Engineering topics
Geissel, Matthias
Publications and source records attributed to Geissel, Matthias.
Uncovering signatures of preheat performance in MagLIF experiments using stimulated Raman and Brillouin backscatter spectra.
Abstract not provided.
Upgrades to the Z-Petawatt Laser at Sandia National Laboratories.
Abstract not provided.
Assessing stagnation magnetized liner inertial fusion stagnation conditions and identifying trends.
Abstract not provided.
Minimizing scatter-losses during pre-heat for magneto-inertial fusion targets
Here, the size, temporal and spatial shape, and energy content of a laser pulse for the pre-heat phase of magneto-inertial fusion affect the ability to penetrate the window of the laser-entrance-hole and to heat the fuel behind it. High laser intensities and dense targets are subject to laser-plasma-instabilities (LPI), which can lead to an effective loss of pre-heat energy or to pronounced heating of areas that should stay unexposed. While this problem has been the subject of many studies over the last decades, the investigated parameters were typically geared towards traditional laser driven Inertial Confinement Fusion (ICF) with densities either at 10% and above or at 1% and below the laser's critical density, electron temperatures of 3–5 keV, and laser powers near (or in excess of) 1 × 10 15 W/cm 2 . In contrast, Magnetized Liner Inertial Fusion (MagLIF) currently operates at 5% of the laser's critical density using much thicker windows (1.5–3.5 μm) than the sub-micron thick windows of traditional ICF hohlraum targets. This article describes the Pecos target area at Sandia National Laboratories using the Z-Beamlet Laser Facility as a platform to study laser induced pre-heat for magneto-inertial fusion targets, and the related progress for Sandia's MagLIF program. Forward and backward scattered light were measured and minimized at larger spatial scales with lower densities, temperatures, and powers compared to LPI studies available in literature.
Pre-Heat Optimization for Magnetized Liner Inertial Fusion at Sandia.
Abstract not provided.
Study of fuel preheating dependence on laser wavelength and intensity for MagLIF.
Abstract not provided.
MagLIF Pre-Heat Optimization on the PECOS Surrogacy Platform.
Abstract not provided.
Adding a long-pulse mode option to Z-Petawatt for improved MagLIF performance.
Abstract not provided.
A Path to Increased Performance in Magnetized Liner Inertial Fusion.
Abstract not provided.
Diagnosing the Stagnation Conditions of MagLIF Implosions Using Co and Kr dopants.
Abstract not provided.
Magnetized Liner Inertial Fusion at Sandia: Time-Resolved Backscatter Spectra of the Pre-Heat Laser.
Abstract not provided.
Challenges associated with laser preheat and LPI in MagLIF.
Abstract not provided.
Pre-Heat Optimization for Magnetized Liner Inertial Fusion at Sandia.
Abstract not provided.
Progress in Preconditioning MagLIF fuel and its Impact on Performance.
Abstract not provided.