Search NASA⌕ Search

Engineering topics

Gaspar, Daniel J.

Publications and source records attributed to Gaspar, Daniel J..

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Potential Adoption and Benefits of Co-Optimized Multimode Engines and Fuels for U.S. Light-Duty Vehicles

Exploring a diverse portfolio of technologies for decarbonization is crucial to understanding the potential impacts of different technological solutions and their associated environmental implications. Using high-octane, high-sensitivity biofuel blends in co-optimized multimode engines can increase engine efficiency and reduce vehicle emissions. Here, the multimode engine research focuses on the benefits of light-duty vehicle engines, which can operate in multiple modes depending on the vehicle's load. Low-temperature combustion can improve efficiency and reduce emissions (such as those from oxides of nitrogen and particulate matter) during low-load operation, while spark ignition performance is maintained in high-load operation. These advanced engines can be optimized to run on blends of biobased fuels. This analysis models scenarios for potential market adoption of co-optimized multimode vehicles fueled by three different bioblendstocks: ethanol, isopropanol, and isobutanol. An integrated modeling approach is used to forecast the energy and environmental impacts of the deployment of co-optimized multimode vehicles and fuels in the light-duty sector over the 2020-to-2050 time horizon. The multidisciplinary approach combines vehicle sales modeling, system dynamics modeling of the biorefining industry, and life cycle assessment to estimate the emissions and energy benefits. The models consider market forces such as consumer preferences for vehicle attributes, biofuel supply and demand dynamics subject to biorefinery capacity build-out and bioresource constraints, and forecasted changes to the U.S. bulk energy system over time. Market adoption of co-optimized vehicles is evaluated across a wide parameter space for incremental vehicle cost and engine efficiency improvement. This analysis reveals that the deployment of co-optimized multimode fuels and vehicles results in up to a 5% reduction in annual sector-wide life cycle greenhouse gas (GHG) emissions by 2050, relative to a business-as-usual scenario, but is also indicates environmental trade-offs, such as higher life cycle water-use. Emission benefits could potentially increase beyond 2050, as the new technologies penetrate the market and gain a foothold. Results also show that, under certain circumstances, vehicles with engines co-optimized for use with high-octane, high-sensitivity biofuel blends can be cost-competitive with conventional gasoline, while reducing GHG emissions. Our modeling results indicate that co-optimized multimode fuels and engines can be strategically leveraged in tandem with electrification to decarbonize the light-duty sector. Co-optimized vehicles could play a role in the early years of the time horizon, while electric vehicles (EVs) could become more competitive in the later years, highlighting the complementary benefits of these technologies for GHG reductions.

Oke, Doris↗
DOE OSTI2023

The effect of chemical functional groups on the octane sensitivity of fuel blends for spark-ignited and multimode engines

We report the octane sensitivity of fuel blends containing blendstocks of diverse chemical functionalities blended in concentrations up to 20% by volume into BOBs (Blendstocks for Oxygenate Blending). This study focuses on the blendstocks containing functional groups which lack reliable octane number data. The effects on octane sensitivity of blends of cyclopropanes, alkyl carbonates, oxiranes, alcohols, ketones, esters, nitrogen-containing compounds, cyclic and olefinic hydrocarbons, multifunctional materials containing combinations of these functionalities, and the co-blends of the blendstocks with ethanol in a BOB have been evaluated. Octane sensitivity of the blends containing functional groups that haven’t been evaluated before are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Economic analysis of the benefits to petroleum refiners for low carbon boosted spark ignition biofuels

A refinery modeling framework is developed to estimate the benefits of blending high-quality biofuels directly with refinery gasoline components for attaining a premium grade fuel (also termed as Co-Optima Boosted SI gasoline here). Our results change the paradigm of bio-blendstocks (BBs) being competitors to fossil components, by identifying opportunities for refineries to add value to their product slate, from some favorable BB properties. This potential value can be characterized by calculating the breakeven value (BEV), as defined down below. The proposed modeling framework incorporates extensive data from (1) projected product over the next few decades, (2) crude oil and refinery products pricing, and (3) fuel specifications. The complete refinery models serve as a basis for assessing the value of biofuels, assuming profitability remains the same for representative petroleum refinery configurations. Our assessment showed wide range of variation of biofuels BEV from $\$$20-$\$$120/bbl, within the considered blending level and crude prices. Further, the BEV was correlated with the fuel octane ratings such as octane numbers (research, RON and motor octane numbers, MON) and both antiknock index (AKI, average of RON and MON) and sensitivity (S, difference between RON and MON), with a slightly higher correlation with the sensitivity. However, the expected decrease in gasoline demand for the upcoming years could negatively impact biofuels demand and value, in a business-as-usual scenario. Our analysis also showed a more valuable bio-blendstocks incorporation in smaller refineries since they can enhance the capabilities for producing specialty, high-value fuels/products, and introduce high octane-barrels into otherwise constrained blending operations. Additional implications towards refiners include opportunities to rebalance operations, access to high-value fuel markets, and synchronization with broader transportation industry trends. Furthermore, results indicate the value of Co-Optima boosted spark ignition (BSI) efficiency gains can extend to refiners to incentivize decarbonization and diversified feedstock production.

09 BIOMASS FUELS↗
DOE OSTI2022

Economic and Environmental Analysis to Evaluate the Potential Value of Co-Optima Diesel Bioblendstocks to Petroleum Refiners

The U.S. petroleum refining sector is undergoing a period of historic transformation, catalyzed by the decarbonization of the U.S. economy. Diesel-boiling-range bioblendstocks have gained traction, owing to their superior fuel properties and environmental performance as compared to traditional petroleum fuels. This work couples refinery linear programming models with life cycle assessment to quantify the potential economic and environmental benefits, and trade-offs, of blending diesel-boiling-range bioblendstocks at petroleum refineries. Linear programming models were developed in Aspen Process Industry Modeling Systems (PIMS) for three representative petroleum refinery configurations of differing complexity. Seven diesel-boiling-range bioblendstocks: 4-butoxyheptane, 5-ethyl-4-propylnonane, soy biodiesel, sludge hydrothermal liquefaction diesel, polyoxymethylene ethers, renewable diesel, and hexyl hexanoate, were investigated to identify key fuel properties that influence refineries' economics and to track the effect of adding bioblendstocks on refinery-wide cradle-to-gate greenhouse gases (GHG) emissions. These analyses considered blending levels from 10 to 30 vol% and fuel demand projections over the period 2040 to 2050. This analysis determines that bioblendstock sulfur content and cetane number are the primary fuel attributes with the potential to provide value to refiners. Life cycle assessment results indicate that the use of diesel-boiling-range bioblendstocks can reduce cradle-to-gate refinery GHG emissions by up to ~ 40 % relative to conventional refinery operations when considering carbon uptake in the supply chain of the bioblendstock. Refinery-wide marginal GHG abatement costs range from 120 to 3,600 USD2016/metric tons carbon dioxide equivalent avoided across the scenarios evaluated. Reducing the price of bioblendstocks is identified as a key to their adoption.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS,ENERGY P↗
DOE OSTI2022

Building and Executing Aggressive Research Plans in a Large National Laboratory Consortium: Insights from the Co-Optimization of Fuels and Engines Initiative

This report describes lessons learned in the establishment, execution and termination of a large, multi-institutional consortium, derived from the Co-Optimization of Fuels and Engines experience. The decision to form a consortium comes with benefits (in advancing challenging multidisciplinary research) and costs (in time and additional management funds). Once the decision is made, key elements to a strong start include establishing a shared vision and goals; engaging an experienced project manager early; instituting feedback and oversight mechanisms to ensure relevance, strong performance, and situational awareness. Once a consortium is up and running, DOE and leadership should strike the right balance between competition and collaboration; foster an environment that builds trust; and adjust the organizational structure as needed to maintain collaboration. Finally, DOE and the labs can plan effectively for a smooth transition as a consortium winds down. This report provides some additional lessons and details on these lessons that we hope future DOE and lab leaders will find useful as they contemplate standing up new consortia.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Production, fuel properties and combustion testing of an iso-olefins blendstock for modern vehicles

With the increasing pressure to decarbonize the transportation sector, exploring strategies that can reduce emissions from light-duty vehicles (LDV) has become critical. Bioblendstocks that allow for higher engine efficiency and fuel economy could complement vehicle electrification and help reach carbon neutrality by 2050. In this context, the potential of a mixture of iso-olefins as a bioblendstock was investigated for multimode boosted spark-ignition (SI)/advanced compression ignition (ACI) engine operation designed to achieve higher overall vehicle fuel economy. By establishing the relationship between the molecular structure of iso-olefins and research octane number (RON), octane sensitivity (S) (i.e., the difference between RON and motor octane number [MON]), and phi-sensitivity a dimethyl-hexenes rich olefins mixture (DMHROM) was identified as a preferred blendstock for SI/ACI combustion engines. Here, a pathway for DMHROM production from biomass-derived ethanol was developed and scaled up. More than 1 gallon of DMHROM blendstock was produced for fuel properties assessment including engine testing. Measurements in a Cooperative Fuel Research Engine showed that the DMHROM blendstock possesses a RON of 94 and S of 13.5, and blends synergistically. Rapid compression machine tests coupled with single-cylinder gasoline direct injection engine measurements demonstrated the 20 vol.% DMHROM blend has higher phi-sensitivity than an olefin-free gasoline base fuel and a typical California Reformulated Gasoline Blendstock for Oxygenate Blending (CARBOB) gasoline fuel. These results demonstrate the potential of DMHROM for improving gasoline fuel performance and quality for operation under ACI conditions. The effectiveness of the aftertreatment system in mitigating emissions was verified and showed that the pure DMHROM blendstock and 20 vol.% blend would not increase non-methane organic gases, NO x , and carbon monoxide (CO) emissions. The DMHROM blendstock was found to slightly decrease sooting tendency when added to a gasoline-base fuel (i.e., ~6% reduction at 20 vol.% blending level). Oxidation stability and lubricant compatibility were both confirmed for the 20 vol.% blend. Overall, these results demonstrate that dimethyl-hexenes have potential for improving engine efficiency and fuel economy while meeting emissions regulations and ASTM specifications for gasoline fuel.

09 BIOMASS FUELS↗
DOE OSTI2021

Potential Economic Values of Low-Vapor-Pressure Gasoline-Range Bio-Blendstocks: Property Estimation, and Blending Optimization

Adding non-traditional blendstocks derived from biomass into gasoline has gained renewed interest since it will reduce greenhouse gas emissions and potentially enhance fuel properties and boost engine efficiencies. A competitive bio-blendstock candidate should have either lower prices or superior properties or both relative to conventional gasoline blending components. Gasoline is a mixture of hundreds compounds specified by properties rather than compositions. The addition of bio-blendstocks, most likely oxygenates, will modify the property mixing rules due to the non-ideal interactions between polar and nonpolar components. This paper presents an equation-of-state-based model for predicting Reid vapor pressure, reduced order non-linear property blending models for computing key properties of final gasoline products, and a blending optimization approach to identify key economic drivers. This paper also evaluates the economic values of bio-blendstocks to petroleum refiners using those models. In additional to ethanol, six low-vapor-pressure bio-blendstock candidates were evaluated: i-propanol, n-propanol, i-butanol, diisobutylene, cyclopentanone, and a mixture of furans. Reid vapor pressure, distillation temperatures, and octane numbers were identified as the key economic drivers of adding bio-blendstock. The economic values of those bio-blendstocks range from 2.22 to 4.00 US dollar per gasoline gallon equivalent in 2013 to 2017 5-year averaged price basis. The bio-blendstocks with higher octane numbers may have higher economic values. The uncertainties in property predictions may lead to roughly 15% deviation in the economic value evaluation.

Jiang, Yuan↗
DOE OSTI2021

Top 13 Blendstocks Derived from Biomass for Mixing-Controlled Compression-Ignition (Diesel) Engines: Bioblendstocks with Potential for Decreased Emissions and Improved Operability

Reducing the impacts of medium- and heavy-duty (MD/HD) ground transportation can be enabled by fuel-engine combinations that use lower compression ignition liquid fuels and reduce criteria pollutant emissions. Fuels and blendstocks combined with advanced engine technologies could reduce the cost of ownership and the emission of pollutants, including soot, nitrogen oxides (NOx) and greenhouse gases (GHGs), from MD/HD vehicles. This report describes the evaluation and screening of MD/HD mixing-controlled compression ignition (MCCI) biofuel candidates for further development and commercialization. The report is aimed at 1) biofuel researchers looking to better understand options to reduce criteria pollutant and GHG emissions while maintaining efficiency and meeting requirements for engine operability and 2) engine researchers who want to evaluate biofuels that meet diesel fuel properties for their impact on conventional and advanced diesel combustion strategies.

09 BIOMASS FUELS↗
DOE OSTI2021

Tracking and Protecting High-Value/High-Visibility Assets

Pacific Northwest National Laboratory’s (PNNL’s) Independent Oversight (IO) office led an assessment to evaluate PNNL’s approach to tracking and protecting high-value/high-visibility assets. The approach used by the assessment team included a review of requirements (including records), staff interviews, on-site and virtual walkthroughs of lab spaces, review of data, and the development of three separate workflows to capture PNNL’s current practices in the areas of controlled substances, select toxins, and precious metals. Summary results are provided within the report, including all findings and opportunities for improvement (OFIs).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Fuel Property Effects of a Broad Range of Potential Biofuels on Mixing Control Compression Ignition Engine Performance and Emissions

Conventional diesel engines will continue to hold a vital role in the heavy- and medium-duty markets for the transportation of goods along with many other uses. The ability to offset traditional diesel fuels with low-net-carbon biofuels could have a significant impact on reducing the carbon footprint of these vehicles. A prior study screened several hundred candidate biofuel blendstocks based on required diesel blendstock properties and identified 12 as the most promising. Eight representative biofuel blendstocks were blended at a 30% volumetric concentration with EPA certification ultra-low-sulfur diesel (ULSD) and were investigated for emissions and fuel efficiency performance. This study used a single cylinder engine (based on the Ford 6.7L engine) using Conventional Diesel Combustion (CDC), also known as Mixing Control Compression Ignition (MCCI). The density, cetane number, distillation curve and sooting tendency (using the yield sooting index method) of the fuels were measured. Start of injection (SOI) timing and exhaust gas recirculation (EGR) sweeps were conducted at three separate speed-load operating points to examine fuel effects on the NOX/soot and NOX/efficiency trade-offs as well as to evaluate EGR tolerance. The results show that the biofuel blends all reduced NOX and soot emissions without penalty to engine efficiency, even improving efficiency for some of the blends at certain points, with one particular blend of polyoxymethylene ethers (POMEs) improving efficiency at all points while drastically reducing soot by 79%.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

The quest for efficient oxygenated fuels: Examining interactions between lubricant components and oxygenates

This work empirically evaluated oxygenated blendstock-lubricant compatibility using a novel but simple method. The reactivity or compatibility was evaluated via gas chromatograph equipped with a flame ionization detector (GC-FID) before and after heating for 2h at 150 °C, which would roughly mimic conditions encountered in the combustion chamber of an Spark Ignition (SI) or Compression-Ignition (CI) engine. Five oxygenate blendstocks spanning several functional groups and chain lengths (prenol, isoprenol, butyl acetate, isohexanol, polyoxymethylene dimethyl ethers) were evaluated in a base fuel with nine variations of lubricant components of controlled concentrations, including fully formulated commercial lubricants. Baseline comparative examples were also generated, to decouple the effect of the oxygenate on the mixture, by heating only the base fuel with the lubricant component. Results demonstrate the relative compatibility between noted lubricants and oxygenates in base fuel upon heating. This was illustrated by minimal to no changes in the GC-FID traces. However, reactions of several of the chosen lubricants, especially Molybdenum di (2-ethylhexyl) phosphorodithioate (Molyvan L) and zinc dialkyldithiophosphate (ZDDP), with prenol and polyoxymethylene dimethyl ethers blendstocks showed substantial side reactions compared to corresponding baseline examples. Control experiments without oxygenates but comprising the same lubricant components showed no change in the mixture with heating. We concluded the incompatibility is due to the oxygenate and not the components of the base fuel. This preliminary work is valuable in establishing trends as well as provide useful information when a new component is introduced in the fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Production and Fuel properties of Iso-Olefins with Controlled Molecular Structure and Obtained from Butene Oligomerization

The ability to control the molecular structure (e.g., degree of branching) of iso-olefins produced from oligomerizing light olefins is a valuable tool for tuning the final compositions of hydrocarbon fuels and targeting specific fuel properties. In this study, we demonstrated that the degree of branching of iso-olefins obtained from butene(s) oligomerization can be controlled by tuning process conditions (i.e., temperature, weight hourly space velocity [WHSV], and nature of butene feedstock) and by choosing the proper catalyst (i.e., Amberlyst-36 vs. Y/ZSM-22). In this study, we produced three types of iso-olefin mixtures: 1) a methyl-heptenes rich (74 wt.%) mixture, 2) dimethyl-hexenes rich (80–96 wt.%) mixtures, and 3) highly branched (i.e., more than three methyl substitutions) iso-olefins rich (>50 wt.%) mixtures. While dimethyl-hexenes are preferentially formed at lower temperatures (60–100°C) and WHSV (i.e., 2 hr-1), methyl-heptenes are favorably produced at higher temperatures (>100°C) and WHSVs (i.e., 7 hr-1) over Amberlyst-36. The use of either 1-butene or 2-butene as feedstock resulted in liquid products with similar branching because facile intramolecular isomerization occurs prior to oligomerization. However, the use of isobutylene feedstock forms a significantly more branched olefin product. The formation of highly branched iso-olefins also is favored at higher temperature (140°C) over Amberlyst-36. Using Y/ZSM-22 instead of Amberlyst-36 allowed preferential formation of less-branched methyl-heptenes. For each type of iso-olefins mixture, we determined fuel properties including research octane number (RON), motor octane number (MON), and octane sensitivity (S), which is the difference between RON and MON. We found that not only RON and MON but also S values increased with the degree of branching of these complex mixtures of iso-olefins. The highest RON of 99.7 and S value of 9.3 were obtained for a mixture of highly branched iso-olefins.

Dagle, Vanessa↗