Control of Misfit Dislocation Glide Plane Distribution during Strain Relaxation of CuPt-Ordered GaInAs and GaInP
Abstract not provided
Engineering topics
Publications and source records attributed to Geisz, J F.
Abstract not provided
To examine the limitations of one-dimensional (1D) solar cell modeling, 3D SPICE-based modeling is used to examine in detail the validity of the 1D assumptions as a function of sheet resistance for a model cell. The internal voltages and current densities produced by this modeling give additional insight into the differences between the 1D and 3D models.
Abstract not provided
The inverted metamorphic multijunction (IMM) solar cell has demonstrated efficiencies as high as 40.8% at 25 degrees C and 326 suns concentration. The actual operating temperature in a commercial module, however, is likely to be as much as 50-70 degrees C hotter, reaching as high as 100 degrees C. In order to be able to evaluate the cell performance under these real-world operating conditions, wehave measured the open-circuit voltage, short-circuit current density and efficiency at temperatures up to 125 degrees C and concentrations up to 1000 suns, as well as the temperature coefficients of these parameters. Spectral response and one-sun current-voltage characteristics were measured by carefully adjusting the incident spectrum to selectively current-limit the different subcells.Concentrator measurements were taken on a pulsed solar simulator to minimize any additional heating due to the high intensity illumination. We compare our measured values to predictions based on detailed models of various triple junction solar cells. By choosing the optimum bandgaps for high temperature operation, the IMM can potentially result in greater energy production and lower temperaturesensitivity under real operating conditions than a Ge-based solar cell.
Photoluminescence (PL) spectra of bound excitons were measured in uniaxially strained GaP by performing shock-wave experiments at liquid nitrogen temperatures. GaP samples doped with sulfur or nitrogen were compressed up to 3 GPa when subjected to uniaxial strains along the [100] crystallographic orientation. PL lines from shallow sulfur donors redshifted upon compression, tracking the reduction in the indirect band gap. PL lines related to the isoelectronic NN1 pairs, in contrast, exhibited splitting and nonlinear blueshift. An empirical approach was used to model the NN1 behavior. It was shown that the splitting pattern is consistent with the previously proposed symmetry of NN1 defects and nonlinearities resulting from the reduction in the exciton binding energy. At high stresses, the NN1 lines disappeared due to the ionization of bound excitons.
We have fabricated a series of GaxIn1-xP samples over the compositional range 0.51<x<0.76 on GaAs substrates. The samples were prepared by first growing a thick step-graded layer of GaAs1-yPy to bridge the lattice misfit between the GaxIn1-xP layers and the GaAs substrate. The order parameter was tuned using a dilute antimony surfactant during growth. The composition, strain, and order parameter of each sample were characterized by x-ray diffraction, and the bandgap was measured by photoluminescence. We find good agreement between the experimentally measured bandgaps and theoretically modeled curves.
Abstract not provided
Record efficiencies with triple-junction inverted metamorphic designs, modeling useful to optimize, and consider operating conditions before choosing design.