Search NASA⌕ Search

Engineering topics

Gao, Xu

Publications and source records attributed to Gao, Xu.

At least 19 records

Structure/Interface Coupling Effect for High-Voltage LiCoO 2 Cathodes

LiCoO 2 (LCO) is widely applied in today's rechargeable battery markets for consumer electronic devices. However, LCO operations at high voltage are hindered by accelerated structure degradation and electrode/electrolyte interface decomposition. To overcome these challenges, co-modified LCO (defined as CB-Mg-LCO) that couples pillar structures with interface shielding are successfully synthesized for achieving high-energy-density and structurally stable cathode material. Benefitting from the "Mg-pillar" effect, irreversible phase transitions are significantly suppressed and highly reversible Li + shuttling is enabled. Interestingly, bonding effects between the interfacial lattice oxygen of CB-Mg-LCO and amorphous Co x B y coating layer are found to elevate the formation energy of oxygen vacancies, thereby considerably mitigating lattice oxygen loss and inhibiting irreversible phase transformation. Meanwhile, interface shielding effects are also beneficial for mitigating parasitic electrode/electrolyte reactions, subsequent Co dissolution, and ultimately enable a robust electrode/electrolyte interface. As a result, the as-designed CB-Mg-LCO cathode achieves a high capacity and excellent cycle stability with 94.6% capacity retention at an extremely high cut-off voltage of 4.6 V. We report these findings provide new insights for cathode material modification methods, which serves to guide future cathode material design.

25 ENERGY STORAGE↗

Accelerated epigenetic aging as a risk factor for chronic obstructive pulmonary disease and decreased lung function in two prospective cohort studies

Chronic obstructive pulmonary disease (COPD) is a frequent diagnosis in older individuals and contributor to global morbidity and mortality. Given the link between lung disease and aging, we need to understand how molecular indicators of aging relate to lung function and disease. Using data from the population-based KORA (Cooperative Health Research in the Region of Augsburg) surveys, we associated baseline epigenetic (DNA methylation) age acceleration with incident COPD and lung function. Models were adjusted for age, sex, smoking, height, weight, and baseline lung disease as appropriate. Associations were replicated in the Normative Aging Study. Of 770 KORA participants, 131 developed incident COPD over 7 years. Baseline accelerated epigenetic aging was significantly associated with incident COPD. The change in age acceleration (follow-up – baseline) was more strongly associated with COPD than baseline aging alone. The association between the change in age acceleration between baseline and follow-up and incident COPD replicated in the Normative Aging Study. Associations with spirometric lung function parameters were weaker than those with COPD, but a meta-analysis of both cohorts provide suggestive evidence of associations. Accelerated epigenetic aging, both baseline measures and changes over time, may be a risk factor for COPD and reduced lung function.

60 APPLIED LIFE SCIENCES↗

Separation of Phosphorus and Manganese from Steelmaking Slag by Selective Reduction

Steelmaking slag contains considerable amount of manganese (Mn) and phosphorus (P), and recycling them is an important issue. Since Mn is an alloy added to enhance the steel quality, while P is a harmful impurity in the steel product, they need to be separated for recycling. We have already found the possibility of separating Mn and P from steelmaking slag by selectively reducing P{sub 2}O{sub 5} and FeO while suppressing the reduction of MnO. As a fundamental study for the selective reduction of P from steelmaking slag, in this study, we vary the slag basicity, graphite mixing ratio, temperature, and crucible type to find the optimum condition. Artificial steelmaking slag with various compositions is synthesized and mixed with graphite powder in an Al{sub 2}O{sub 3} or a MgO crucible. The reduction is conducted at 1673 K, 1773 K, and 1873 K for 20 to 80 minutes. As a result, carbon saturated metal is formed from the slag, and the reduced metal and slag were separated easily. We find that a decrease in slag basicity suppressed the reduction rate of Mn while enhancing that of P. The activation energy for the reduction rate constant of P is found to be close to that of the diffusion of P in slag.

36 MATERIALS SCIENCE↗

Measurement of the Activity Coefficients of P and Mn in Carbon-Saturated Fe-P-Mn-C Alloy

The thermodynamic properties of the Fe-P-Mn-C(sat.) alloy, which is obtained following the reduction of steelmaking slag or manganese ore, are not adequately clarified. Thus, the current study involved measuring the activity coefficients of both Mn and P in the alloy system. The Fe-P-Mn-C (sat.) alloy (2.5 to 15.2 mass pct of P and 2.9 to 12.8 mass pct of Mn) was equilibrated with Ag in a graphite crucible at 1673 K, and thus several thermodynamic data were obtained as follows: Interaction parameters: ε{sub Mn (C sat.)}{sup P}=− 4.72±0.27,(X{sub Mn}<0.06, X{sub P}<0.25, 1673K), ε{sub C (C sat.)}{sup P}=6.09 ± 0.15, (X{sub Mn}<0.06, X{sub P}<0.25, 1673K). C solubility: X{sub C[in Fe-P-Mn-C(sat.)]}=0.19e{sup −(6.09X{sub P}− 0.47X{sub M}{sub n})}. Activity coefficient: lnγ{sub Mn [in Fe-P-Mn-C(sat.)]}=− 4.72X{sub P}−0.47X{sub C}−0.87, lnγ{sub P [in Fe-P-Mn-C(sat.)]}{sup H}−lnγ{sub P [in Fe-P-C]}{sup H}=ε{sub P}{sup Mn}X{sub Mn}=−4.72X{sub Mn}, and lnγ{sub P [in Fe-P-Mn-C (sat.)]}{sup H}=−4.72X{sub Mn}+4.26X{sub P}+6.09X{sub C}. In addition, a comparison with the results obtained by previous studies on the selective reduction of steelmaking slag indicated that the activity coefficients of P and Mn obtained in the study were applicable.

36 MATERIALS SCIENCE↗

Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel

Magnesia-chromite refractory materials are widely employed in steel production, and are considered a potential MgO source for the generation of MgO·Al{sub 2}O{sub 3} spinel inclusions in steel melts. In this study, a square magnesia-chromite refractory rod was immersed into molten steel of various compositions held in an Al{sub 2}O{sub 3} crucibles. As the immersion time was extended, Mg and Cr gradually dissolved from the magnesia-chromite refractory, and the Mg and Cr contents of the steel melts increased. However, it was found that the inclusions in the steel melts remained as almost pure Al{sub 2}O{sub 3} because the Mg content of the steel melts was low, approximately 1 ppm. On the surface of the magnesia-chromite refractory, an MgO·Al{sub 2}O{sub 3} spinel layer with a variable composition was formed, and the thickness of the MgO·Al{sub 2}O{sub 3} spinel layer increased with the immersion time and the Al content of the steel melts. At the rod interface, the formed layer consisted of MgO-saturated MgO·Al{sub 2}O{sub 3} spinel. The MgO content decreased along the thickness direction of the layer, and at the steel melts interface, the formed layer consisted of Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} spinel. Therefore, the low content of Mg in steel melts and the unchanged inclusions were because of the equilibrium between Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} layer and Al{sub 2}O{sub 3}. In addition, the effects of the Al and Cr contents of the steel melts on the dissolution of Mg from the magnesia-chromite refractory are insignificant.

36 MATERIALS SCIENCE↗

Kinetics of Transformation of Al{sub 2}O{sub 3} to MgO·Al{sub 2}O{sub 3} Spinel Inclusions in Mg-Containing Steel

During ladle furnace refining, initial Al{sub 2}O{sub 3} inclusions generally transform into MgO·Al{sub 2}O{sub 3} spinel inclusions; these generated spinel inclusions consequently deteriorate the product quality. In this study, the transformation from Al{sub 2}O{sub 3} to MgO·Al{sub 2}O{sub 3} was investigated by immersing an Al{sub 2}O{sub 3} rod into molten steel, which was in equilibrium with both MgO and MgO·Al{sub 2}O{sub 3} spinel-saturated slag. A spinel layer, with a thickness of 4 μm, was generated on the Al{sub 2}O{sub 3} rod surface just 10 s after its immersion at 1873 K (1600 °C). The thickness of the formed spinel layer increased with the immersion period and temperature. Moreover, the MgO content of the generated spinel layer also increased with the immersion period. In this study, the chemical reaction rate at 1873 K (1600 °C) was assumed to be sufficiently high, and only diffusion was considered as a rate-controlling step for this transformation. By evaluating the activation energy, MgO diffusion in the generated spinel layer was found to be the rate-controlling step. In addition, this estimation was confirmed by observing the Mg and Al concentration gradients in the generated spinel layer. The results of this study suggest that the MgO diffusion in the spinel inclusions plays a substantial role with regard to their formation kinetics.

36 MATERIALS SCIENCE↗

Effect of Si Content on Oxide Formation on Surface of Molten Fe-Cr-C Alloy Bath During Oxygen Top Blowing

Using a direct observation experimental method, the oxide formation behavior on the surface of Fe-Cr-5 mass pct C-Si alloy baths during decarburization by a top-blown Ar-O 2 mixture was studied. The effects of the initial Si and Cr content of the alloy, temperature, and oxygen feed ratio on oxide formation were investigated. The results showed that, for alloys without Si, oxide particles, unstable oxide films, and stable oxide films formed sequentially. The presence of Si in the alloy changed the formation behavior of stable oxide film, and increased the crucial C content when stable oxide film started to form. Increasing the temperature, decreasing the initial Cr content, and increasing the ratio of the diluting gas decreased the critical C content at which a stable oxide film started to form. In addition, the P CO and a Cr 2O 3 values at which oxides started to form were estimated using Hilty’s equation and the equilibrium relation to understand the formation conditions and the role of each parameter in oxide formation.

36 MATERIALS SCIENCE↗

Distribution of P{sub 2}O{sub 5} and Na{sub 2}O Between Solid Solution and Liquid Phase in the CaO-SiO{sub 2}-Fe{sub 2}O{sub 3}-P{sub 2}O{sub 5}-Na{sub 2}O Slag System with High P{sub 2}O{sub 5} Content

The phosphorus content in hot metal will increase in future, because iron ores are steadily deteriorating in quality. Na{sub 2}O addition to slag is considered an effective method for increasing the efficiency of dephosphorization. In addition, Na{sub 2}O modification also facilitates phosphorus recovery from dephosphorization slag with high P{sub 2}O{sub 5} content by selective leaching. Therefore, it is necessary to investigate the distribution ratios of P{sub 2}O{sub 5} and Na{sub 2}O between solid solution and liquid phase in the CaO-SiO{sub 2}-Fe{sub 2}O{sub 3}-P{sub 2}O{sub 5}-Na{sub 2}O slag system. A linear relationship was found between the distribution ratio of P{sub 2}O{sub 5} and the Na{sub 2}O content in slag, and was independent of P{sub 2}O{sub 5} content. When the Na{sub 2}O content was high, the Na{sub 2}O content in the solid solution approached saturation and a new 2CaO·SiO{sub 2}-2CaO·Na{sub 2}O·P{sub 2}O{sub 5} solid solution formed. The addition of Na{sub 2}O decreased the P{sub 2}O{sub 5} content in solid solution, while it increased the mass fraction of solid solution in slag. The distribution ratio of P{sub 2}O{sub 5} increased with increase in the Fe{sub 2}O{sub 3} content and basicity of slag. An increase in P{sub 2}O{sub 5} content in slag results in an increase in the activity coefficient of P{sub 2}O{sub 5} both in the liquid phase and in the solid solution.

36 MATERIALS SCIENCE↗

Influence of the Physical Properties of Liquids and Diameter of Bubble on the Formation of Liquid Column at the Interface of Two Liquid Phases by the Rising Bubble

The formation of metal emulsion in a steel-making process enhances the reaction between metal and slag. A part of the metal emulsion is formed by a bubble passing through the interface between the metal and slag phases. In a previous study, it was determined that the formation of metal column by the bubble is related to the formation of metal droplets. In this research, the effects of bubble particle size, interfacial tension, viscosity of upper layer, and lower layer density on the formation of lower liquid column were investigated. In order to conduct an in situ observation of gas and liquid behaviors, aqueous solution and silicon oil systems were employed. It was determined that a narrow and elongated column forms liquid droplets in the upper liquid layer and contributes to the formation of droplets. The height of the column and the volume of droplets increase with the increase in bubble size. The influence of interfacial tension of the two liquid phases on the column height and the formation of droplet is slight. The height of the formed column decreases with the increase in the density of lower liquid.

36 MATERIALS SCIENCE↗

Enhancement of DEN-induced liver tumorigenesis in heme oxygenase-1 G143H mutant transgenic mice

Heme oxygenase (HO) is the rate-limiting enzyme in heme metabolism. HO-1 exhibits anti-oxidative and anti-inflammatory function via the actions of its metabolite, respectively. A growing body of evidence demonstrates that HO-1 is implicated in the pathogenesis and progression of several types of cancer. However, whether HO-1 takes part in healthy-premalignant-malignant transformation is still undefined. In this study, we took advantage of transgenic mice which over-expressed HO-1 dominant negative mutant (HO-1 G143H) and observed its susceptibility to DEN-induced hepatocarcinogenesis. Our results indicate that HO-1 G143H mutant accelerates the progression of tumorigenesis and tumor growth. The mechanism is closely related to enhancement of ROS production which induce more hepatocytes death and secretion of inflammatory cytokines, proliferation of surviving hepatocytes. Our result provides the direct evidence that HO-1 plays an important protective role in liver carcinogenesis. Alternatively, we suggest the possible explanation on effect of HO-1 promoter polymorphism which involved in tumorigenesis. - Highlights: • Enhancement of DEN-induced hepatocarcinogenesis in HO-1 G143H Tg mice. • HO-1G143H mutant enhanced DEN-induced ROS production and liver injury. • HO-1G143H mutant aggravated DEN-induced changes of inflammatory factors and cell proliferation.

60 APPLIED LIFE SCIENCES↗

Physical implication of transition voltage in organic nano-floating-gate nonvolatile memories

High-performance pentacene-based organic field-effect transistor nonvolatile memories, using polystyrene as a tunneling dielectric and Au nanoparticles as a nano-floating-gate, show parallelogram-like transfer characteristics with a featured transition point. The transition voltage at the transition point corresponds to a threshold electric field in the tunneling dielectric, over which stored electrons in the nano-floating-gate will start to leak out. The transition voltage can be modulated depending on the bias configuration and device structure. For p-type active layers, optimized transition voltage should be on the negative side of but close to the reading voltage, which can simultaneously achieve a high ON/OFF ratio and good memory retention.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct probing of electron and hole trapping into nano-floating-gate in organic field-effect transistor nonvolatile memories

Electron and hole trapping into the nano-floating-gate of a pentacene-based organic field-effect transistor nonvolatile memory is directly probed by Kelvin probe force microscopy. The probing is straightforward and non-destructive. The measured surface potential change can quantitatively profile the charge trapping, and the surface characterization results are in good accord with the corresponding device behavior. Both electrons and holes can be trapped into the nano-floating-gate, with a preference of electron trapping than hole trapping. The trapped charge quantity has an approximately linear relation with the programming/erasing gate bias, indicating that the charge trapping in the device is a field-controlled process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dopant selection for control of charge carrier density and mobility in amorphous indium oxide thin-film transistors: Comparison between Si- and W-dopants

The dependence of oxygen vacancy suppression on dopant species in amorphous indium oxide (a-InO{sub x}) thin film transistors (TFTs) is reported. In a-InO{sub x} TFTs incorporating equivalent atom densities of Si- and W-dopants, absorption of oxygen in the host a-InO{sub x} matrix was found to depend on difference of Gibbs free energy of the dopants for oxidation. For fully oxidized films, the extracted channel conductivity was higher in the a-InO{sub x} TFTs containing dopants of small ionic radius. This can be explained by a reduction in the ionic scattering cross sectional area caused by charge screening effects.

36 MATERIALS SCIENCE↗

Reduction of the interfacial trap density of indium-oxide thin film transistors by incorporation of hafnium and annealing process

The stable operation of transistors under a positive bias stress (PBS) is achieved using Hf incorporated into InO{sub x}-based thin films processed at relatively low temperatures (150 to 250 °C). The mobilities of the Hf-InO{sub x} thin-film transistors (TFTs) are higher than 8 cm{sup 2}/Vs. The TFTs not only have negligible degradation in the mobility and a small shift in the threshold voltage under PBS for 60 h, but they are also thermally stable at 85 °C in air, without the need for a passivation layer. The Hf-InO{sub x} TFT can be stable even annealed at 150 °C for positive bias temperature stability (PBTS). A higher stability is achieved by annealing the TFTs at 250 °C, originating from a reduction in the trap density at the Hf-InO{sub x}/gate insulator interface. The knowledge obtained here will aid in the realization of stable TFTs processed at low temperatures.

36 MATERIALS SCIENCE↗

Organic field-effect transistor nonvolatile memories utilizing sputtered C nanoparticles as nano-floating-gate

High-performance organic field-effect transistor nonvolatile memories have been achieved using sputtered C nanoparticles as the nano-floating-gate. The sputtered C nano-floating-gate is prepared with low-cost material and simple process, forming uniform and discrete charge trapping sites covered by a smooth and complete polystyrene layer. The devices show large memory window, excellent retention capability, and programming/reading/erasing/reading endurance. The sputtered C nano-floating-gate can effectively trap both holes and electrons, and it is demonstrated to be suitable for not only p-type but also n-type organic field-effect transistor nonvolatile memories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗