Engineering topics
Publications and source records attributed to Gao, Peiyuan.
Challenges include: The multiscale interactions among water, microbial respiration, and sediment under realistic riverbed conditions; The transferability of the scientific understanding of interactions at multiple sites; and the upscaling of these interactions from pore to reach scales.
Not Available
Deeper market penetration of redox flow batteries requires optimization of the cell performance. Though important for optimization, detailed analytical solutions have not been developed for electrolyte flow, mass and charge transport, and reaction kinetics within redox flow batteries. To this end, here we present analytical solutions to active species concentration and over-potential based on advection-diffusion transport for ions and Bulter-Volmer model for interface reaction kinetics. The solutions were validated with results from a finite element model. These solutions were then applied to investigate the relationship between over-potential and state of charge, current density, reaction rate constant, flow velocity, diffusivity, total active species concentration, and electrode structure. Explicit formulas were identified for minimum activation over-potential and limiting current density as well as their dependence on electrolyte properties, operation conditions, and electrode structure. With our new mathematical formulas, this work provides a theoretical framework for flow battery design.
The continual growth in energy demand has resulted in the deployment of renewable energy generators to reduce the impact of fossil fuel dependence. However, these generators often suffer from intermittency and require energy storage when there is over-generation and the subsequent release of this stored energy at high demand. One promising energy storage technology which can provide a solution to improve energy management and grid stability, is the redox flow battery. Among the numerous flow battery systems, vanadium redox flow battery is the most iconic solution to large scale energy storage, giving a more efficient link between energy production, especially from renewables, and energy demand. The aim of the current database is to characterize the performance of the cell design and to provide training/validation data for physical model or data-driven model. The database includes hundreds of experimental cell performance data of vanadium redox flow battery with various current densities for multiple charge-discharge cycles. All the cell parameters, chemical parameters, material parameters, operation parameters and thermodynamic parameters of the cell system are listed. Coulomb, voltaic and energy efficiencies are also provided. The database will be helpful for researchers in the field of redox flow batteries.
Lithium-ion batteries (LIBs) with high-nickel (Ni) content LiNi x Mn y Co z O 2 ( x + y + z = 1) (NMC with Ni ≥ 0.6) cathodes operated at high charge voltages have been considered as one of the most promising candidates for addressing the challenge of increasing energy density demand. Conventional LiPF 6 –organocarbonate electrolytes exhibit incompatibility with such cell chemistries under certain testing conditions because of the instability of electrode/electrolyte interphases. In response to this challenge, ether-based electrolytes with finely tuned structure and composition of solvation sheaths were developed and evaluated in graphite (Gr)∥NMC811 cell chemistry in 2.5–4.4 V, despite ethers being conventionally considered to be unfavorable electrolyte solvents for LIBs because of their anodic instability above 4.0 V and cointercalation into Gr electrodes. Furthermore, the functional ether-based electrolytes in this work enable both excellent cycle life and high rate capability of Gr∥NMC811 cells. Mechanistic studies reveal that the unique structure and composition of the solvation sheath of the functional ether electrolytes are the main reasons behind their excellent anodic stability and effective protection of the Gr electrode and, consequently, the extraordinary cell performances when operated at high charge cutoff voltages. This work also provides a feasible approach in developing highly stable functional electrolytes for high-energy density LIBs.
Functional electrolyte is the key to stabilizing the highly reductive lithium (Li) metal anode (LMA) and high voltage cathode for long life, high energy-density rechargeable Li metal batteries (LMBs). However, fundamental knowledge of the interaction principles between reactive electrodes and electrolytes is still limited. Recently localized high-concentration electrolytes (LHCEs) are emerging as promising electrolyte design strategies for LMBs. They can also serve as an ideal platform for understanding the reactivity characteristics of the inner solvation sheath on electrode surfaces due to their unique solvation structures. Here, we study the effects of a series of LHCEs with model electrolyte solvents (carbonate, sulfone, phosphate and ether) in high voltage LMBs. Varied electrode stabilities exhibited in different LHCEs indicate the intricate synergies between the salt and the solvent on electrode surfaces. Experimental and theoretical analyses reveal an intriguing general rule that the strong interactions between the salt and the solvent in the inner solvation sheath promote their intermolecular proton/charge transfer reactions, which dictates the properties of the electrode/electrolyte interphases and thus the battery performances.
The cycling performance of batteries is largely determined by electrode-electrolyte interphase associated with the chemical and electrochemical properties of electrolyte salts and solvents. In this work, we used a localized high concentration electrolyte (LHCE) that enables high performance of Si anodes as a model system and investigated the scientific mechanism behind the optimization of electrolyte. The correlation between electrode (cathode/anode)-electrolyte interphase and ion coordination structure and diffusion kinetics were elucidated systematically. Among all the LHCEs tested, the one with 1.8M LiFSI concentration and 1:2 molar ratio of carbonate solvents and fluorinated diluents has the highest proportion of solvent-separated ion pairs and contact ion pairs and fastest ion diffusion. It enables the most stable electrode-electrolyte interphase and hence the best Si anode performance. These results reveal the fundamental mechanism behind the stability of LHCEs and provide guidance on the new electrolyte design for Si anodes and other battery systems.
Even though atomistic and CG models have been used to simulate liquid nanodroplets in vapor, very few rigorous studies of the liquid-liquid interface structure are available, and most of them are limited to planar interfaces. In this work, we evaluate several existing force fields (FF)s, including two atomistic and three CG FFs, with respect to modeling the interface structure and thermodynamic properties of the water-hexane interface. Both atomistic FFs are able to quantitatively reproduce the interfacial tension and the coexisting densities of the experimentally-observed planar interface. We use the atomistic FFs to model water droplets in hexane and use these simulations to test the CG FFs. We found that the tested CG FFs cannot reproduce the interfacial tensions of planar and/or curved interfaces. Finally, we propose a new approach for learning coarse-grained (CG) potentials within the CG SDK (Shinoda-DeVane- Klein) FF framework from atomistic simulation data. We demonstrate that the new potential significantly improves the prediction of both the interfacial tension and structure of water-hexane planar and curved interfaces.
Lithium-oxygen (Li-O2) batteries with high reversibility require a stable electrolyte against the side reactions with Li metal anode and reactive oxygen species. Moreover, an electrolyte which can effectively utilize the low partial pressure of oxygen in atmosphere has significance effect on the practical application lithium-air batteries. In this study, we developed a localized high concentration electrolyte (LHCE) using 1H,1H,5H-Octafluoropentyl 1,1,2,2-tetrafluoroethyl ether (OTE) as a diluent, which satisfies all these conditions at the same time. The OTE-based LHCE exhibits much improved electrochemical performances in Li-O2 batteries and Li-air batteries compared to the conventional electrolyte and high concentration electrolyte. The design principle of this novel electrolyte also provides an important guideline and reference for future researches of electrolytes in Li-O2 and Li-air batteries.
Abstract A stable electrolyte is critical for practical application of lithium–oxygen batteries (LOBs). Although the ionic conductivity and electrochemical stability of the electrolytes have been extensively investigated before, their oxygen solubility, viscosity, volatility, and the stability against singlet oxygen ( 1 O 2 ) still need to be comprehensively investigated to provide a full picture of the electrolytes, especially for an open system such as LOBs. Herein, a systematic investigation is reported on the localized high‐concentration electrolytes (LHCEs) using different fluorinated diluents in comparison with those of conventional electrolytes. The physical properties and activation energies for reactions with singlet oxygen ( 1 O 2 ) of these electrolytes are calculated by density functional theory. The electrochemical performances of LOBs using these electrolytes are compared. This study reveals that the correlation between the stability of the electrolytes and their physical and electrochemical properties depends strongly on the diluents in LHCEs. Therefore, it shines light on the rational design of new electrolytes for LOBs.
To enable next-generation high power, high-energy-density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at high-rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well-known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anode even at high salt concentration conditions. Here, we developed a highly concentrated AN-based electrolyte with vinylene carbonate (VC) additive to suppress Li+ depletion at high current densities. Addition of VC in the AN-based electrolyte leads to the formation of a polycarbonate-based solid electrolyte interphase which minimizes Li corrosion and leads to very high Li CE of up to 99.1% at a current density of 0.2 mA cm-2. Using such an electrolyte, fast charging of Li||NMC333 cells has been realized at a high current density of 3.6 mA cm-2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm-2 has also been demonstrated.
LiNixMnyCo1-x-yO2 (NMC) cathode materials with Ni=0.8 have attracted great interest for application in high energy-density lithium (Li)-ion batteries (LIBs) because of their high specific capacities at high voltages. However, the practical application of Ni-rich NMC in LIBs under high charge voltages (e.g. 4.4 V and above) still faces big challenges due to the severe capacity fading, which is directly related to the instability of the cathode/electrolyte interface. In this work, we develop new localized high-concentration electrolytes (LHCEs) based on carbonate solvents, which are compatible with graphite (Gr) anode and have a high oxidation potential over 4.9 V vs. Li/Li+. The optimal LHCE enables the Gr||NMC811 cells with 2.8 mAh cm-2 cathode areal capacity loading to achieve an excellent cycling stability over 600 cycles with a capacity retention of 94.2 % under a charge cut-off voltage of 4.4 V at 25 ?C, good rate capabilities under fast charging or discharging up to 3C rate, and superior low-temperature discharge performance down to -30 ?C with a capacity retention of 85.6% at C/5 rate. The findings in this work shed light a very promising strategy to develop new electrolytes for practical high-energy LIBs with Ni-rich NMC cathodes.