Engineering topics
Publications and source records attributed to Gaulding, Ashley.
We have seen cases of glass in PV modules breaking differently, and more often, than it did five years ago. There have been many changes to PV module design and materials in that time. But there is probably no single change that is responsible for the problem. Here we summarize the current thinking on PV glass breakage in utility-scale power plants. We share insights from multiple still-running projects at NREL.
Not Available
Photovoltaic modules from a utility-scale field experienced power loss by light- and elevated temperature-induced degradation (LeTID). Samples of one of the affected monocrystalline silicon cells were cored and extracted from the module packaging and encapsulation. One of the cell fragments was processed using a regeneration cycle of applying short-circuit-rated current in forward bias at 85 degrees C for 2 weeks, while the other fragment was kept in its outdoor-degraded LeTID state. Both samples were scribed to form 2-mm diameter isolated areas using a femtosecond-pulse-width laser micromachining system. Both isolated areas contained front grid line segments which were wire bonded to larger contact pads, and the samples were probed in a cryostat linked to a deep-level transient spectroscopy (DLTS) system. Using DLTS, a majority-carrier, hole-trap defect was detected on each sample with an activation energy of 0.42 eV. The LeTID-degraded sample, however, had a larger signal corresponding to a trap density of 1.1x10^13 cm-3, which was about five times larger than the 2.1x10^12 cm-3 trap density of the regenerated sample.
As photovoltaic (PV) deployments increase, the increasing material volume presents challenges throughout the supply chain and eventual end-of-life waste management. Quantifying the value of lifetime, reliability, repair, reuse, recycling, and other options to increase circularity can help identify and prioritize research and technical solutions required to integrate PV into the circular economy. In this work, we capture the evolution of PV module technology, such as improved reliability and increasing market share of glass/glass modules. We discuss material circularity, lifetime and reliability, and energy return on investment as quantitative metrics to define and evaluate circularity and sustainability.