Engineering topics

Garrett, L. B.

Publications and source records attributed to Garrett, L. B..

At least 19 records

NASA NTRS1991

A synthetic aperture microwave radiometer to measure soil moisture and ocean salinity from space

A concept is presented for a microwave radiometer in space to measure soil moisture and ocean salinity as part of an 'Earth Probe' mission. The measurements could be made using an array of stick antennas. The L-band channel (1.4 GHz) would be the primary channel for determining soil moisture, with the S-band (2.65-GHz) and C-band (5.0-GHz) channels providing ancillary information to help correct for the effects of the vegetation canopy and possibly to estimate a moisture profile. A preliminary study indicates that an orbit at 450 km would provide coverage of better than 95 percent of the earth every 3 days. A 10-km resolution cell (at nadir) requires stick antennas about 9.5-m long at L-band. The S-band and C-band sticks would be substantially shorter (5 m and 2.7 m, respectively).

Le Vine, D. M.↗

NASA NTRS1989

A lunar orbiting Node in support of missions to Mars

A conceptual design study yielded an approximate size for the platform needed to support typical oxygen-transfer rates which were based upon NASA studies of Mars missions. The Node consists of a gravity gradient stabilized lunar orbiting tank-farm with a storage capacity of 100,000 kg of lunar oxygen, 3300 kg of lunar cargo, and 9300 kg of earth-supplied hydrogen. An emergency-habitat configuration accommodates 14 persons on-board for 110 days. The Node supports an annual lunar oxygen production of 10 exp 6 kg with 220,000 kg of oxygen delivered to earth orbit for an expenditure of 109,000 kg of earth-supplied hydrogen.

Butterfield, A.↗

NASA NTRS1987

Large space systems requirements, deployable concepts, and technology issues

This paper summarizes some of the future civil missions requiring large space systems technologies. Antenna, collector, and reflector missions are generalized to define a similar set of system requirements and characteristics. Although many concepts exist for both deployable and space assemblable large structures, four technically mature deployable concepts are reviewed. Two of these concepts are probably applicable to only antenna/collector missions, whereas the other two employ continuous trusses which can be configured for a broad range of planar, linear, or curved structures. Finally, technology problems or needs associated with large deployable systems are reviewed to highlight additional research and development, both analytical and experimental, required to reduce mission risk.

Lovelace, U. M.↗

NASA NTRS1985

Dynamic performance of several large antenna concepts

Four antenna concepts the box truss, tetrahedral truss, wrap-radial rib, and hoop and column antenna were examined for the dynamic performance when subjected to an operational environment. Space applications for the concepts are numerous; however, the land mobile satellite system (LMSS) was chosen as a baseline study and its operational constraints are applied to each concept. The dynamic response of each concept is examined for structural displacement and structural damping effects. The necessity of a control system for vibrational displacement reduction is examined along with a comparison of the relative merits of each antenna concept.

Andersen, G. C.↗

NASA NTRS1985

Comparative analysis of on-orbit dynamic performance of several large antenna concepts

A comparative analysis of the on-orbit dynamic performance of four large anetanna concepts is presented. Among the antenna concepts evaluated are: the box truss; tetrahedral truss; warp-radial rib; and the hoop and column antenna designs. The characteristics and magnitudes of the antennas' dynamic response were evaluated in terms of structural displacements and member loads incurred during various slew-rate maneuvers. The results of the dynamic response analysis are compared to the design requirements of the Land Mobile Satellite System (LMSS) with respect to surface accuracy, decenter, defocus, and angular rocking. Comments are made on the effectiveness of structural damping and the application of active controls for vibrational response reduction. Schematic illustrations of the antenna design concepts are provided.

Andersen, G. C.↗

NASA NTRS1984

Maneuvering of large flexible space antennas using optimal discrete-time controllers

The problem of maneuvering large space structures is formulated as a discrete-time, finite-duration optimal regulator problem. Two methods are considered for minimizing the elastic motion during the maneuver. The methods are applied to retargetting maneuver of a large space antenna, and the results are compared with those obtained using bang-bang control. The optimal regulator designed using the model error sensitivity supression method gives the best performance.

Joshi, S. M.↗

NASA NTRS1984

Space systems computer-aided design technology

The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

Garrett, L. B.↗

NASA NTRS1984

Mathematical synthesization of complex structures

A mathematical synthesization approach for rapidly modeling and analyzing complex structures comprised of hundreds or thousands of repeating individual structural members, interconnecting hardware, and other components was described. The techniques are applicable to any structure with repeating structural members. The capabilities are embodied within the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. IDEAS has a full range of integrated spacecraft modeling, design, analysis, performance, and cost estimating capabilities which include about 40 technical program and executive, data base, and file management systems. With IDEAS, a single user at an interactive terminal can create, design, analyze, and conduct parametric studies of Earth orbiting spacecraft in a timely, cost-efficient manner. The system is particularly useful in the conceptual design phases of advanced space missions when a multiplicity of concepts must be evaluated. The IDEAS interactive finite-element modeling capabilities are discussed. The mathematical synthesization programs were structured not only to provide a detailed finite-element model of the structure but also to automatically perform the many auxiliary computations needed to analyze the spacecraft in its orbital operational environment.

Garrett, L. B.↗

NASA NTRS1983

Thermal modeling and analysis of structurally complex spacecraft using the IDEAS system

Large antenna satellites of unprecedented sizes are needed for a number of applications. Antenna diameters on the order of 50 meters and upward are required. Such antennas involve the use of large expanses of lattice structures with hundreds or thousands of individual connecting members. In connection with the design of such structures, the consideration of thermal effects represents a crucial factor. Software capabilities have emerged which are coded to include major first order thermal effects and to purposely ignore, in the interest of computational efficiency, the secondary effects. The Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) is one such system. It has been developed for an employment in connection with thermal-structural interaction analyses related to the design of large structurally complex classes of future spacecraft. An IDEAS overview is presented. Attention is given to a typical antenna analysis using IDEAS, the thermal and loading analyses of a tetrahedral truss spacecraft, and ecliptic and polar orbit analyses.

Garrett, L. B.↗

NASA NTRS1983

Systems design and comparative analysis of large antenna concepts

Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

Garrett, L. B.↗

NASA NTRS1983

Interactive systems analysis of four structural concepts for a Land Mobile Satellite System

Weight and structural analysis data were generated for four structural concepts for a Land Mobile Satellite System (LMSS) using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. Structural concepts analyzed included the wrapped radial rib, box ring, tetrahedral truss, and hoop column. Estimates of total spacecraft weight, structural natural frequencies and modal shapes were determined and compared for several loading conditions for each concept. Spacecraft-induced and environmental effects on antenna performance (surface accuracy, defocus and boresight offset) are quantified.

Ferebee, M. J., Jr.↗

NASA NTRS1983

Comparative analysis of large antenna spacecraft using the ideas system

A Land Mobile Satellite System (LMSS), capable of providing mobile communications for commercial and government applications in nonmetropolitan areas of the continental U.S. and Canada as an augmentation to existing and planned terrestrial systems, is being studied. The satellite system would provide 'narrow band' telecommunications services such as mobile radio, telephone, dispatch, safety, and special radio services, and thin-route fixed telephone and data services in the 806-890 MHz band and continuous emergency beacon monitoring in the 406-406.1 MHz band. A single Shuttle launch with an upper stage orbital transfer system would place the LMSS spacecraft in geosynchronous orbit over the continental U.S. in 1995 with a 10-year lifetime. The present investigation has the objective to evaluate, compare, and rank selected spacecraft concepts, to suggest design improvement to the individual concepts, and to identify technology needs.

Garrett, L. B.↗

NASA NTRS1982

Utility and technology for a space central power station

The technological and economical impacts of a large central power station in Earth orbit on the performance and cost of future spacecraft and their orbital-transfer systems are examined. It is shown that beaming power to remote users cannot be cost-effective if the central power station uses the same power generation system that would be readily available for provision of on-board power. Laser transmitters/receivers to make central power stations feasible are considered. The cost-effectiveness of meeting Earth-orbiting spacecraft electrical demands from a central power station was analyzed, indicating that this application cannot justify the investment required for the central station. Key technology needs which must be met to enable a viable central power station in the future are identified.

Holloway, P. F.↗

NASA NTRS1982

Interactive modeling, design and analysis of large spacecraft

An efficient computer aided design and analysis capability applicable to large space structures was developed to relieve the engineer of much of the effort required in the past. The automated capabilities can be used to rapidly synthesize, evaluate, and determine performance characteristics and costs for future large spacecraft concepts. The interactive design and evaluation of advanced spacecraft program (IDEAS) is used to illustrate the power, efficiency, and versatility of the approach. The coupling of space environment modeling algorithms with simplified analysis and design modules in the IDEAS program permits rapid evaluation of completing spacecraft and mission designs. The approach is particularly useful in the conceptual design phase of advanced space missions when a multiplicity of concepts must be considered before a limited set can be selected or more detailed analysis. Integrated spacecraft systems level data and data files are generated or subsystems and mission reexamination and/or refinement and for more rigorous analyses.

Garrett, L. B.↗

NASA NTRS1981

Comparative analyses of space-to-space central power stations

The technological and economical impact of a large central power station in Earth orbit on the performance and cost of future spacecraft and their orbital transfer systems are examined. It is shown that beaming power to remote users cannot be cost effective if the central power station uses the same power generation system that is readily available for provision of onboard power and microwave transmission and reception of power through space for use in space is not cost competitive with onboard power or propulsion systems. Laser and receivers are required to make central power stations feasible. Remote power transmission for propulsion of orbital transfer vehicles promises major cost benefits. Direct nuclear pumped or solar pumped laser power station concepts are attractive with laser thermal and laser electric propulsion systems. These power stations are also competitive, on a mass and cost basis, with a photovoltaic power station.

Holloway, P. F.↗

NASA NTRS1981

Interactive design and analysis of future large spacecraft concepts

An interactive computer aided design program used to perform systems level design and analysis of large spacecraft concepts is presented. Emphasis is on rapid design, analysis of integrated spacecraft, and automatic spacecraft modeling for lattice structures. Capabilities and performance of multidiscipline applications modules, the executive and data management software, and graphics display features are reviewed. A single user at an interactive terminal create, design, analyze, and conduct parametric studies of Earth orbiting spacecraft with relative ease. Data generated in the design, analysis, and performance evaluation of an Earth-orbiting large diameter antenna satellite are used to illustrate current capabilities. Computer run time statistics for the individual modules quantify the speed at which modeling, analysis, and design evaluation of integrated spacecraft concepts is accomplished in a user interactive computing environment.

Garrett, L. B.↗

NASA NTRS1981

Systems design and analysis of the microwave radiometer spacecraft

Systems design and analysis data were generated for microwave radiometer spacecraft concept using the Large Advanced Space Systems (LASS) computer aided design and analysis program. Parametric analyses were conducted for perturbations off the nominal-orbital-altitude/antenna-reflector-size and for control/propulsion system options. Optimized spacecraft mass, structural element design, and on-orbit loading data are presented. Propulsion and rigid-body control systems sensitivities to current and advanced technology are established. Spacecraft-induced and environmental effects on antenna performance (surface accuracy, defocus, and boresight off-set) are quantified and structured material frequencies and modal shapes are defined.

Garrett, L. B.↗

NASA NTRS1981

Interactive design and analysis of future large spacecraft concepts

Recent developments in interactive computer-aided design and analysis of future large spacecraft concepts are presented. The primary emphases are on automatic spacecraft modeling for lattice (truss-like) structures and simplified multidiscipline design and analysis modules. Capabilities and performance of the twenty some applications modules, the executive and data management software, and graphics display features are reviewed. Data generated for an earth-orbiting large diameter (750 meter) antenna satellite are used to illustrate current capabilities. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting spacecraft with relative ease. The approach is particularly useful in the conceptual design phase of advanced space missions when a multiplicity of concepts must be evaluated in a cost-effective and timely manner

Garrett, L. B.↗