Search NASA⌕ Search

Engineering topics

Gelis, Artem V.

Publications and source records attributed to Gelis, Artem V..

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. Furthermore, these results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural Investigation of Technetium Dibutylphosphate Species Using X-ray Absorption Fine Structure Spectroscopy

The speciation of Tc after the extraction of Tc(IV) from H 2 O and 1 M HNO 3 by dibutylphosphoric acid (HDBP) in dodecane has been studied by X-ray absorption fine structure (XAFS) spectroscopy. Results show the formation of dimeric species with Tc 2 O 2 and Tc 2 O units, and the formulas [Tc 2 O 2 (DBP·HDBP) 4 ] (1) and [Tc 2 O(NO 3 ) 2 (DBP) 2 (DBP·HDBP) 2 ] (2) were, respectively, proposed for the species extracted from H 2 O and 1 M HNO 3 . The interatomic Tc–Tc distances found in the Tc 2 O 2 and Tc 2 O units [2.55(3) and 3.57(4) Å, respectively] are similar to the ones found in Tc(IV) dinuclear species. It is likely that the speciation of Tc(IV) in dodecane is due to the extraction of a species with a Tc 2 O unit for (2) and to the redissolution of a Tc(IV)-DBP solid for (1). The XAFS results for (1) and (2) were compared to that obtained for the extraction of Tc(IV) with TBP/HDBP/dodecane from 0.5 M HNO 3 , (3) which highlight the formation of Tc mononuclear nitrate species {i.e. [Tc(NO 3 ) 3 (DBP)] or [Tc(NO 3 ) 2 (DBP·HDBP)]}. These results confirm the importance of the preparation and speciation of the Tc(IV) aqueous solutions prior to extraction and how much this influences and drives the final Tc speciation in organic extraction. Here, these studies outline the complexity of Tc separation chemistry and provide insights into the behavior of Tc during the reprocessing of used nuclear fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]–actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. Here, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV–vis spectroscopy, and then the speciation of HEH[EHP]–metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31 P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31 P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

31P NMR↗

Transuranium Sulfide via the Boron Chalcogen Mixture Method and Reversible Water Uptake in the NaCu T S 3 Family

The behavior of 5f electrons in soft ligand environments makes actinides, and especially transuranium chalcogenides, an intriguing class of materials for fundamental studies. Due to the affinity of actinides for oxygen, however, it is a challenge to synthesize actinide chalcogenides using non-metallic reagents. Using the Boron Chalcogen Mixture (BCM) method, we achieved the synthesis of the transuranium sulfide NaCuNpS 3 starting from the oxide reagent, NpO 2 . Via the same synthetic route, the isostructural composition of NaCuUS 3 was synthesized and the material contrasted with NaCuNpS 3 . Single crystals of the U-analog, NaCuUS 3 , were found to undergo an unexpected reversible hydration process to form NaCuUS 3 ·xH 2 O (x ≈ 1.5). Here, a large combination of techniques was used to fully characterize the structure, hydration process, and electronic structures, specifically a combination of single crystal, powder, high temperature powder X-ray diffraction, extended X-ray ab-sorption fine structure, infrared, and inductively coupled plasma spectroscopies, thermogravimetric analysis, and density functional theory calculations. The outcome of these analyses enabled us to determine the composition of NaCuUS 3 ·xH 2 O and obtain a structural model that demonstrated the retention of the local structure within the [CuUS 3 ] – layers throughout the hydration-dehydration process. Band structure, density of states, and Bader charge calculations for NaCuUS 3 , NaCu-US 3 ·xH 2 O, and NaCuNpS 3 along with X-ray absorption near edge structure, UV-vis-NIR and work function measurements on ACuUS 3 (A = Na, K, and Rb) and NaCuUS 3 ·xH 2 O samples were carried out to demonstrate that electronic properties arise from the [CuTS 3 ] – layers and show surprisingly little dependence on the interlayer distance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recovery of high specific activity molybdenum-99 from accelerator-induced fission on low-enriched uranium for technetium-99m generators

Abstract A new process was developed to recover high specific activity (no carrier added) 99 Mo from electron-accelerator irradiated U 3 O 8 or uranyl sulfate targets. The process leverages a novel solvent extraction scheme to recover Mo using di(2-ethylhexyl) phosphoric acid following uranium and transuranics removal with tri- n -butyl phosphate. An anion-exchange concentration column step provides a final purification, generating pure 99 Mo intended for making 99 Mo/ 99m Tc generators. The process was demonstrated with irradiated uranium targets resulting in more than 95% 99 Mo recovery and without presence of fission products or actinides in the product.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Countercurrent Actinide Lanthanide Separation Process (ALSEP) Demonstration Test with a Simulated PUREX Raffinate in Centrifugal Contactors on the Laboratory Scale

An Actinide Lanthanide Separation Process (ALSEP) for the separation of trivalent actinides (An(III)) from simulated raffinate solution was successfully demonstrated using a 32-stage 1 cm annular centrifugal contactor setup. The ALSEP solvent was composed of a mixture of 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra-(2-ethylhexyl)-diglycolamide (T2EHDGA) in n-dodecane. Flowsheet calculations and evaluation of the results were done using the Argonne’s Model for Universal Solvent Extraction (AMUSE) code using single-stage distribution data. The co-extraction of Zr(IV) and Pd(II) was prevented using CDTA (trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid) as a masking agent in the feed. For the scrubbing of co-extracted Mo; citrate-buffered acetohydroxamic acid was used. The separation of An(III) from the trivalent lanthanides (Ln(III)) was achieved using citrate-buffered diethylene-triamine-N,N,N',N",N"-pentaacetic acid (DTPA), and Ln(III) were efficiently back extracted using N,N,N',N'-tetraethyl-diglycolamide (TEDGA). A clean An(III) product was obtained with a recovery of 95% americium and curium. The Ln(III) were efficiently stripped; but the Ln(III) product contained 5% of the co-stripped An(III). The carryover of Am and Cm into the Ln(III) product is attributed to too few actinide stripping stages, which was constrained by the number of centrifugal contactors available. Improved separation would be achieved by increasing the number of An strip stages. The heavier lanthanides (Pr, Nd, Sm, Eu, and Gd) and yttrium were mainly routed to the Ln product, whereas the lighter lanthanides (La and Ce) were mostly routed to the raffinate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗