Search NASA⌕ Search

Engineering topics

Gehin, Jess C

Publications and source records attributed to Gehin, Jess C.

At least 19 records

Assessment of Nuclear Data Needs for Advanced Reactor Demonstrations: Application to the Molten Chloride Reactor Experiment (MCRE)

A number of advanced reactor concepts are planned for near-term demonstrations including microreactors, larger demonstrations and space nuclear systems. These reactor concepts are based on a wide variety of reactor technologies, including sodium, gas, and salt cooling. An overlooked area in the development and ultimate startup of these reactors is addressing nuclear data needs that allow confident prediction of the criticality, safety requirements, and operation of the reactors. In this paper we try to address the problem of assessing nuclear data needs and possible remedies to reduce the existing uncertainties for advanced nuclear reactors. A methodology for defining these needs is described. The case of the Molten Chloride Reactor Experiment (MCRE) has been considered and the related investigation highlights the specific needs for reducing uncertainty on the 235U capture and 35Cl (n,p) reactions. Integral experiments relatively inexpensive are indicated as possible solution for significantly reduce the current associated uncertainties.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE Microreactor Program: Summary of Experimental Capabilities Development and Activities

This document provides a summary of the experimental capabilities and activities developed and currently performed under the U.S. Department of Energy’s (DOE’s) Microreactor Program. These capabilities, along with other laboratory capabilities, are available to support developer and other stakeholder needs. Specific experimental capabilities described in this document include the single primary heat extraction and removal emulator (SPHERE), the microreactor agile non-nuclear experimental test bed (MAGNET), microreactor applications research validation and evaluation (MARVEL), yttrium hydride fabrication, the Hypatia critical experiment series, and a brief overview of the National Criticality Experiments Research Center (NCERC), which provides the platform to conduct experiments and training with critical assemblies and fissionable material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fission Battery Initiative: Research and Development Plan

The Fission Battery Initiative has been established by the Idaho National Laboratory’s (INL’s) Nuclear Science and Technology Directorate [6] to define, focus, and coordinate research and development (R&D) of technologies that can fully achieve battery-like functionality for nuclear energy systems. The notion of a “fission battery” conveys a vision focused on realizing very simple “plug-and-play” nuclear systems that can be integrated into a variety of applications requiring affordable, reliable energy in the form of electricity and/or heat and function without operations and maintenance staff. In order to formalize the desired functionality, the initiative has adopted the following key attributes to be achieved: economic, standardized, installed, unattended and reliable

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fission Batteries: Definition, Key Attributes and Research and Development Needs

The term battery was first introduced by the American scientist and inventor Benjamin Franklin in 1749, followed by invention of the first true battery in 1800 by Alessandro Volta. Today, batteries are a ubiquitous source of portable electric power across different applications. Batteries are widely used across a range of scales from consumer products to grid-scale energy storage. There are different types of batteries, but they can be broadly classified as chemical or electric batteries [1], atomic batteries, nuclear batteries, tritium batteries or radioisotope generators [2, 3]. Atomic batteries, nuclear batteries, tritium batteries, and radioisotope generators have gained significant attention for applications requi-ing long-term power supply and high-power density, including the space power reactor [4]. While a number of reactor systems, particularly micro-reactors, are referred to as fission batteries, this paper defines key attributes required for a fission reactor to achieve capabilities comparable with the characteristics of batteries that enable their wide-spread use. Achieving this full vision of a fission battery will enable broad deployment of fission reactors that function like batteries. The research and development (R&D) activities needed to achieve the desired fission battery attributes are discussed below.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

VERA Benchmarking Results for Watts Bar Nuclear Plant Unit 1 Cycles 1-12

The Consortium for Advanced Simulation of Light Water Reactors, the first US DOE Energy Innovation Hub, is developing and deploying a suite of directly coupled, high-fidelity physics methods known as VERA for performing engineering analyses of operating commercial nuclear power reactors. The centerpiece of VERA is the reactor core simulator, which employs the direct coupling of a 3D neutron transport code, a two-phase sub-channel thermal-hydraulic code, and a well-known isotopic depletion and decay code. Together these tools represent the most rigorous reactor simulator available today. Recently added capabilities include the depletion, shuffling, and discharge of fuel assemblies, enabling VERA to simulate multiple fuel cycles of operation. To demonstrate this capability, VERA has been used to simulate over 18 years of operation of TVA’s Watts Bar Nuclear Unit 1, and the results of these calculations have been used to quantify its performance in an industry-grade benchmarking activity. Comparisons are made with measured critical boron concentrations, control bank reactivity worths, isothermal temperature coefficients, and in-core neutron flux distributions. These results demonstrate that the advanced tools in VERA are capable for application to practical and common industrial problems.

Godfrey, Andrew T↗

VERA Core Simulator Methodology for PWR Cycle Depletion

This paper describes the methodology developed and implemented in MPACT for performing high-fidelity pressurized water reactor (PWR) multi-cycle core physics calculations. MPACT is being developed primarily for application within the Consortium for the Advanced Simulation of Light Water Reactors (CASL) as one of the main components of the VERA Core Simulator, the others being COBRA-TF and ORIGEN. The methods summarized in this paper include a methodology for performing resonance self-shielding and computing macroscopic cross sections, 2-D/1-D transport, nuclide depletion, thermal-hydraulic feedback, and other supporting methods. These methods represent a minimal set needed to simulate high-fidelity models of a realistic nuclear reactor. Results demonstrating this are presented from the simulation of a realistic model of the first cycle of Watts Bar Unit 1. The simulation, which approximates the cycle operation, is observed to be within 50 ppm boron (ppmB) reactivity for all simulated points in the cycle and approximately 15 ppmB for a consistent statepoint. The verification and validation of the PWR cycle depletion capability in MPACT is the focus of two companion papers.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Approach for Assessing Development and Deployment Risks in the DOE Fuel Cycle Options Evaluation and Screening Study

Abstract One of the key objectives of the U.S. Department of Energy (DOE) Nuclear Energy R&D Roadmap is the development of sustainable nuclear fuel cycles that can improve natural resource utilization and provide solutions to the management of nuclear wastes. Recently, an evaluation and screening (E&S) of fuel cycle systems has been conducted to identify those options that provide the best opportunities for obtaining such improvements and also to identify the required research and development activities that can support the development of advanced fuel cycle options. In order to evaluate and screen the E&S study included nine criteria including Development and Deployment Risk (D&DR). More specifically, this criterion was represented by the following metrics: Development time, development cost, deployment cost from prototypic validation to first-of-a-kind commercial, compatibility with the existing infrastructure, existence of regulations for the fuel cycle and familiarity with licensing, and existence of market incentives and/or barriers to commercial implementation of fuel cycle processes. Given the comprehensive nature of the study, a systematic approach was needed to determine metric data for the D&DR criterion, and is presented here. As would be expected, the Evaluation Group representing the once-through use of uranium in thermal reactors is always the highest ranked fuel cycle Evaluation Group for this D&DR criterion. Evaluation Groups that consist of once-through fuel cycles that use existing reactor types are consistently ranked very high. The highest ranked limited and continuous recycle fuel cycle Evaluation Groups are those that recycle Pu in thermal reactors. The lowest ranked fuel cycles are predominately continuous recycle single stage and multi-stage fuel cycles that involve TRU and/or U-233 recycle.

Gehin, Jess C↗

An Investigation of the Use of Fully Ceramic Microencapsulated Fuel for Transuranic Waste Recycling in Pressurized Water Reactors

An investigation of the utilization of TRistructural- ISOtropic (TRISO)-coated fuel particles for the burning of plutonium/neptunium (Pu/Np) isotopes in typical Westinghouse four-loop pressurized water reactors is presented. Though numerous studies have evaluated the burning of transuranic isotopes in light water reactors (LWRs), this work differentiates itself by employing Pu/Np-loaded TRISO particles embedded within a silicon carbide (SiC) matrix and formed into pellets, constituting the fully ceramic microencapsulated (FCM) fuel concept that can be loaded into standard LWR fuel element cladding. This approach provides the capability of Pu/Np burning and, by virtue of the multibarrier TRISO particle design and SiC matrix properties, will allow for greater burnup of Pu/Np material, plus improved fuel reliability and thermal performance. In this study, a variety of heterogeneous assembly layouts, which utilize a mix of FCM rods and typical UO2 rods, and core loading patterns were analyzed to demonstrate the neutronic feasibility of Pu/Np-loaded TRISO fuel. The assembly and core designs herein reported are not fully optimized and require fine-tuning to flatten power peaks; however, the progress achieved thus far strongly supports the conclusion that with further rod/assembly/core loading and placement optimization, Pu/Np-loaded TRISO fuel and core designs that are capable of balancing Pu/Np production and destruction can be designed within the standard constraints for thermal and reactivity performance in pressurized water reactors.

Gentry, Cole A↗

Watts Bar Unit 1 Cycle Zero Power Physics Tests Analysis with VERA-CS

The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications, including a core simulation capability called VERA-CS. A key milestone for this endeavor is to validate VERA against measurements from operating nuclear power reactors. The first step in validation against plant data is to determine the ability of VERA to accurately simulate the initial startup physics tests for Watts Bar Nuclear Power Station, Unit 1 (WBN1) cycle 1. VERA-CS calculations were performed with the Insilico code developed at ORNL using cross section processing from the SCALE system and the transport capabilities within the Denovo transport code using the SPN method. The calculations were performed with ENDF/B-VII.0 cross sections in 252 groups (collapsed to 23 groups for the 3D transport solution). The key results of the comparison of calculations with measurements include initial criticality, control rod worth critical configurations, control rod worth, differential boron worth, and isothermal temperature reactivity coefficient (ITC). The VERA results for these parameters show good agreement with measurements, with the exception of the ITC, which requires additional investigation. Results are also compared to those obtained with Monte Carlo methods and a current industry core simulator.

CASL↗

SmAHTR-CTC Neutronic Design

Building on prior experience for the 2010 initial SmAHTR neutronic design and on 2012 neutronic design for the advanced high temperature reactor (AHTR), this paper presents the main results of the neutronic design effort for the newly re-purposed SmAHTR-CTC reactor concept. The results are obtained based on full-core simulations performed with SCALE6.1. The dimensionality of the SmAHTR design space is reduced by using constraints originating in material fabricability, fuel licensing, molten salt chemistry, thermal-hydraulic and mechanical considerations. The new design represents in many regards a substantial improvement from the neutronic performance standpoint over the 2010 SmAHTR concept. Among other results, it is shown that fuel cycle length of over 2 years or discharged fuel burnup of 40GWd/MTHM are possible with a low, 8% fuel enrichment in a once-through fuel cycle, while 8-year once-through fuel cycle lengths are possible at higher fuel enrichments.

Ilas, Dan↗