G. J. Koch | Search NASA

NASA NTRSDate not supplied

TPSAS-NF1676L-12137-DND

Future robotic missions to Mars and, eventually, human missions to Mars will require landing massive spacecraft with ?pin point? accuracy, e.g., the planned Mars Sample Return (MSR) mission will require ?pin point? landing accuracy to rendezvous with the previously cached Mars samples to be re-turned to Earth and the first human mission to Mars, with payloads estimated to be in excess of 40 metric tons, must land very close to the cargo spacecraft that precede it on the journey to Mars. Hence, ?pin point? entry, descent and landing (EDL) has become a major technological driver in future massive robot-ic and human mission to Mars [1]. To achieve ?pin point? EDL on Mars, we must predict the atmospheric density, atmospheric winds and atmospheric dust level to an accuracy previously unobtainable. To develop an accurate and precise predictive model of the atmosphere of Mars, we propose a Mars-orbiting LIDAR system to measure/monitor the density, winds and dust in the atmosphere of Mars over two Mars years. The LIDAR measurements will be used to develop an accurate model of the atmosphere of Mars to be used for ?pin point? EDL for future Mars missions.

U. N. Singh↗

NASA NTRSDate not supplied

TPSAS-NF1676L-12987-DND

Preliminary results of the LaRC DAWN coherent wind lidar performance in NASA's GRIP airborne campaign of 2010.

M. J. Kavaya↗

NASA NTRSDate not supplied

Multi-Spectral Lidar Observations and Balloon Borne Validation of SO 2 -O 3 During the SOWLETS Campaign: An Examination of Local Incinerator Plume

The Langley Mobile O3 Lidar (LMOL) was stationed at NASA's Langley Research Center for the initiation of the SO 2 -O 3 Water Land Environment study (SOWLETS). The primary focus of the campaign was to examine the capabilities of a novel four-wavelength detection technique to measure the concentrations of sulfur dioxide (SO2) and ozone (O3). The exact location of the lidar, near the NASA/CAPABLE site, was optimized to intercept the plume emissions from a proximate incinerator facility using historical weather data for the month of the campaign. A novel four-wavelength lidar technique focused on the detection of sulfur dioxide (SO2) and ozone (O3) was employed, and its capabilities were thoroughly examined. The technique is built upon the standard DIAL. While 3 wavelengths would be enough to retrieve both SO2 and O3, the 4 wavelengths allow to provide data on aerosol backscattering. In parallel, SO 2 -O 3 sondes were launched and installed in the nearby NASA Landing and Impact research facility, providing validation for the lidar's atmospheric measurements. In conclusion, this campaign offers an improved understanding of SO2 emissions in the local environment and a validation of a novel technique to facilitate pollution observations. It shows the promise of this new kind of lidar to better understand and validate the observations by NASA/TEMPO ("Tropospheric Emissions: Monitoring of Pollution").

G. Gronoff↗