Engineering topics

Ganapol, Barry D.

Publications and source records attributed to Ganapol, Barry D..

8 records

DOE OSTI2022

Introduction of the Adding and Doubling Method for Solving Bateman Equations for Nuclear Fuel Depletion

This paper introduces and evaluates the Adding and Doubling Method (ADM) for solving the Bateman equations for depletion systems with varying numbers of nuclides and compares it to the Chebyshev Rational Approximation Method (CRAM), both implemented in the reactor physics analysis application Griffin. ADM, when applied to the Crank-Nicolson Finite Difference method, can produce results comparable in accuracy and precision to CRAM with comparable run times for systems with 35 or 297 nuclides. For systems with more than 300 nuclides, the matrix-matrix operations required by ADM are significantly more costly than the matrix-vector operations required by CRAM, making CRAM the more efficient method for systems with large numbers of nuclides. ADM is an accurate method that maintains other advantages over CRAM in that it does not depend on pre-generated coefficients or require complex number operations. ADM also manages to outperform CRAM by a factor of more than 250 in terms of run time for depletion systems that require multiple Bateman solves while the depletion matrix and time step size remain constant over all depletion intervals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2002

Sources of Uncertainty in the Prediction of LAI / fPAR from MODIS

To explicate the sources of uncertainty in the prediction of biophysical variables over space, consider the general equation: where z is a variable with values on some nominal, ordinal, interval or ratio scale; y is a vector of input variables; u is the spatial support of y and z ; x and u are the spatial locations of y and z , respectively; f is a model and B is the vector of the parameters of this model. Any y or z has a value and a spatial extent which is called its support. Viewed in this way, categories of uncertainty are from variable (e.g. measurement), parameter, positional. support and model (e.g. structural) sources. The prediction of Leaf Area Index (LAI) and the fraction of absorbed photosynthetically active radiation (fPAR) are examples of z variables predicted using model(s) as a function of y variables and spatially constant parameters. The MOD15 algorithm is an example of f, called f(sub 1), with parameters including those defined by one of six biome types and solar and view angles. The Leaf Canopy Model (LCM)2, a nested model that combines leaf radiative transfer with a full canopy reflectance model through the phase function, is a simpler though similar radiative transfer approach to f(sub 1). In a previous study, MOD15 and LCM2 gave similar results for the broadleaf forest biome. Differences between these two models can be used to consider the structural uncertainty in prediction results. In an effort to quantify each of the five sources of uncertainty and rank their relative importance for the LAI/fPAR prediction problem, we used recent data for an EOS Core Validation Site in the broadleaf biome with coincident surface reflectance, vegetation index, fPAR and LAI products from the Moderate Resolution Imaging Spectrometer (MODIS). Uncertainty due to support on the input reflectance variable was characterized using Landsat ETM+ data. Input uncertainties were propagated through the LCM2 model and compared with published uncertainties from the MOD15 algorithm.

Dungan, Jennifer L.↗

NASA NTRS1991

Benchmark solutions for the galactic heavy-ion transport equations with energy and spatial coupling

Nontrivial benchmark solutions are developed for the galactic heavy ion transport equations in the straightahead approximation with energy and spatial coupling. Analytical representations of the ion fluxes are obtained for a variety of sources with the assumption that the nuclear interaction parameters are energy independent. The method utilizes an analytical LaPlace transform inversion to yield a closed form representation that is computationally efficient. The flux profiles are then used to predict ion dose profiles, which are important for shield design studies.

Ganapol, Barry D.↗

NASA NTRS1991

A simplified formulation of photon transport in leaf canopies with scatterers of finite dimensions

A formalism for photon transport in leaf canopies with finite-dimensional scattering centers that mutually cross-shade was recently proposed resulting in an equation set which is rather complicated. In this paper, we propose a simplification of the correction factors that describe the correlation in photon fates. These simplified correction factors permit the derivation of a modified integro-differential transfer equation with two additional terms that arise from considerations of finite size scatterers. A numerical procedure for the solution of this transfer equation in the framework of a successive collisions approach is also presented.

Myneni, Ranga B.↗

NASA NTRS1989

A Hierarchy of Transport Approximations for High Energy Heavy (HZE) Ions

The transport of high energy heavy (HZE) ions through bulk materials is studied neglecting energy dependence of the nuclear cross sections. A three term perturbation expansion appears to be adequate for most practical applications for which penetration depths are less than 30 g per sq cm of material. The differential energy flux is found for monoenergetic beams and for realistic ion beam spectral distributions. An approximate formalism is given to estimate higher-order terms.

Wilson, John W.↗

NASA NTRS1989

Benchmark solutions for the galactic ion transport equations: Energy and spatially dependent problems

Nontrivial benchmark solutions are developed for the galactic ion transport (GIT) equations in the straight-ahead approximation. These equations are used to predict potential radiation hazards in the upper atmosphere and in space. Two levels of difficulty are considered: (1) energy independent, and (2) spatially independent. The analysis emphasizes analytical methods never before applied to the GIT equations. Most of the representations derived have been numerically implemented and compared to more approximate calculations. Accurate ion fluxes are obtained (3 to 5 digits) for nontrivial sources. For monoenergetic beams, both accurate doses and fluxes are found. The benchmarks presented are useful in assessing the accuracy of transport algorithms designed to accommodate more complex radiation protection problems. In addition, these solutions can provide fast and accurate assessments of relatively simple shield configurations.

Ganapol, Barry D.↗

NASA NTRS1989

BRYNTRN: A baryon transport model

The development of an interaction data base and a numerical solution to the transport of baryons through an arbitrary shield material based on a straight ahead approximation of the Boltzmann equation are described. The code is most accurate for continuous energy boundary values, but gives reasonable results for discrete spectra at the boundary using even a relatively coarse energy grid (30 points) and large spatial increments (1 cm in H2O). The resulting computer code is self-contained, efficient and ready to use. The code requires only a very small fraction of the computer resources required for Monte Carlo codes.

Wilson, John W.↗

NASA NTRS1988

Benchmark solutions for the galactic ion transport equations with spatial and energy coupling

In order to anticipate future space shielding requirements, NASA has initiated an effort to formulate computational methods to simulate radiation effects in space. As part of the program, numerical transport algorithms have been developed for the deterministic Boltzman equation describing galactic cosmic ray (GCR) interactions with matter. It thus becomes necessary to assess the accuracy of proposed deterministic algorithms. For this reason, analytical benchmark solutions to mathematically tractable galactic cosmic ray equations have recently been obtained. Even though these problems involve simplifying assumptions of the associated physics, they still contain the essential features of the basic transport processes. The solutions obtained are features of the basic transport processes. The solutions obtained are compared to results from numerical algorithms in order to ensure proper coding and to provide a measure of the accuracy of the numerical methods used in the algorithm. For the first time, mathematical methods have been applied to the galactic ion transport (GIT) equations in the straight ahead approximation with constant nuclear properties. The approach utilizes a Laplace transforms inversion yielding a closed form benchmark solution which is also computationally efficient.

Ganapol, Barry D.↗