Roll-to-Roll Integrated Substrates for OLED Lighting (Final Report)
OLED lighting has immense potential as aesthetically pleasing, energy-efficient general illumination. Unlike other light sources, such as incandescents, fluorescents, and inorganic LEDs, OLEDs naturally emit over a large-area surface. They are glare free, do not need to be shaded, and are cool to the touch, requiring no heatsink. The best efficiencies and lifetimes reported are on par with or better than current forms of illumination. However, the cost for OLED lighting remains high – so much so that these products are not market competitive and there is very low consumer demand. We believe that flexible, plastic-based devices will highlight the advantages of aesthetically-pleasing OLED lighting systems while paving the way for lowering both materials and manufacturing costs. These flexible devices require new development in substrate and support technology, which was the focus of the work reported here. Sinovia Technologies, as part of a collaborative team, has developed integrated plastic substrates to serve as supports for flexible OLED lighting. These substrates include a barrier to protect the OLED from moisture and oxygen-related degradation, a smooth, highly conductive transparent anode to define the OLED area, and a light scattering layer to improve emission efficiency. To ensure low cost, the anode pattern must be defined using high throughput, continuous processing, and any pattern shape should be possible. No current patterning technique meets all of these requirements. This SBIR work demonstrated the use of flexographic printing as an effective method of patterning for integrated substrates. Flexography is a letterpress process commonly used for many types of everyday items including boxes, retail bags, milk cartons, food packaging, disposable cups, adhesive tapes, envelopes, wallpaper, and newspaper. The printing process can go as fast as 600 meters per minute with feature resolution around 10 microns, showing promise for low-cost with high throughput. In this case, Sinovia has successfully used this technique to print transparent anode patterns roll-to-roll as part of our integrated substrate for OLED lighting. We have characterized the printed films and tailored the edges of the printed areas for OLED compatibility. We followed this by making white OLEDs using these anodes. To ensure that our anodes were compatible with different OLED stack structures, we fabricated solution-processed polymer white OLEDs, as well as collaborated with OLEDWorks to fabricate evaporated small-molecule devices. Comparing to results from our previous studies, we find that the flexography process does not have any detrimental effects to our overall substrate. We were able to show that our flexographically printed integrated substrate improves OLED efficiency by 24 – 35%, similar to previous results demonstrated using batch-patterning techniques. The success of this work represents two substantial opportunities for OLED lighting manufacturers. The first to first facilitate flexible lighting panels at scale, and the second to lower costs for by enabling roll-to-roll manufacture of the entire device stack. When realized, both of these will help OLED to become market competitive with other forms of general illumination.