Search NASA⌕ Search

Engineering topics

Garvin, J. B.

Publications and source records attributed to Garvin, J. B..

At least 37 records · Page 2

Topography of Small Volcanoes at the Margin of the Mars North Polar Cap

Putative volcanic craterforms have been observed in the north polar region of Mars since Mariner 9. Hodges and Moore described some of these features for the region they called the 'Borealis Volcanic Field', and suggested that several were formed as a consequence of magma-ice or magmawater interactions. Mars Orbiter Laser Altimeter (MOLA) topographic measurements confirm suggest that the features are unlikely to be of impact origin, and that there are many more of them present around the north polar cap than suspected from images alone. Analysis of one of the larger features--suggested by Hodges and Moore to represent a hydromagmatic explosion crater or maar--showed topographic characteristics more similar to a terrestrial small basaltic shield volcano, possibly of recent origins. Recent work with the MOLA topography has also suggested that the possible volcanic extent of the Borealis Field is substantially larger in both number and range than previously mapped. Since the majority of these features are within 100 km of the present edge of the northern residual polar cap, and several extend into the Chasma Boreale cap re-entrant, they are some of the best Mars candidates for possible magma-water or magma-ice interactions. However, so far, these features have not displayed the expected average slope or other characteristics predicted for martian hydrovolcanic features, or even martian explosive volcanic features. Here, we show some of the range of feature types observed in the topography, along with their characteristic topographic measurements, and compare them to terrestrial and martian volcanic features. Additional information is contained in the original extended abstract.

Sakimoto, S. E. H.↗

MOLA: The Future of Mars Global Cartography

The MGS Orbiter is carrying the high-precision Mars Orbiter Laser Altimeter (MOLA) which, when combined with precision reconstructed orbital data and telemetered attitude data, provides a tie between inertial space and Mars-fixed coordinates to an accuracy of 100 m in latitude / longitude and 10 m in radius (1 sigma), orders of magnitude more accurate than previous global geodetic/ cartographic control data. Over the 2 year MGS mission lifetime, it is expected that over 30,000 MOLA Global Cartographic Control Points will be produced to form the basis for new and re-derived map and geodetic products, key to the analysis of existing and evolving MGS data as well as future Mars exploration. Additional information is contained in the original extended abstract.

Duxbury, T. C.↗

Global Geometric Properties of Martian Impact Craters: A Preliminary Assessment Using Mars Orbiter Laser Altimeter (MOLA)

Impact craters on Mars have been used to provide fundamental insights into the properties of the martian crust, the role of volatiles, the relative age of the surface, and on the physics of impact cratering in the Solar System. Before the three-dimensional information provided by the Mars Orbiter Laser Altimeter (MOLA) instrument which is currently operating in Mars orbit aboard the Mars Global Surveyor (MGS), impact features were characterized morphologically using orbital images from Mariner 9 and Viking. Fresh-appearing craters were identified and measurements of their geometric properties were derived from various image-based methods. MOLA measurements can now provide a global sample of topographic cross-sections of martian impact features as small as approx. 2 km in diameter, to basin-scale features. We have previously examined MOLA cross-sections of Northern Hemisphere and North Polar Region impact features, but were unable to consider the global characteristics of these ubiquitous landforms. Here we present our preliminary assessment of the geometric properties of a globally-distributed sample of martian impact craters, most of which were sampled during the initial stages of the MGS mapping mission (i.e., the first 600 orbits). Our aim is to develop a framework for reconsidering theories concerning impact cratering in the martian environment. This first global analysis is focused upon topographically-fresh impact craters, defined here on the basis of MOLA topographic profiles that cross the central cavities of craters that can be observed in Viking-based MDIM global image mosaics. We have considered crater depths, rim heights, ejecta topologies, cross-sectional "shapes", and simple physical models for ejecta emplacement. To date (May, 1999), we have measured the geometric properties of over 1300 impact craters in the 2 to 350 km diameter size interval. A large fraction of these measured craters were sampled with cavity-center cross-sections during the first two months of MGS mapping. Many of these craters are included in Nadine Barlow's Catalogue of Martian Impact Craters, although we have treated simple craters smaller than about 7 km in greater detail than all previous investigations. Additional information is contained in the original extended abstract.

Garvin, J. B.↗

Martian Polar Impact Craters: A Preliminary Assessment Using Mars Orbiter Laser Altimeter (MOLA)

Our knowledge of the age of the layered polar deposits and their activity in the volatile cycling and climate history of Mars is based to a large extent on their apparent ages as determined from crater counts. Interpretation of the polar stratigraphy (in terms of climate change) is complicated by reported differences in the ages of the northern and southern layered deposits. The north polar residual ice deposits are thought to be relatively young, based on the reported lack of any fresh impact craters in Viking Orbiter Images. Herkenhoff et al., report no craters at all on the North polar layered deposits or ice cap, and placed an upper bound on the surface age (or, alternatively, the vertical resurfacing rate) of 100 thousand years to 10 million years, suggesting that the north polar region is an active resurfacing site. In contrast, the southern polar region was found to have at least 15 impact craters in the layered deposits and cap. Plaut et al, concluded that the surface was less than or = 120 million years old. This reported age difference factor of 100 to 1000 increases complexity in climate and volatile modeling. Recent MOLA results for the topography of the northern polar cap document a handful or more of possible craters, which could result in revised age or resurfacing estimates for the northern cap. This study is a preliminary look at putative craters in both polar caps. Additional information is contained in the original extended abstract.

Sakimoto, S. E. H.↗

The global topography of Mars and implications for surface evolution

Elevations measured by the Mars Orbiter Laser Altimeter have yielded a high-accuracy global map of the topography of Mars. Dominant features include the low northern hemisphere, the Tharsis province, and the Hellas impact basin. The northern hemisphere depression is primarily a long-wavelength effect that has been shaped by an internal mechanism. The topography of Tharsis consists of two broad rises. Material excavated from Hellas contributes to the high elevation of the southern hemisphere and to the scarp along the hemispheric boundary. The present topography has three major drainage centers, with the northern lowlands being the largest. The two polar cap volumes yield an upper limit of the present surface water inventory of 3.2 to 4.7 million cubic kilometers.

Water↗

Near-Polar Cratered Cones on Mars: Mola Measurements and Implications for Volcanic Origins

Near-polar craterforms have been observed on Mars since Mariner 9. Hodges and Moore [1,2] described the implications of these apparently volcanic features and suggested that several were formed as a consequence of magma-ice or magma-water interactions. Indeed, they proposed that the feature illustrated in Fig. I represents a hydromagmatic explosion crater or maar, indicating interaction of ground-ice and/or water with magma in the higher Northern hemisphere latitudes of Mars. The advent of Mars Orbiter Laser Altimeter (MOLA) topographic information 161 for several of the putative volcanic craterforms described in [1,2] allows a reconsideration of their formation mechanisms. We have exploited MOLA's near-centerline cross-sections from the Science Phasing Orbit phase of the Mars Global Surveyor (MGS) mission to analyze the geometric properties of these features as constraints on their modes of origin and subsequent modification histories. From our preliminary analyses, we believe there is evidence these features may have been formed by effusive, lava shield building eruptions, and not hydromagmatic events. Furthermore, geometrical constraints indicate that some of the near-polar craterforms are geologically youthful.

Garvin, J. B.↗

Regional Elevations in the Southern Hemisphere of Mars From the Mars Orbiter Laser Altimeter

The Mars Orbiter Laser Altimeter (MOLA) is an instrument on the Mars Global Surveyor (MGS) spacecraft that is currently providing the first high vertical and spatial resolution topographic measurements of surface elevations on Mars. The shot size in the mapping orbit is about 100 m and the shot-to-shot spacing is 330 m. The instrument has a vertical precision of 37.5 cm and a vertical accuracy that depends on the radial accuracy of the MGS orbit that is currently in the range 5-30 km. The initial focus on observations in the nominal mapping mission will be on the southern hemisphere, which was not sampled during the MGS aerobraking hiatus and Science Phasing orbits. During the first several weeks of global mapping there will be emphasis on producing a digital terrain model (DTM) of the Mars '98 landing site.

Smith, D. E.↗

Observations of the north polar region of Mars from the Mars orbiter laser altimeter

Elevations from the Mars Orbiter Laser Altimeter (MOLA) have been used to construct a precise topographic map of the martian north polar region. The northern ice cap has a maximum elevation of 3 kilometers above its surroundings but lies within a 5-kilometer-deep hemispheric depression that is contiguous with the area into which most outflow channels emptied. Polar cap topography displays evidence of modification by ablation, flow, and wind and is consistent with a primarily H2O composition. Correlation of topography with images suggests that the cap was more spatially extensive in the past. The cap volume of 1.2 x 10(6) to 1.7 x 10(6) cubic kilometers is about half that of the Greenland ice cap. Clouds observed over the polar cap are likely composed of CO2 that condensed out of the atmosphere during northern hemisphere winter. Many clouds exhibit dynamical structure likely caused by the interaction of propagating wave fronts with surface topography.

Flight Experiment↗

Topography of the northern hemisphere of Mars from the Mars Orbiter Laser Altimeter

The first 18 tracks of laser altimeter data across the northern hemisphere of Mars from the Mars Global Surveyor spacecraft show that the planet at latitudes north of 50 degrees is exceptionally flat; slopes and surface roughness increase toward the equator. The polar layered terrain appears to be a thick ice-rich formation with a non-equilibrium planform indicative of ablation near the periphery. Slope relations suggest that the northern Tharsis province was uplifted in the past. A profile across Ares Vallis channel suggests that the discharge through the channel was much greater than previously estimated. The martian atmosphere shows significant 1-micrometer atmospheric opacities, particularly in low-lying areas such as Valles Marineris.

unmanned↗

Ice-Associated Impact Craters on Mars: Implications from MOLA Observations

Impact features adjacent to the permanent North Polar Cap on Mars provide a unique perspective on the crater formation and modification process. Little attention has been previously paid to the dozen's of ice-associated or 'frost-filled' craters north of 70N on Mars. We have examined Mars Orbiter Laser Altimeter (MOLA) cross-sections of 13 of these features between 7ON and 82N in an effort to understand cavity modification processes potentially associated with the advance and retreat of the North Polar ice cap. Here we treat the general geometric properties of these impact features and focus attention on one almost entirely filled example (i.e., 32 km diameter, located at 77N, 89E) for which high resolution Viking Orbiter images (50 m per pixel) provide key constraints for interpreting MOLA's meter-precision topographic measurements.

Garvin, J. B.↗