Search NASA⌕ Search

Engineering topics

Gan, Lin

Publications and source records attributed to Gan, Lin.

Nanostructured silicon substrates of nanopore morphology for buffer-layer free nanoheteroepitaxial growth of InP films

To reduce the cost of III–V solar cells, a buffer-layer free method of depositing high-quality III–V thin films onto low-cost silicon nanostructured substrates is proposed that is enabled by stress relaxation due to the nanopore morphology of the silicon substrate. As a proof-of-concept test of the proposed method, the nanoheteroepitaxial deposition of high quality InP thin film is examined. By comparing the deposition of InP (under conditions optimized for InP deposition onto InP substrates) onto nanostructured Si(100) substrates with nanopore and nanopillar morphologies, the morphology of nanopores is found to be preferred for the nanoheteroepitaxial deposition of InP films.

36 MATERIALS SCIENCE↗

High-Quality Indium Phosphide Films and Nano-Network Grown Using Low-Cost Metal-Catalyzed Vapor-Liquid-Solid Method for Photovoltaic Applications

Growth of high-quality InP film is demonstrated by directly co-evaporating elemental In and P in a simple low-cost chemical vapor deposition (CVD) reactor. By exploring the interplay between the metal-assisted vapor–liquid–solid and vapor–solid mechanisms, the authors present the growth of highly stoichiometric InP thin films or nano-network in a wide range of growth temperature from 560 to 720 °C. Photoluminescence (PL) measurements reveal high optical quality of the as-grown InP film with PL bandwidth (≈49 meV) comparable to commercial InP wafer (≈41 meV). The versatility of this approach is demonstrated through successful growth of thin films on diverse substrates such as silicon, InP, and fused quartz. Additionally, the effects of catalysts are also studied by comparing growths based on Au-catalyst with In-self-catalyst (without Au). The temperature dependence study of Au-catalyzed growth shows that higher growth temperature results in formation of larger grain sizes and continuous void-free polycrystalline InP films. Preliminary solar cell devices are fabricated on a p-type silicon with an indium-tin-oxide contact layer. It is believed that the new growth strategy provides a simpler, lower cost (both precursors and substrates) approach for producing high-quality InP thin film for the fabrication of high efficiency, low-cost solar cells.

36 MATERIALS SCIENCE↗

Efficient C–C bond splitting on Pt monolayer and sub-monolayer catalysts during ethanol electro-oxidation: Pt layer strain and morphology effects

Efficient catalytic C–C bond splitting coupled with complete 12-electron oxidation of the ethanol molecule to CO 2 is reported on nanoscale electrocatalysts comprised of a Pt monolayer (ML) and sub-monolayer (sML) deposited on Au nanoparticles (Au@Pt ML/sML). The Au@Pt electrocatalysts were synthesized using surface limited redox replacement (SLRR) of an underpotentially deposited (UPD) Cu monolayer in an electrochemical cell reactor. Au@Pt ML showed improved catalytic activity for ethanol oxidation reaction (EOR) and, unlike their Pt bulk and Pt sML counterparts, was able to generate CO 2 at very low electrode potentials owing to efficient C–C bond splitting. To explain this, we explore the hypothesis that competing strain effects due to the Pt layer coverage/morphology (compressive) and the Pt–Au lattice mismatch (tensile) control surface chemisorption and overall activity. Control experiments on well-defined model Pt monolayer systems are carried out involving a wide array of methods such as high-energy X-ray diffraction, pair-distribution function (PDF) analysis, in situ electrochemical FTIR spectroscopy, and in situ scanning tunneling microscopy. The vibrational fingerprints of adsorbed CO provide compelling evidence on the relation between surface bond strength, layer strain and morphology, and catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating Multi-core Architectures through Accelerating the Three-Dimensional Lax–Wendroff Correction

Wave propagation forward modeling is a widely used computational method in oil and gas exploration. The iterative stencil loops in such problems have broad applications in scientific computing. However, executing such loops can be highly time time-consuming, which greatly limits application’s performance and power efficiency. In this paper, we accelerate the forward modeling technique on the latest multi-core and many-core architectures such as Intel Sandy Bridge CPUs, NVIDIA Fermi C2070 GPU, NVIDIA Kepler K20x GPU, and the Intel Xeon Phi Co-processor. For the GPU platforms, we propose two parallel strategies to explore the performance optimization opportunities for our stencil kernels. For Sandy Bridge CPUs and MIC, we also employ various optimization techniques in order to achieve the best.

3D Wave Forward Modeling↗

The origin of bimodal luminescence of β-SiAlON:Eu{sup 2+} phosphors as revealed by fluorescence microscopy and cathodoluminescence analysis

Graphical abstract: - Highlights: • Bimodal emission is originated from β-SiAlON grains with z ≥ 2. • Coexistence of two kinds of emission centers in the β-SiAlON phase is definite. • Fluorescence microscopy shows influence of the z value on emission of β-SiAlON. - Abstract: Eu{sup 2+}-doped SiAlON phosphors with the composition of Eu{sub x}Si{sub 6−z}Al{sub z}O{sub z}N{sub 8−z} (0.5 ≤ z ≤ 3) at a fixed x = 0.01 were synthesized by the gas pressure sintering method. Dependence of luminescence properties on the phase compositions in β-SiAlON:Eu{sup 2+} phosphors has been examined via fluorescence microscope and scanning electron microscope equipped with a cathodoluminescence spectrometer and an energy dispersive spectrometer. Bimodal emission (green and violet) from β-SiAlON phase is observed in the samples with z ≥ 2, indicating co-existence of two different kinds of coordination for Eu{sup 2+} ions in the host lattice.

36 MATERIALS SCIENCE↗