Search NASA⌕ Search

Engineering topics

Garces, Milton

Publications and source records attributed to Garces, Milton.

At least 19 records

Laser-Induced Fluorescence for Monitoring Environmental Contamination and Stress in the Moss Thuidium plicatile

The ability to detect, measure, and locate the source of contaminants, especially heavy metals and radionuclides, is of ongoing interest. A common tool for contaminant identification and bioremediation is vegetation that can accumulate and indicate recent and historic pollution. However, large-scale sampling can be costly and labor-intensive. Hence, non-invasive in-situ techniques such as laser-induced fluorescence (LIF) are becoming useful and effective ways to observe the health of plants through the excitation of organic molecules, e.g., chlorophyll. The technique presented utilizes images collected of LIF in moss to identify different metals and environmental stressors. Analysis through image processing of LIF response was key to identifying Cu, Zn, Pb, and a mixture of the metals at nmol/cm 2 levels. Specifically, the RGB values from each image were used to create density histograms of each color channel’s relative pixel abundance at each decimal code value. These histograms were then used to compare color shifts linked to the successful identification of contaminated moss samples. Photoperiod and extraneous environmental stressors had minimal impact on the histogram color shift compared to metals and presented with a response that differentiated them from metal contamination.

59 BASIC BIOLOGICAL SCIENCES↗

Improved Smartphone Network Deployment Methods for Explosion Collection

Improved Smartphone Network Deployment Methods for Explosion Collection Samuel Kei Takazawa1, Sarah Popenhagen1, Milton A. Garcés1, Luis Ocampo Giraldo2, Jay Hix2 1University of Hawai?i, 2Idaho National Laboratory Milton A. Garcés, milton@isla.hawaii.edu ETI – Consortium for Enabling Technologies and Innovation: Director, Anna Erickson, Ph.D.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

Acoustic Signatures of Solvent Extraction Processes [Poster and Paper]

Data from four low-frequency acoustic sensors were used to investigate potential acoustic characteristics of centrifugal contactor, aqueous pump, and organic pump activity during the experiment. Three of the four sensors were Gem Infrasound Loggers (Anderson, et al. 2018) with serial numbers 190, 189, and 188. They will hereafter be referred to as GEM190, GEM189, and GEM188, respectively. The fourth acoustic sensor was a Raspberry Shake & Boom (Raspberry Shake 2017), which will hereafter be referred to as the RS&B. All four sensors record audio at a sampling rate of 100 Hz, allowing analysis of signals with characteristic frequencies up to 50 Hz.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Explosion Detection using Transfer Learning via YAMNet [Poster]

The acoustic data of explosions and noise collected on smartphones were fed to the YAMNet model to obtain the scores of each class. The data was split 60/20/20 for training, validation, and testing. A single-layered neural network was trained using the computed scores to predict if the data was an explosion or noise. The trained model was then combined with the YAMNet model. The combined model was tested with the ESC-50 dataset to investigate overall accuracy and class based false positive rates.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

Inferring UAV Position Relative to Smartphone Sensor Based on Acoustic Characteristics

As commercial and non-commercial unmanned aerial vehicles (UAVs) improve technologically and increase in accessibility, their potential for use in actions antithetical to nuclear non-proliferation efforts increases as well. The ability to identify and locate UAVs using ubiquitous, inexpensive hardware and software would be advantageous as both a deterrent and an initial warning system. Our team looks to utilize smartphones as acoustic sensors to record and characterize UAV movement based on the sound produced while in flight. Multi-rotor UAVs produce identifiable acoustic spectral characteristics with frequencies and harmonics corresponding to motor revolutions per minute and the propeller characteristics. As the source moves closer to the receiver these spectral patterns remain relatively stable (at slow speeds), while the energy observed from the waves increases. The goal of this work is to utilize a small network of smartphone sensors with known, fixed positions to infer the relative position of an in-flight UAV with respect to the position of the smartphones through the variation in acoustic energy.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

MINOS Infrasound Analysis Synopsis

This report was written as a guide to working with infrasound data collected as part of the Multi-Informatics for Nuclear Operations Scenarios (MINOS)project, an NA-22 funded venture. The main purpose of overall MINOS project is the combination of multiple, disparate data modalities to characterize the operations at a nuclear facility, specifically instrumenting and studying the High-Flux Isotope Reactor (HFIR) and Radiochemical Engineering Development Center (REDC) locate at Oak Ridge National Laboratory in Oak Ridge, TN. HFIR is an 85 MW research reactor and is used primarily for production of medical radioisotopes, material irradiation experiments, neutron activation, and neutron scattering. Targets for the reactor are constructed, processed, and dissolved at REDC. REDC also hosts other glove-box and hot-cell type activities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗