Surface Tagging of Al 6061-T6 using Photoluminescent Oxides
The goal of tagging nuclear fuels (or related materials, such as fuel cladding) is to provide a persistent marker, traceable to the fuel manufacturer, that can be detected after some length of time, likely after the fuel has been lost, rerouted, or partially destroyed. Ideally, the tag is complicated enough to encode data pertaining to the provenance (manufacturer, date or time, constituents, etc.) and robust enough to survive in-pile exposure and/or further destruction. The taggant should not change the behavior or performance of the fuel in any meaningful way. Photoluminescent tagging was an attractive solution to many of these challenges, as it is undetectable under normal lighting conditions, visible to the naked eye under specific lighting conditions, does not require a significant quantity of material to be photoluminescent, observable with simple commercial detection tools, and is versatile and robust in application. In FY23, the team focused on embedding photoluminescent taggants onto the replicate fuel cladding surface using welding. From a welding standpoint, photoluminescent taggants, in the form of oxides, are a viable option for tagging because the taggants have high melting points, and thus likely to survive welding temperatures (i.e., remain as a secondary phase particle and maintain luminescent properties). Additionally, these taggants have the potential to act as a metal matrix composite which may increase the strength-to-weight ratio, stiffness, and ductility of the base material, all beneficial to cladding and fuel performance.