Search NASA⌕ Search

Engineering topics

Ge, Jin

Publications and source records attributed to Ge, Jin.

A magnetic‐directed micro‐particle with near‐ IR light triggered guest‐release property

Abstract In this study, guest carriers, composed of magnetic‐directed hydrogel particles with near‐infrared (NIR)‐light‐triggered guest‐release properties, are prepared via the one‐pot method. The gel particles contain photostable NIR‐responsive polypyrrole nanoparticles with temperature‐sensitive poly(N‐isopropyl acrylamide), the combination of which can induce the accelerated release of encapsulated drugs by 337% upon 5 minutes of NIR light irradiation based on the release profile of NRMG‐1 at 10–15 min. Additionally, with magnetic iron oxide particles crosslinking the polyvinyl alcohol frames, these gel particles can form a physical barrier that decreases the release rate by 20% under an external magnetic field over 24 h. The magnetic iron oxide particles also enable the gel particles to reach their target destination without extra drug losses.

60 APPLIED LIFE SCIENCES↗

3D Temperature-Controlled Interchangeable Pattern for Size-Selective Nanoparticle Capture

Patterned surfaces with distinct regularity and structured arrangements have attracted great interest due to their extensive promising applications. Although colloidal patterning has conventionally been used to create such surfaces, herein, we introduce a novel 3D patterned poly(N-isopropylacrylamide) (PNIPAM) surface, synthesized by using a combination of colloidal templating and surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization. In order to investigate the temperature-driven 3D morphological variations at a lower critical solution temperature (LCST) of ~32 °C, multifaceted characterization techniques were employed. Atomic force microscopy confirmed the morphological transformations at 20 and 40 °C, while water contact angle measurements, upon heating, revealed distinct trends, offering insights into the correlation between surface wettability and topography adaptations. Moreover, quartz crystal microbalance with dissipation monitoring and electrochemical measurements were employed to detect the topographical adjustments of the unique hollow capsule structure within the LCST. Tests using different sizes of PSNPs shed light on the size-selective capture–release potential of the patterned PNIPAM, accentuating its biomimetic open–close behavior. Notably, our approach negates the necessity for expensive proteins, harnessing temperature adjustments to facilitate the noninvasive and efficient reversible capture and release of nanostructures. Finally, this advancement hopes to pave the way for future innovative cellular analysis platforms.

36 MATERIALS SCIENCE↗

Synthesis of hyperbranched polymer films via electrodeposition and oxygen-tolerant surface-initiated photoinduced polymerization

Hypothesis Hyperbranched polymers, not only possess higher functionality, but are also easier to prepare compared to dendrimers and dendric polymers. Combining electrodeposition and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization is hypothesized to be a novel strategy for preparing hyperbranched polymer films on conductive surfaces without degassing. Experiments In this study, polymer brush grafted films with four different architectures (i.e. linear, branched, linear- block -branched, and branched- block -linear) were prepared on gold-coated glass substrates using electrodeposition, followed by SI-PET-RAFT polymerization. The resulting film structure and thickness, surface topology, absorption property, and electrochemical behavior were confirmed by spectroscopy, microscopy, microbalance technique, and impedance measurement. Findings These hyperbranched polymer brushes were capable of forming a thicker but more uniformly covered films compared to linear polymer brush films, demonstrating that hyperbranched polymer films can be potentially useful for fabricating protective polymer coatings on various conductive surfaces.

36 MATERIALS SCIENCE↗

Hyperbranched PDMAEMA-functionalized SiO 2 microparticles: ATRP polymerization and grafting in a continuous flow reactor

Flow chemistry offers high reaction yield, kinetic control, improved safety, reliability, scalability, and greater degree of process control. Herein, hyperbranched polymer-grafted silica microparticles (HP-SMPs) are synthesized in a commercially available flow reactor through atom transfer radical polymerization. Initiator-anchored silica microparticles are obtained by in situ silanization in the flow reactor. Hyperbranched poly[2-(dimethylamino)ethylmethacrylate] chains are grafted onto the initiator-anchored SMPs through inimer–monomer ratio control. To demonstrate the efficiency and universality of this approach in grafting polymers onto SMPs, multiple hyperbranched polymeric structures are obtained by varying the inimer concentration. Dye absorption test is conducted to demonstrate the potential applications of HP-SMPs.

36 MATERIALS SCIENCE↗

SI-PET-RAFT Polymerization via Electrodeposited Macroinitiator Thin Films: Toward Biomedical and Sensing Applications

Surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization has been preferentially used for preparing thin polymeric film coatings due to its simple execution under ambient conditions (e.g., in air) and visible light requirement. In this study, we demonstrate the preparation of polymer brushes by SI-PET-RAFT polymerization on a thin macroinitiator film electrodeposited on electrically conductive indium tin oxide and gold surfaces. An electrochemically active carbazole-containing chain transfer agent as macroinitiator was shown to be not only effective in mediating SI-PET-RAFT polymerization for various monomers but also capable of forming block copolymers. Additionally, the fabricated polymer brush films were able to encapsulate colloidal gold nanoparticles, thereby demonstrating potential use for biomedical and sensing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Interfacial Behavior of Catenated Poly(l-lactide) at the Air–Water Interface

Interfacial properties of polymeric materials are significantly influenced by their architectural structures and spatial features, while such a study of topologically interesting macromolecules is rarely reported. Here, we reported, for the first time, the interfacial behavior of catenated poly(l-lactide) (C-PLA) at the air–water interface and compared it with its linear analogue (L-PLA). The isotherms of surface pressure–area per repeating unit showed significant interfacial behavioral differences between the two polymers with different topologies. Isobaric creep experiments and compression–expansion cycles also showed that C-PLA demonstrated higher stability at the air–water interface. Interestingly, when the films at different surface pressures were transferred via the Langmuir–Blodgett method, successive atomic force microscopy imaging displayed distinct nanomorphologies, in which the surface of C-PLA exhibited nanofibrous structures, while that of the L-PLA revealed a smoother topology with less fiber-like structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Efficient Rechargeable Aluminium–Amine Battery Working Under Quaternization Chemistry

Rechargeable aluminium (Al) batteries (RABs) have long-been pursued due to the high sustainability and three-electron-transfer properties of Al metal. However, limited redox chemistry is available for rechargeable Al batteries, which restricts the exploration of cathode materials. Herein, we demonstrate an efficient Al–amine battery based on a quaternization reaction, in which nitrogen (radical) cations (R 3 N .+ or R 4 N + ) are formed to store the anionic Al complex. The reactive aromatic amine molecules further oligomerize during cycling, inhibiting amine dissolution into the electrolyte. Consequently, the constructed Al–amine battery exhibits a high reversible capacity of 135 mAh g -1 along with a superior cycling life (4000 cycles), fast charge capability and a high energy efficiency of 94.2 %. Moreover, the Al–amine battery shows excellent stability against self-discharge, far beyond conventional Al–graphite batteries. Our findings pave an avenue to advance the chemistry of RABs and thus battery performance.

25 ENERGY STORAGE↗

Synthesis of Hyperbranched Polymers via PET-RAFT Self-Condensing Vinyl Polymerization in a Flow Reactor

Photoinduced polymerization techniques have been used in preparing various polymeric materials as they share several advantages with thermally-triggered processes using mild conditions, low catalyst concentrations, and easy-to-perform experimental conditions. By combining photoinduced eletrotransfer reversible addition–fragmentation chain transfer (RAFT) polymerization with self-condensing vinyl polymerization (SCVP), in this work, a series of hyperbranched polymers is prepared in a flow reactor. Considered to be an alternative powerful method in improving scalability, reliability, and efficiency, the use of a flow reactor allowed us to synthesize hyperbranched poly(poly(ethylene glycol methyl ether)acrylate) (PPEGMEA) under extremely mild conditions–room temperature, open vessel, and use of LED light and water/methanol mixed solutions. Finally, the method also demonstrates considerable controllability in molecular weight and branching density by adjusting the feeding ratio of monomer to transmer, leading to the synthesis of block copolymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mussel-Inspired Hydrogel Composite with Multi-Stimuli Responsive Behavior

A mussel-inspired adhesive hydrogel with pH, temperature, and near-infrared (NIR) light–responsive behavior is designed here. The hydrogel system is formulated by combining chitosan modified with catechol motifs, thermo-responsive poly(N-isopropylacrylamide) terminated with catechols, and light-absorbing polypyrrole nanoparticles (PpyNPs). The effects of catechol concentration, molar ratio of Fe 3+ to catechol units, pH, and the incorporation of the PpyNPs on the mechanical property of the formed hydrogel are investigated. The responsive behaviors of the resulting hydrogel composite to pH, temperature, and NIR light are also demonstrated. The obtained hydrogel also shows promising adhesive property to glass and steel substrates. It is anticipated that the fabricated adhesive hydrogel with multi-responsive behavior, especially NIR light response, can potentially be useful in a wide range of biomedical applications, such as remotely controlled release systems and removable sealant materials.

42 ENGINEERING↗

Wnt3a suppresses Wnt/β-catenin signaling and cancer cell proliferation following serum deprivation

Canonical Wnt/β-catenin signaling is often aberrantly activated in tumor cells and required for tumor growth. The internalization of Wnt co-receptor low-density lipoprotein receptor-related protein 6 (LRP6) induced by Wnt ligands is commonly thought to be critical for Wnt/β-catenin signaling activation. However, in contrast to theses previous studies, we here show that persistent excessive stimulation with a canonical Wnt ligand Wnt3a could induce a long-term decreased expression level of membrane LRP6, which prevented nuclear β-catenin accumulation and tumor cell;proliferation. Importantly, Wnt3a was robustly upregulated following serum deprivation. The upregulated Wnt3a under serum deprivation was responsible for LRP6 internalization, decreased accumulation of nuclear β-catenin, and further inhibition of tumor cell proliferation. It has well been known that insufficient blood supply during tumor development occurs frequently, causing a worsening environment for tumor growth. Therefore, these results reveal a novel inhibitory role of Wnt3a on canonical Wnt/β-catenin signaling and cancer cell proliferation when there is an insufficient blood supply during tumor development, which might be a potential mechanism for tumor evasion within a worsening environment. - Highlights: • Wnt3a has a novel inhibitory role on Wnt/β-catenin signaling in cancer cells. • Persistent excessive Wnt3a stimulation suppressed β-catenin and cell proliferation. • Inhibitory effects of Wnt3a were mediated by LRP6 endocytosis. • Inhibitory effects of Wnt3a were abolished by Nystatin or FilipinIII. • Serum deprivation suppressed cell proliferation via elevating Wnt3a expression.

60 APPLIED LIFE SCIENCES↗

THE FIRST HYPERVELOCITY STAR FROM THE LAMOST SURVEY

We report the first hypervelocity star (HVS) discovered from the LAMOST spectroscopic survey. It is a B-type star with a heliocentric radial velocity of about 620 km s{sup –1}, which projects to a Galactocentric radial velocity component of ∼477 km s{sup –1}. With a heliocentric distance of ∼13 kpc and an apparent magnitude of ∼13 mag, it is the closest bright HVS currently known. With a mass of ∼9 M {sub ☉}, it is one of the three most massive HVSs discovered so far. The star is clustered on the sky with many other known HVSs, and its position suggests a possible connection to Galactic center structures. With the current poorly determined proper motion, a Galactic center origin of this HVS remains consistent with the data at the 1σ level, while a disk runaway origin cannot be excluded. We discuss the potential of the LAMOST survey to discover a large statistical sample of HVSs of different types.

79 ASTRONOMY AND ASTROPHYSICS↗

DA WHITE DWARFS OBSERVED IN THE LAMOST PILOT SURVEY

A total of {approx}640, 000 objects from the LAMOST pilot survey have been publicly released. In this work, we present a catalog of DA white dwarfs (DAWDs) from the entire pilot survey. We outline a new algorithm for the selection of white dwarfs (WDs) by fitting Sersic profiles to the Balmer H{beta}, H{gamma}, and H{delta} lines of the spectra, and calculating the equivalent width of the Ca II K line. Two thousand nine hundred sixty-four candidates are selected by constraining the fitting parameters and the equivalent width of the Ca II K line. All the spectra of candidates are visually inspected. We identify 230 DAWDs (59 of which are already included in the Villanova and SDSS WD catalogs), 20 of which are DAWDs with non-degenerate companions. In addition, 128 candidates are classified as DAWDs/subdwarfs, which means the classifications are ambiguous. The result is consistent with the expected DAWD number estimated based on the LEGUE target selection algorithm.

79 ASTRONOMY AND ASTROPHYSICS↗

Fully integrated InGaAs/InP single-photon detector module with gigahertz sine wave gating

InGaAs/InP single-photon avalanche diodes (SPADs) working in the regime of GHz clock rates are crucial components for the high-speed quantum key distribution (QKD). We have developed for the first time a compact, stable, and user-friendly tabletop InGaAs/InP single-photon detector system operating at a 1.25 GHz gate rate that fully integrates functions for controlling and optimizing SPAD performance. We characterize the key parameters of the detector system and test the long-term stability of the system for continuous operation of 75 h. The detector system can substantially enhance QKD performance and our present work paves the way for practical high-speed QKD applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗