Search NASASearch

Engineering topics

Gardner, L. D.

Publications and source records attributed to Gardner, L. D..

Property Measurements of LiF-NaF-KF Molten Salts Doped with Surrogate Fission Products

Measurements of molten salt properties including transition temperatures, phase behavior, heat capacity, density, volumetric thermal expansion, surface tension, viscosity thermal diffusivity, thermal conductivity, and vapor pressure are performed at Argonne. The properties of several fuel and coolant salts including eutectic LiF-NaF-KF (FLiNaK) have been measured. These properties are suitable for use in evaluating reactor performance during startup and early operating conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS

Measurements of Electron Impact Excitation Cross Sections at the Harvard-Smithsonian Center for Astrophysics

The analysis of absolute spectral line intensities and intensity ratios with spectroscopic diagnostic techniques provides empirical determinations of chemical abundances, electron densities and temperatures in astrophysical objects. Since spectral line intensities and their ratios are controlled by the excitation rate coefficients for the electron temperature of the observed astrophysical structure, it is imperative that one have accurate values for the relevant rate coefficients. Here at the Harvard-Smithsonian Center for Astrophysics, we have been carrying out measurements of electron impact excitation (EIE) for more than 25 years.

Gardner, L. D.

Determination of 3D coronal structures from UVCS/SOHO synoptic observations

Daily coronal synoptic observations with the ultraviolet coronagraph spectrometer (UVCS) on SOHO are used to create Carrington maps of line of sight intensities and spectral line widths for H I Lyman alpha and the O 6 1032/1037 doublet. These 2D maps can then be used as inputs to a tomographic inversion routine to produce 3D models of the corona out to the 2.5 solar radius in the polar regions (3.0 solar radius in equatorial regions). The initial results for the determination of O(5+) outflow velocities as a function of heliographic latitude is presented.

Strachan, L.

The quiescent corona and slow solar wind

The observations of the ultraviolet coronagraph spectrometer (UVCS), operating onboard the Solar and Heliospheric Observatory (SOHO) spacecraft, are discussed. The purpose of the UVCS is the study of the quiescent coronal streamer and the slow solar wind. The observations started in January 1996. Polarized radiance data in the visible continuum were obtained. Some characteristics of the coronal streamer from the UVCS recorded data are discussed. A model for the source of the slow solar wind in the inner corona is proposed.

Noci, G.

Spectroscopic observations of the extended corona during the SOHO whole sun month

The spatial distribution of plasma parameters in the extended corona, derived from the ultraviolet coronagraph spectrometer (UVCS) onboard the Solar and Heliospheric Observatory (SOHO), was investigated. The observations were carried out during the SOHO whole month campaign. Daily coronal scans in the H I Lyman alpha and O VI lambda-lambda 1032 A and 1037 A were used. Maps of outflow velocities of O(5+), based on Doppler dimming of the O VI lines, are discussed. The velocity distribution widths of O(5+) are shown to be a clear signature of coronal holes while the velocity distributions for H(0) show a much smaller effect. The possible physical explanations for some of the observed features are discussed.

Strachan, L.

Spectroscopic diagnostics of extended corona and solar wind with UVCS/Spartan

The primary goal of the Ultraviolet Coronal Spectrometer on Spartan 201 (UVCS/Spartan) is to make spectroscopic diagnostic measurements that can be used to derive plasma parameters in the extended solar corona where it is believed that significant heating of the corona and acceleration of the solar wind take place. Direct and indirect measurements of particle velocity distribution, thermal and non-thermal temperatures, and bulk outflow velocities are crucial to aid in the identification of physical processes that may be responsible for coronal heating and solar wind acceleration. UVCS/Spartan has made two flights in April 1993 and September 1994, the latter coinciding with the South Polar Passage of the Ulysses spacecraft. Observations were made of the large-scale structures and sub-structures of coronal holes and streamers at heliocentric heights between 1.5 solar radii and 3.5 solar radii. Measurements were made of H I Lyman-alpha intensities and profiles, and line intensities of minor ions like O(5+) and Fe(11+). We will present results from the flights and discuss how these measurements are used to constrain values for the proton thermal and non-thermal kinetic temperatures, proton bulk outflow velocities, and minor ion temperatures and bulk outflow velocities. Plans for the upcoming flight in July 1995 will also be discussed.

Strachan, L.

Ly-alpha and white light observations of a CME during the Spartan 201-1 mission

A coronal mass ejection (CME) near a large active region on the west limb was observed with the white light coronograph (WLC) and ultraviolet coronal spectrometer (UVCS) on the Spartan 201 satellite at 9:42 UT on 12 Apr. 1993. Soft X-ray images of the region below the CME were obtained out to 1.7 solar radii with the soft X-ray telescope (SXT) on Yohkoh. After the event, the formation of a new helmet streamer could be seen in the polarized brightness (pB) images from the Mk III coronograph at Mauna Loa. The CME was observed from Spartan 201 in two different pB images obtained 14 min apart using the WLC, and was observed moving through the field-of-view of the UVCS integrated intensity slit. Ly-alpha intensities in the same region of the corona were obtained one orbit earlier (prior to the CME) using the Ly-alpha profile slit of the UVCS. These are the first Ly-alpha observations of a CME and may help constrain models of the electron temperature on CME's.

Hassler, Don M.

UVCS/SOHO capability for determining coronal conditions before, during, and after CME's

The ultraviolet coronal spectrometer (UVCS)/SOHO instrument will provide spectroscopic determinations of plasma parameters describing the evolution of coronal conditions at the site of coronal mass ejections (CME's). Prior to a CME event, UVCS can provide an empirical model of the coronal region where the event originates. The model would include values for the proton density, temperature, and outflow velocity; the electron density and temperature; and minor ion densities, temperatures, and outflow velocities. This information would be determined for heliocentric heights from about 1.5 to 3.5 of the solar radius with a subset of the parameters determined up to heights of 12 of the solar radius. During the event, UVCS would repeatedly sample one or more heights between 1.5 and 3.5 of the solar radius with a time resolution of about 1 min. The goal would be to determine the mass and energy content of the CME as it moves outward. After the event, the conditions in the region would be determined as before. Information about the instrument optical specifications and sensitivity is provided.

Strachan, Leonard

Simulated O VI Doppler dimming measurements of coronal outflow velocities

The possibility of determining O(5+) outflow velocities by using a Doppler dimming analysis of the resonantly scattered intensities of O VI lambda 1031.9 and lambda 1037.6 is addressed. The technique is sensitive to outflow velocities, W, in the range W greater than 30 and less than 250 km/s and can be used for probing regions of the inner solar corona, where significant coronal heating and solar wind acceleration may be occurring. These velocity measurements, when combined with measurements of other plasma parameters (temperatures and densities of ions and electrons) can be used to estimate the energy and mass flux of O(5+). In particular, it may be possible to locate where the flow changes from subsonic to supersonic and to identify source regions for the high and low speed solar wind. The velocity diagnostic technique is discussed with emphasis placed on the requirements needed for accurate outflow velocity determinations. Model determinations of outflow velocities based on simulated Doppler observations are presented.

Strachan, Leonard

Measuring electron temperature in the extended corona

A technique for measuring electron temperature in the extended corona from the line profile of the electron scattered component of coronal H I Ly alpha produced by Thomson scattering of chromospheric Ly alpha emission is discussed. Because of the high thermal velocity of electrons at coronal temperatures (approximately 6800 km/s at T(sub e) = 1,500,000 K) the effect of nonthermal velocities and solar wind flows on the electron velocity distribution are negligible. However, the low electron mass which is responsible for the high thermal velocity also results in a very wide profile (approximately equal to 50 A). This wide profile, together with an intensity that is three orders of magnitude weaker than the resonantly scattered component of Ly alpha makes the direct measurement of T(sub e) a challenging observational problem. An evaluation of this technique based on simulated measurements is presented and the subsequent instrumental requirements necessary to make a meaningful determination of the electron temperature are discussed. Estimates of uncertainties in the measured electron temperature are related to critical instrument parameters such as grating stray light suppression.

Hassler, Donald M.

Laboratory studies in ultraviolet solar physics

The research activity comprised the measurement of basic atomic processes and parameters which relate directly to the interpretation of solar ultraviolet observations and to the development of comprehensive models of the component structures of the solar atmosphere. The research was specifically directed towards providing the relevant atomic data needed to perform and to improve solar diagnostic techniques which probe active and quiet portions of the solar chromosphere, the transition zone, the inner corona, and the solar wind acceleration regions of the extended corona. The accuracy with which the physical conditions in these structures can be determined depends directly on the accuracy and completeness of the atomic and molecular data. These laboratory data are used to support the analysis programs of past and current solar observations (e.g., the Orbiting solar Observatories, the Solar Maximum Mission, the Skylab Apollo Telescope Mount, and the Naval Research Laboratory's rocket-borne High Resolution Telescope and Spectrograph). In addition, we attempted to anticipate the needs of future space-borne solar studies such as from the joint ESA/NASA Solar and Heliospheric Observatory (SOHO) spacecraft. Our laboratory activities stressed two categories of study: (1) the measurement of absolute rate coefficients for dielectronic recombination and electron impact excitation; and (2) the measurement of atomic transition probabilities for solar density diagnostics. A brief summary of the research activity is provided.

Parkinson, W. H.

Experimental apparatus for measurements of electron impact excitation

An ion beam apparatus for the absolute measurement of collision cross sections in singly and multiply charged ions is described. An inclined electron and ion beams arrangement is used. Emitted photons from the decay of collision produced excited states are collected by a mirror and imaged onto a photomultiplier. Absolute measurements of the electron impact excitation of the 2s-2p transition in C(3+) were used to demonstrate the reliability of the apparatus.

Lafyatis, G. P.

Remotely Adjustable Hydraulic Pump

Outlet pressure adjusted to match varying loads. Electrohydraulic servo has positioned sleeve in leftmost position, adjusting outlet pressure to maximum value. Sleeve in equilibrium position, with control land covering control port. For lowest pressure setting, sleeve shifted toward right by increased pressure on sleeve shoulder from servovalve. Pump used in aircraft and robots, where hydraulic actuators repeatedly turned on and off, changing pump load frequently and over wide range.

Kouns, H. H.

Experimental apparatus for photon/ion coincidence measurements of dielectronic recombination

An inclined beams apparatus for the measurement of absolute cross sections for dielectronic recombination between free electrons and singly or multiply charged ions is described. The collision products, a photon and a lower-charge-state ion, are detected in delayed coincidence. Measurements of dielectronic recombination in C(3+) are described to illustrate the use of the apparatus and techniques. Verification of the calibrations and operation of the apparatus is demonstrated through measurements of charge transfer and electron impact excitation.

Gardner, L. D.