Engineering topics

Ganji, A. R.

Publications and source records attributed to Ganji, A. R..

3 records

NASA NTRS1979

An experimental study of the flow field and pollutant formation in a two dimensional premixed, turbulent flame

Spark shadowgraphs, high-speed schlieren movies, and the tracing of individual eddies were used to study a turbulent reacting shear layer in a premixed propane/air flow. The flow took place in a two-dimensional combustor, and the flame was stabilized behind a rearward facing streamlined step. The data show that in the velocity range 7.5 to 22.5 m/sec the mixing layer is dominated by Brown-Roshko type large coherent structures in both reacting and nonreacting flows. Information on the eddies, the flame, and the distribution of gas concentrations is presented.

Ganji, A. R.↗

NASA NTRS1979

Measurement of vortex frequencies in a lean, premixed prevaporized combustor

A modified laser schlieren and fast Fourier transform analysis system has been developed and applied to the study of vortex frequencies in a lean, premixed prevaporized combustor. The system is sensitive to the passage of vortex structures which dominate the flow in the combustor studied. The frequency spectra of the passage of vortices show distinct frequency peaks which are postulated to be characteristic of the processes triggering the vortex shedding. The method provides additional information which should aid in the characterization and understanding of shear flows.

Parker, L. J.↗

NASA NTRS1977

Laboratory studies of lean combustion

The fundamental processes controlling lean combustion were observed for better understanding, with particular emphasis on the formation and measurement of gas-phase pollutants, the stability of the combustion process (blowout limits), methods of improving stability, and the application of probe and optical diagnostics for flow field characterization, temperature mapping, and composition measurements. The following areas of investigation are described in detail: (1) axisymmetric, opposed-reacting-jet-stabilized combustor studies; (2) stabilization through heat recirculation; (3) two dimensional combustor studies; and (4) spectroscopic methods. A departure from conventional combustor design to a premixed/prevaporized, lean combustion configuration is attractive for the control of oxides of nitrogen and smoke emissions, the promotion of uniform turbine inlet temperatures, and, possibly, the reduction of carbon monoxide and hydrocarbons at idle.

Sawyer, R. F.↗