Search NASA⌕ Search

Engineering topics

Gehan, Timothy S.

Publications and source records attributed to Gehan, Timothy S..

The Molybdenum Oxide Interface Limits the High-Temperature Operational Stability of Unencapsulated Perovskite Solar Cells

Here, we report on the improved operational stability of unencapsulated perovskite solar cells (PSCs) aged in an ambient atmosphere at elevated temperatures (70 °C) for >1000 h under constant illumination and bias at 30–50% relative humidity. We identify a previously unseen interfacial degradation mechanism concerning the use of a MoO x interlayer, which was originally added to increase operational stability. Specifically, the hole-transport layer/MoO x interface buckles under illumination at 70 °C, which leads to delamination and rapid losses of short-circuit current density corresponding to an average $t_{80}$ of ~55 h. By judiciously evaluating various hole-transport layers, interlayers, and contacts, we find that replacing the MoO x with a VO x interlayer, regardless of the other components in the solar cell, alleviates this buckling issue due to its higher activation barrier toward crystallization, leading to significant gains in PSC operational stability. Unencapsulated devices aged in an ambient atmosphere with a VO x interlayer retain 71% of their initial PCE on average after constant illumination and bias at 70 °C for 1100 h ($t_{80}$ ~ 645 h). Currently, this is the highest temperature reported for the operational stability of unencapsulated n-i-p PSCs aged in air. Identification of a new facet of the complex degradation mechanisms in PSCs will allow for targeted acceleration testing to speed the deployment of low-cost, long-lasting electricity generation under realistic operating temperatures.

14 SOLAR ENERGY↗

Thermally Stable Perovskite Solar Cells by Systematic Molecular Design of the Hole-Transport Layer

With the burgeoning performance of metal halide perovskite solar cells (PSC), one of the biggest challenges to date is addressing device stability. Within the PSC device stack, charge-selective contact selection has been shown to considerably impact PSC stability. Recently, a triarylamine-based hole-transport layer (HTL) doped with its oxidized organic salt analogue (EH44/EH44-ox) has been shown to bypass the need for hygroscopic lithium salt dopants, enabling high PSC stability in ambient conditions. Despite these promising results, the improved stability came with a power conversion efficiency (PCE) penalty and poor performance above 30 degrees C. Broadening the applicability and understanding of this under-utilized dopant system, we report design criteria for stable, synthetically simple triarylamine-based organic hole transport materials (HTM) and their corresponding oxidized salts as HTL dopants for improved PSC efficiency and stability at elevated temperature. The triarylamine-based dopants must contain at least two para-electron donating groups for radical cation stabilization to prevent impurity formation (e.g., dopant reduction) which significantly reduces PSC fill factors (FF) and PCE. To further improve PSC FF and PCE, these dopants can be interchanged with respect to the HTL matrix. The stability of unencapsulated devices prepared with these three new HTLs, under constant load and illumination, considerably outperform both EH44/EH44-ox and Li+-doped spiro-OMeTAD controls at 50 degrees C. The ability to mix and match a stable dopant with a non-identical small-molecule-based HTL matrix for improved charge-transport properties broadens design scope for highly stable and cost-effective PSC without sacrificing performance.

14 SOLAR ENERGY↗

Tunable Percolation in Semiconducting Binary Polymer Nanoparticle Glasses

Binary polymer nanoparticle glasses offer opportunities to realize the facile assembly of disparate components, with control over nanoscale and mesoscale domains, for the development of functional materials. Our report demonstrates that tunable electrical percolation can be achieved through semiconducting/insulating polymer nanoparticle glasses by varying the relative percentages of equal-sized nanoparticle constituents of the binary assembly. Using time-of-flight charge carrier mobility measurements and conducting atomic force microscopy, we show that these systems exhibit power law scaling percolation behavior with percolation thresholds of ~24–30%. We develop a simple resistor network model, which can reproduce the experimental data, and can be used to predict percolation trends in binary polymer nanoparticle glasses. Finally, we analyze the cluster statistics of simulated binary nanoparticle glasses, and characterize them according to their predominant local motifs as (p i , p 1-i )-connected networks that can be used as a supramolecular toolbox for rational material design based on polymer nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer Nanoparticle Assemblies: A Versatile Route to Functional Mesostructures

Fabricating macromolecular mesoscale assemblies containing disparate components with targeted molecular order for each of the components on the nanoscale and targeted assembly of the components in the mesoscale is a challenge. In this Perspective, we explore the self-assembly of polymer nanoparticles as a viable route to obtain tunable mesostructured materials. Here, we describe the state-of-the-art methods available for and the challenges to obtain spherical and nonspherical polymer nanoparticles. We discuss the predicted ordered assemblies and disordered assemblies of nanoparticles and the challenges to obtain these assemblies in polymer nanoparticles. We also comment on the rich and future opportunities in the burgeoning field of polymer nanoparticle assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗