Search NASA⌕ Search

Engineering topics

Fuhr, Addis S.

Publications and source records attributed to Fuhr, Addis S..

Digital twins and deep learning segmentation of defects in monolayer MX 2 phases

Developing methods to understand and control defect formation in nanomaterials offers a promising route for materials discovery. Monolayer MX 2 phases represent a particularly compelling case for defect engineering of nanomaterials due to the large variability in their physical properties as different defects are introduced into their structure. However, effective identification and quantification of defects remain a challenge even as high-throughput scanning transmission electron microscopy methods improve. This study highlights the benefits of employing first principles calculations to produce digital twins for training deep learning segmentation models for defect identification in monolayer MX 2 phases. Around 600 defect structures were obtained using density functional theory calculations, with each monolayer MX 2 structure being subjected to multislice simulations for the purpose of generating the digital twins. Several deep learning segmentation architectures were trained on this dataset, and their performances evaluated under a variety of conditions such as recognizing defects in the presence of unidentified impurities, beam damage, grain boundaries, and with reduced image quality from low electron doses. Further, this digital twin approach allows benchmarking different deep learning architectures on a theory dataset, which enables the study of defect classification under a broad array of finely controlled conditions. It thus opens the door to resolving the underpinning physical reasons for model shortcomings and potentially chart paths forward for automated discovery of materials defect phases in experiments.

36 MATERIALS SCIENCE↗

Defects go green: using defects in nanomaterials for renewable energy and environmental sustainability

Induction of point defects in nanomaterials can bestow upon them entirely new physics or augment their pre-existing physical properties, thereby expanding their potential use in green energy technology. Predicting structure-property relationships for defects a priori is challenging, and developing methods for precise control of defect type, density, or structural distribution during synthesis is an even more formidable task. Hence, tuning the defect structure to tailor nanomaterials for enhanced device performance remains an underutilized tool in materials design. We review here the state of nanomaterial design through the lens of computational prediction of defect properties for green energy technology, and synthesis methods to control defect formation for optimal performance. We illustrate the efficacy of defect-focused approaches for refining nanomaterial physics by describing several specific applications where these techniques hold potential. Most notably, we focus on quantum dots for reabsorption-free solar windows and net-zero emission buildings, oxide cathodes for high energy density lithium-ion batteries and electric vehicles, and transition metal dichalcogenides for electrocatalytic green hydrogen production and carbon-free fuels.

14 SOLAR ENERGY↗

High-speed mapping of surface charge dynamics using sparse scanning Kelvin probe force microscopy

Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO 3 /SrTiO 3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO 2 . Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.

25 ENERGY STORAGE↗

Pressure modulated charge transfer and phonon interactions drive phase transitions in uranium–aluminum laves phases

Lanthanide AB 2 intermetallic compounds known as Laves phases have itinerant 3d and localized 4f electrons, which lead to interesting physical properties such as magnetic anisotropy and high Curie temperatures. Actinide Laves phases can display physical properties that are similarly intriguing. However, at reduced A–A spacing the C14 and C15 polytypes may exhibit larger wavefunction overlap for their 5f electron states and distinct characteristics for phases with more delocalized chemical bonding. The C36 polytype, on the other hand, is extraordinarily rare (<5% of known Laves phases). UAl 2 is the only known actinide Laves phase to show a pressure-controllable C15 → C36 transition. Here, we apply first principles calculations to determine the origin of the C15 → C36 phase transition and reveal the differences between the corresponding properties of each phase. Pressure increases lead to bond compression–induced electron transfer from Al to U, which drives dynamic instability in the C15 phonon modes because of the uniform U–U bonding environment. Further, the opposite phenomena is observed in C36: varied U–U bonding environments are vibronically more stable after charge transfer. We find that the interplay between charge transfer, chemical bonding, and phononic stability are central to predicting phase transitions and corresponding changes in physical properties for both C15 and C36 UAl 2 .

36 MATERIALS SCIENCE↗

Deep Generative Models for Materials Discovery and Machine Learning-Accelerated Innovation

Machine learning and artificial intelligence (AI/ML) methods are beginning to have significant impact in chemistry and condensed matter physics. For example, deep learning methods have demonstrated new capabilities for high-throughput virtual screening, and global optimization approaches for inverse design of materials. Recently, a relatively new branch of AI/ML, deep generative models (GMs), provide additional promise as they encode material structure and/or properties into a latent space, and through exploration and manipulation of the latent space can generate new materials. These approaches learn representations of a material structure and its corresponding chemistry or physics to accelerate materials discovery, which differs from traditional AI/ML methods that use statistical and combinatorial screening of existing materials via distinct structure-property relationships. However, application of GMs to inorganic materials has been notably harder than organic molecules because inorganic structure is often more complex to encode. In this work we review recent innovations that have enabled GMs to accelerate inorganic materials discovery. We focus on different representations of material structure, their impact on inverse design strategies using variational autoencoders or generative adversarial networks, and highlight the potential of these approaches for discovering materials with targeted properties needed for technological innovation.

36 MATERIALS SCIENCE↗

Heterogeneity in Local Chemical Bonding Explains Spectral Broadening in Quantum Dots with Cu Impurities

Quantum dots (QDs) with optically active Cu impurities have been proposed as heavy-metal-free alternatives to Cd and Pb chalcogenides. However, the origin of their unusual optical properties is not well understood. In particular, spectral broadening is an issue for their use in high-color-purity light-emitting diodes and reabsorption-free solar windows. In this paper, we show with density functional theory calculations that chemical bonding variations have a major effect on the optical properties of Cu-doped ZnSe QDs. The Cu–Se coordination sphere is highly covalent and therefore sensitive to local variations in electrostatics and bond geometry. Correspondingly, changes in the Cu impurity environment lead to large shifts in their ground-state energy, which causes spectral broadening when multiple Cu impurity bonding environments coexist as subensembles with distinct absorption and emission energies. We conclude that while electron–phonon coupling is stronger for these systems than for typical II–VI QDs, spectral broadening predominantly occurs because of the inhomogeneous spatial distribution of Cu impurities. This is in agreement with a study that has shown narrow (~60 meV) single-particle emission linewidths for Cu x In 2–x Se y S 2–y or “CIS” QDs, which also emit through Cu impurities. Therefore, we predict that narrow ensemble emission in photonic devices can be achieved if heterogeneity is controlled.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge-Transport Mechanisms in CuInSe x S 2– x Quantum-Dot Films

Colloidal quantum dots (QDs) have attracted considerable attention as promising materials for solution-processable electronic and optoelectronic devices. Copper indium selenium sulfide (CuInSe x S 2–x or CISeS) QDs are particularly attractive as an environmentally benign alternative to the much more extensively studied QDs containing toxic metals such as Cd and Pb. Carrier transport properties of CISeS-QD films, however, are still poorly understood. Here, we aim to elucidate the factors that control charge conductance in CISeS QD solids and, based on this knowledge, develop practical approaches for controlling the polarity of charge transport and carrier mobilities. To this end, we incorporate CISeS QDs into field-effect transistors (FETs) and perform detailed characterization of these devices as a function of the Se/(Se+S) ratio, surface treatment, thermal annealing, and the identity of source and drain electrodes. We observe that as-synthesized CuInSe x S 2–x QDs exhibit degenerate p-type transport, likely due to metal vacancies and CuIn’’ anti-site defects (Cu 1+ on an In 3+ site) that act as acceptor states. Moderate-temperature annealing of the films in the presence of indium source and drain electrodes leads to switching of the transport polarity to nondegenerate n-type, which can be attributed to the formation of In-related defects such as In Cu •• (an In 3+ cation on a Cu 1+ site) or In i ••• (interstitial In3+) acting as donors. We observe that the carrier mobilities increase dramatically (by 3 orders of magnitude) with increasing Se/(Se+S) ratio in both n- and p-type devices. To explain this observation, we propose a two-state conductance model, which invokes a high-mobility intrinsic band-edge state and a low-mobility defect-related intragap state. These states are thermally coupled, and their relative occupancies depend on both QD composition and temperature. Here, our observations suggest that the increase in the relative fraction of Se moves conduction- and valence band edges closer to low-mobility intragap levels. This results in increased relative occupancy of the intrinsic band-edge states and a corresponding growth of the measured mobility. Further improvement in charge-transport characteristics of the CISeS QD samples as well as their stability is obtained by infilling the QD films with amorphous Al 2 O 3 using atomic layer deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗