Engineering topics

Gardner, W. Payton (ORCID:000000030664001X)

Publications and source records attributed to Gardner, W. Payton (ORCID:000000030664001X).

2 records

DOE OSTI2025

Factors influencing water quality in surface water and alluvial groundwaters downgradient of a reclaimed surface coal mine in the Powder River Basin of southeastern Montana, USA

Abstract Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Keeshin, Skye I. (ORCID:0009000986449872)↗

DOE OSTI2024

Electrofracturing of Shale at Elevated Pressure

Electrofracturing deeply buried shale formations could be used to increase reservoir permeability and improve reservoir production without requiring large volumes of freshwater. This paper describes a novel experimental system and initial test results to electrofracture shale under high confining pressures. Core-scale laboratory testing was performed on twelve rock samples recovered from a shale gas reservoir. Each sample was subjected to confining pressures of 20.7 MPa (3000 psi) or 58.6 MPa (8000 psi), representative of overburden pressures at depth. Samples were then subjected to application of high voltage until specimen fracture. The experiments produced deformed samples with multiple fracture types, both parallel and oblique to bedding planes. Electrofracturing increased permeabilities by up to nine orders of magnitude for extended time periods. Rock fracture and throughgoing fractures were demonstrated. Computed tomography images revealed the creation of fractures and tube/tunnel flow channels, which resisted closure under hydrostatic pressures up to 58.6 MPa. The breakdown energy and permeability changes in the sample were independent of applied confining pressure. The cumulative energy input required for fracture depended on applied confining pressure and sample length. The energy required to fracture samples up to 9 cm in length is generally more than 0.5 kJ/cm, but no greater than 1 kJ/cm. Our results show that electrofracture of shales under confining pressure is possible and could be a possible water-free mechanism for reservoir stimulation.

04 OIL SHALES AND TAR SANDS↗