Search NASA⌕ Search

Engineering topics

Gagliardi, F J

Publications and source records attributed to Gagliardi, F J.

Dynamic Characterization of Mock Explosive Material Using Reverse Taylor Impact Experiments

The motivation for the current study is to evaluate the dynamic loading response of an inert mock explosive material used to replicate the physical and mechanical properties of LX-17-1 and PBX 9502 insensitive high explosives. The evaluation of dynamic material parameters is needed for predicting the deformation behavior including the onset of failure and intensity of fragmentation resulting from high velocity impact events. These parameters are necessary for developing and validating physically based material constitutive models that will characterize the safety and performance of energetic materials. The preliminary study uses a reverse Taylor impact configuration that was designed to measure the dynamic behavior of the explosive mock up to and including associated fragmentation. A stationary rod-shaped specimen was impacted using a compressed-gas gun by accelerating a rigid steel anvil attached to a sabot. The impact test employed high-speed imaging and velocity interferometry diagnostics for capturing the transient deformation of the sample at discrete times. Once established as a viable experimental technique with mock explosives, future studies will examine the dynamic response of insensitive high explosives and propellants.

36 MATERIALS SCIENCE↗

A Constitutive Model for Long Time Duration Mechanical Behavior in Insensitive High Explosives

An anisotropic constitutive model for the long term dimensional stability of insensitive high explosives is proposed. Elastic, creep, thermal, and ratchet growth strains are developed. Pressure and temperature effects are considered. The constitutive model is implemented in an implicit finite element code and compared to a variety of experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creep Testing Plastic-Bonded Explosives in Uni-axial Compression

High fidelity measurements of time-dependent strain in the plastic-bonded explosives LX-17-1 and PBX 9502 have been performed under constant, uni-axial, compressive load using a custom designed apparatus. The apparatus uses a combination of extensometers and linear variable differential transformers coupled with a data acquisition system, thermal controls, and gravitational loading. The materials being tested consist of a crystalline explosive material mixed with a polymeric binder. The behavior of each material is related to the type of explosive and to the percentage and type of binder. For any given plastic-bonded explosive, the creep behavior is also dependent on the stress level and test temperature. Experiments were conducted using a 3 x 3 stress-temperature matrix with a temperature range of 24 C to 70 C and with stresses ranging from 250-psi to 780-psi. Analysis of the data has shown that logarithmic curve fits provide an accurate means of quantification and facilitate a long-term predictive capability. This paper will discuss the design of the apparatus, experimental results, and analyses.

36 MATERIALS SCIENCE↗