Search NASA⌕ Search

Engineering topics

Gauthier, Joseph A.

Publications and source records attributed to Gauthier, Joseph A..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sub-volt conversion of activated biochar and water for H 2 production near equilibrium via biochar-assisted water electrolysis

Sluggish water oxidation reactions limit water electrolysis for H 2 production, which can be alleviated by the use of carbon-based ma- terials like agricultural wastes as reducing agents. Biochar from such biomass can reduce equilibrium cell potentials at standard condi- tions from 1.23 V to 0.21 V by avoiding direct water splitting at the anode. However, some challenges hinder biochar oxidation, including poor biochar binding, electrode caking, and surface passivation. We find that enhanced C/O ratio, crystallinity, and negative zeta potential improve biochar oxidation kinetics at mod- erate temperatures. Smaller particle sizes and better mixing pre- vent electrode caking, enhancing biochar stability. Here, we report sub-volt biochar-coupled H 2 production, often referred to as a bio- char-assisted water electrolysis (BAWE), yielding 250 mA/g cat H 2 current at 100% Faradaic efficiency. Over 1 mA current was observed at a near-equilibrium cell potential of 0.2 V cell potential. Using a single-junction solar cell-powered BAWE, 15 mA H 2 is generated at 1 Sun, resulting in 4.8% solar-to-hydrogen efficiency, equivalent to 35% when the energy of H 2 relative to H 2 O (without biochar) is assumed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The mechanism for acetate formation in electrochemical CO (2) reduction on Cu: selectivity with potential, pH, and nanostructuring

Nanostructured Cu catalysts have increased the selectivities and geometric activities for high value C–C coupled (C 2 ) products (ethylene, ethanol, and acetate) in the electrochemical CO (2) reduction reaction (CO (2) RR). The selectivity among the high-value C 2 products is also altered, where for instance the yield of acetate increases with alkalinity and is dependent on the catalyst morphology. The reaction mechanisms behind the selectivity towards acetate vs. other C 2 products remain controversial. In this work, we elucidate the reaction mechanism for acetate formation by using ab initio simulations, a coupled kinetic-transport model, and loading dependent experiments. We find that trends in acetate selectivity can be rationalized from variations in electrolyte pH and the local mass transport properties of the catalyst and not from changes in Cu's intrinsic activity. The selectivity mechanism originates from the transport of ketene, a stable (closed shell) intermediate, away from the catalyst surface into solution where it reacts to form acetate. While this type of mechanism has not yet been discussed in the CO (2) RR, variants of it may explain similar selectivity fluctuations observed for other stable intermediates like CO and acetaldehyde. Our proposed mechanism suggests that acetate selectivity increases with increasing pH, decreasing catalyst roughness and significantly varies with the applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pathways for the Formation of C 2+ Products under Alkaline Conditions during the Electrochemical Reduction of CO 2

Establishing how Cu facilitates the electrochemical CO 2 reduction reaction (CO2RR) to C 2+ products remains a critical challenge. Under typical reaction conditions, the pH near the electrode is considerably more alkaline than that in the bulk due to mass transport limitations. Challenges with probing alkaline pathways using computational methods have limited understanding of the CO2RR under experimentally relevant conditions. In this work, using the Volmer reaction on Cu (100), we demonstrate that predicted activation barriers can substantially differ between acidic and alkaline pathways. We compute reaction energetics for alkaline *CO protonation and find that, while the formation of *CHO is preferred thermodynamically, the formation of *COH is favored kinetically at high overpotential. However, we find formation of *CHO via reaction of *H and *CO feasible at room temperature. Further, we report potential-dependent energetics for forming the first C-C bond in CO2RR and find that CO dimerization likely dominates. Finally, we investigate how long-range van der Waals interactions impact our results by comparing to the meta-GGA B97M-rV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Challenges for density functional theory: calculation of CO adsorption on electrocatalytically relevant metals

Density Functional Theory (DFT) is currently the most tractable choice of theoretical model used to understand the mechanistic pathways for electrocatalytic processes such as CO 2 or CO reduction. In this work, we assess the performance of two DFT functionals designed specifically to describe surface interactions, RTPSS and RPBE, as well as two popular meta-GGA functionals, SCAN and B97M-rV, that have not been a priori optimized for better interfacial properties. We assess all four functionals against available experimental data for prediction of bulk and bare surface properties on four electrocatalytically relevant metals, Au, Ag, Cu, and Pt, and for binding CO to surfaces of these metals. To partially mitigate issues such as thermal and anharmonic corrections associated with comparing computations with experiments, molecular benchmarks against high level quantum chemistry are reported for CO complexes with Au, Ag, Cu and Pt atoms, as well as the CO–water complex and the water dimer. Overall, we find that the surface modified RPBE functional performs reliably for many of the benchmarks examined here, and the meta-GGA functionals also show promising results. Specifically B97M-rV predicts the correct site preference for CO binding on Ag and Au (the only functional tested here to do so), while RTPSS performs well for surface relaxations and binding of CO on Pt and Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomistic Insight into Cation Effects on Binding Energies in Cu-Catalyzed Carbon Dioxide Reduction

Electrolyte properties in general and electrolyte ions in particular have been shown to have significant effects on the kinetics of electrochemical CO 2 and CO reduction at metal electrodes, but these effects have not yet been fully understood. Here, we investigate the effects of cations at the aqueous electrolyte–Cu(211) interface on adsorbate binding energies and the electrolyte structure using density functional theory (DFT). Charging the interface via explicit Na + has systematic effects on adsorbate–electrolyte interactions and conformations. We describe specific local adsorbate–ion interactions, including direct alkali ion–adsorbate coordination and hydrogen bonding via ion-coordinated water molecules. The relative importance of these specific interactions and purely electrostatic field–adsorbate interactions is investigated by comparing the DFT-calculated ion effects to those predicted by purely electrostatic models of the interface and the adsorbates. We find that the trend in ion effects among different adsorbates at constant surface charge density is well explained by a purely electrostatic interaction model. The binding energy of OCCHO is found to depend strongly on the surface charge density as well as the spatial distribution of ions at constant surface charge density. These effects are also explained by a purely electrostatic local electrostatic field–adsorbate model. This indicates that alkali ion effects can be mainly attributed to purely electrostatic field interactions and that the local field at ion-stabilized active sites can depend significantly on both the overall charge density and on the spatial distribution of ions at constant charge density. This work provides new insight on alkali ion effects on a variety of adsorbates relevant to the CO 2 and CO reduction reactions by describing specific local ion–adsorbate interactions, systematic changes in adsorbate–electrolyte interactions induced by explicit surface charge, and comparisons of the calculated effects on binding energies to simple electrostatic field–adsorbate models to explain trends among various adsorbates and at varying surface charge densities and supercell configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Solvation at metal/water interfaces: An ab initio molecular dynamics benchmark of common computational approaches

Determining the influence of the solvent on electrochemical reaction energetics is a central challenge in our understanding of electrochemical interfaces. To date, it is unclear how well existing methods predict solvation energies at solid/liquid interfaces, since they cannot be assessed experimentally. Ab initio molecular dynamics (AIMD) simulations present a physically highly accurate, but also a very costly approach. In this work, we employ extensive AIMD simulations to benchmark solvation at charge-neutral metal/water interfaces against commonly applied continuum solvent models. We consider a variety of adsorbates including *CO, *CHO, *COH, *OCCHO, *OH, and *OOH on Cu, Au, and Pt facets solvated by water. The surfaces and adsorbates considered are relevant, among other reactions, to electrochemical CO 2 reduction and the oxygen redox reactions. We determine directional hydrogen bonds and steric water competition to be critical for a correct description of solvation at the metal/water interfaces. As a consequence, we find that the most frequently applied continuum solvation methods, which do not yet capture these properties, do not presently provide more accurate energetics over simulations in vacuum. We find most of the computed benchmark solvation energies to linearly scale with hydrogen bonding or competitive water adsorption, which strongly differ across surfaces. Furthermore, we determine solvation energies of adsorbates to be non-transferable between metal surfaces, in contrast to standard practice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Implications of the fractional charge of hydroxide at the electrochemical interface

Rational design of materials that efficiently convert electrical energy into chemical bonds will ultimately depend on a thorough understanding of the electrochemical interface at the atomic level. Towards this goal, the use of density functional theory (DFT) at the generalized gradient approximation (GGA) level has been applied widely in the past 15 years. In the calculation of electrochemical reaction energetics using GGA-DFT, it is frequently implicitly assumed that ions in the Helmholtz plane have unit charge. However, the ion charge is observed to be fractional near the interface through both a capacitor model and through Bader charge partitioning. In this work, we show that this spurious charge transfer can be effectively mitigated by continuum charging of the electrolyte. Finally, we show that, similar to hydronium, the observed fractional charge of hydroxide is not due to a GGA level self-interaction error, as the partial charge is observed even when using hybrid level exchange–correlation functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗