Engineering topics

Geiger, B. (ORCID:0000000187061874)

Publications and source records attributed to Geiger, B. (ORCID:0000000187061874).

8 records

DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗

DOE OSTI2024

Measurement of Stark-split beam and carbon charge exchange emissions for simultaneous B-field and temperature/rotation analysis at DIII-D

A set of two newly designed, single-channel Czerny–Turner spectrometers has been deployed at the DIII-D tokamak for measurements of the motional Stark effect (MSE) split beam emission and the C6+ (CVI) carbon charge exchange recombination (CER) emission at high spectral (δλ = 0.13 nm) and temporal (1–5 kHz) resolution. High throughput optics (f/# = 2.8) allow for good signal-to-noise at high time resolution using fast EMCCD detectors. The MSE emission allows for spectral fitting of the magnitude and direction of the local B-field, while the carbon emission yields local ion temperature and toroidal rotation information. To reduce so-called Doppler broadening of the MSE emission, a new channel-specific variable lens-masking approach has been developed. Experimental data collected from the 2023 DIII-D experimental campaign demonstrate the signal quality and instrument fidelity for both diagnostic measurements. Moreover, initial CER data analysis shows a clear evolution of the toroidal rotation during edge localized modes. Initial progress on the advanced MSE model, including a new validated ray-trace model of the DIII-D collection optics, is shown via sensitivity analysis.

Instruments & Instrumentation↗

DOE OSTI2024

Enhancing Thomson scattering polychromator performance with multi-pass spectral filters

In photon-deficient, noncollective Thomson scattering diagnostics, filter polychromators are typically employed in the spectral analysis of Thomson-scattered signals to achieve acceptable signal-to-noise performance. Currently, the most common polychromator filter configuration employs a set of single-passband optical filters that define individual spectral channels. Here, we introduce a new spectral analysis method for Thomson scattering based on spectral filters with multiple passbands, referred to as Thomson scattering spectral multiplexing. Implementing multi-bandpass spectral filters on polychromators increases the achievable range of electron temperature measurement for a given number of filters employed. In addition, Thomson scattering spectral multiplexing reduces systematic measurement uncertainty, with fewer required spectral channels, thereby decreasing light loss from reduced optical element interactions. A multi-bandpass filter set, optimized by a genetic algorithm, has been successfully installed and tested on the Helically Symmetric eXperiment (HSX), demonstrating the benefits of the Thomson scattering spectral multiplexing method.

Instruments & Instrumentation↗

DOE OSTI2024

Real-time confinement regime detection in fusion plasmas with convolutional neural networks and high-bandwidth edge fluctuation measurements

Abstract A real-time detection of the plasma confinement regime can enable new advanced plasma control capabilities for both the access to and sustainment of enhanced confinement regimes in fusion devices. For example, a real-time indication of the confinement regime can facilitate transition to the high-performing wide-pedestal (WP) quiescent H-mode, or avoid unwanted transitions to lower confinement regimes that may induce plasma termination. To demonstrate real-time confinement regime detection, we use the 2D beam emission spectroscopy (BES) diagnostic system to capture localized density fluctuations of long wavelength turbulent modes in the edge region at a 1 MHz sampling rate. BES data from 330 discharges in either L-mode, H-mode, quiescent H (QH)-mode, or WP QH-mode were collected from the DIII-D tokamak and curated to develop a high-quality database to train a deep-learning classification model for real-time confinement detection. We utilize the 6×8 spatial configuration with a time window of 1024 µ s and recast the input to obtain spectral-like features via fast Fourier transform preprocessing. We employ a shallow 3D convolutional neural network for the multivariate time-series classification task and utilize a softmax in the final dense layer to retrieve a probability distribution over the different confinement regimes. Our model classifies the global confinement state on 44 unseen test discharges with an average F 1 score of 0.94, using only ∼1 ms snippets of BES data at a time. This activity demonstrates the feasibility for real-time data analysis of fluctuation diagnostics in future devices such as ITER, where the need for reliable and advanced plasma control is urgent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Tokamak edge localized mode onset prediction with deep neural network and pedestal turbulence

Abstract A neural network, BES-ELMnet, predicting a quasi-periodic disruptive eruption of the plasma energy and particles known as edge localized mode (ELM) onset is developed with observed pedestal turbulence from the beam emission spectroscopy system in DIII-D. BES-ELMnet has convolutional and fully-connected layers, taking two-dimensional plasma fluctuations with a temporal window of size 128 µ s and generating a scalar output which can be interpreted as a probability of the upcoming ELM onset. As approximately labeled inter-ELM broadband ( 15 kHz ⩽ f ⩽ 150 kHz ) fluctuations are given to the network, BES-ELMnet learns by itself ELM-related precursors arising before the onsets through supervised learning scheme. BES-ELMnet achieves the gradually increasing ELM onset probabilities between two consecutive ELMs during the inter-ELM phases and can forecast the first ELM onsets which occur after the high confinement mode transition. We further investigate the network generality in terms of the selected frequency band to ensure the use of BES-ELMnet for various operation regimes without changing the trained architecture. Therefore, our novel prediction method will enhance a proactive high confinement mode control of fusion-grade plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

On the effect of flux-surface shaping on trapped-electron modes in quasi-helically symmetric stellarators

Using a novel optimization procedure, it has been shown that the Helically Symmetric eXperiment stellarator can be optimized for reduced trapped-electron-mode (TEM) instability [Gerard et al., Nucl. Fusion 63, (2023) 056004]. Presently, with a set of 563 experimental candidate configurations, gyrokinetic simulations are performed to investigate the efficacy of available energy EA, quasi-helical symmetry, and flux-surface shaping parameters as metrics for TEM stabilization. It is found that lower values of EA correlate with reduced growth rates, but only when separate flux-surface shaping regimes are considered. Moreover, configurations with improved quasi-helical symmetry demonstrate a similar reduction in growth rates and less scatter compared to EA. Regarding flux-surface shaping, a set of helical shaping parameters is introduced that show increased elongation is strongly correlated with reduced TEM growth rates, however, only when the quasi-helical symmetry is preserved. Using a newly derived velocity-space-averaged TEM resonance operator, these trends are analyzed to provide insights into the physical mechanism of the observed stabilization. For elongation, stabilization is attributed to geometric effects that reduce the destabilizing particle drifts across the magnetic field. Regarding quasi-helical symmetry, the TEM resonance in the maximally resonant trapping well is shown to increase as the quasi-helical symmetry is broken, and breaking quasi-helical symmetry increases the prevalence of highly resonant trapping wells. While these results demonstrate the limitations of using any single metric as a linear TEM proxy, it is shown that quasi-helical symmetry and plasma elongation are highly effective metrics for reducing TEM growth rates in helical equilibria.

Physics↗

DOE OSTI2023

Physics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)

The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedal et al. ( Nucl. Fusion , vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Optimizing the HSX stellarator for microinstability by coil-current adjustments

Abstract The optimization of helically symmetric experiment (HSX) for reduced microinstability has been achieved by examining a large set of configurations within a neighborhood of the standard operating configuration. This entailed generating a database of more than 10 6 magnetic-field configurations for HSX by varying the currents in external coils. Using a set of volume-averaged metrics and gyrokinetic simulations, this database has helped to identify a set of configurations that can be used to regulate trapped-electron-mode stability in HSX. This set of configurations is also found to correlate flux-surface elongation and triangularity with an increase in magnetic-well depth, an increase in rotational transform, and low neoclassical heat-flux relative to the standard quasi-helically-symmetric configuration. These results demonstrate sensitivity of plasma behavior in response to changes in a 3D magnetic field to both neoclassical and gyrokinetic models, and the experimental potential in HSX to explore turbulence optimization. This perturbative optimization approach is not unique to HSX, and can readily be deployed on existing fusion devices to identify novel magnetic-fields to be used in turbulence-optimization experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗