased when dams were injected with CdCl{sub 2} on GD8. Correspondingly, embryonic folate content was markedly decreased in mice injected with CdCl{sub 2} on GD8, whereas Cd had little effect on folate content in maternal serum. Taken together, these results suggest that maternal Cd exposure during organogenesis disturbs transport of folate from maternal circulation to the fetuses through down-regulating placental folate transporters. - Highlights: • Maternal Cd exposure during organogenesis causes NTDs and FGR. • Maternal Cd exposure during organogenesis impairs placental development. • Cd disturbs transport of folate by down-regulating placental folate transporters.

60 APPLIED LIFE SCIENCES↗