Search NASA⌕ Search

Engineering topics

Gennett, Thomas

Publications and source records attributed to Gennett, Thomas.

At least 55 records · Page 3

Kinetic Enhancement of Direct Hydrogenation of MgB 2 to Mg(BH 4 ) 2 upon Mechanical Milling with THF, MgH 2 , and/or Mg

Modification of magnesium diboride, MgB 2 , by mechanical milling with THF, MgH 2 , and/or Mg results in a lowering of the conditions required for its direct, bulk hydrogenation to magnesium borohydride, Mg(BH 4 ) 2 , by 300 bar and 100 degrees C. Following mechanical milling with MgH 2 or THF and Mg, MgB 2 can be hydrogenated to Mg(BH 4 ) 2 at 300 degrees C under 700 bar of H 2 while achieving ~54-71% conversion to the borohydride. The discovery of a means of dramatically lowering the conditions required for the hydrogenation of MgB 2 is an important step towards the development of a practical onboard hydrogen storage system based on hydrogen cycling between Mg(BH 4 ) 2 and MgB 2 . We suggest that mechano-milling with THF, Mg, and/or MgH 2 may possibly introduce defects in the MgB 2 structure which enhance hydrogenation. The ability to activate the MgB 2 through the introduction of structural defects transcends its relevance to hydrogen storage, as a method of overcoming its chemical inertness provides the key to harnessing other interesting properties of this material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Record High Hydrogen Storage Capacity in the Metal–Organic Framework Ni 2 ( m -dobdc) at Near-Ambient Temperatures

Hydrogen holds promise as a clean alternative automobile fuel, but its on-board storage presents significant challenges due to the low temperatures and/or high pressures required to achieve a sufficient energy density. The opportunity to significantly reduce the required pressure for high density H 2 storage persists for metal-organic frameworks due to their modular structures and large internal surface areas. The measurement of H 2 adsorption in such materials under conditions most relevant to on-board storage is crucial to understanding how these materials would perform in actual applications, although such data have to date been lacking. In the present work, the metal-organic frameworks M 2 (m-dobdc) (M = Co, Ni; m-dobdc 4- = 4,6-dioxido-1,3-benzenedicarboxylate) and the isomeric frameworks M 2 (dobdc) (M = Co, Ni; dobdc 4- = 1,4-dioxido-1,3-benzenedicarboxylate), which are known to have open metal cation sites that strongly interact with H 2 , were evaluated for their usable volumetric H 2 storage capacities over a range of near-ambient temperatures relevant to on-board storage. Based upon adsorption isotherm data, Ni 2 (m-dobdc) was found to be the top-performing physisorptive storage material with a usable volumetric capacity between 100 and 5 bar of 11.0 g/L at 25 °C and 23.0 g/L with a temperature swing between -75 and 25 °C. Additional neutron diffraction and infrared spectroscopy experiments performed with in situ dosing of D 2 or H 2 were used to probe the hydrogen storage properties of these materials under the relevant conditions. Finally, the results provide benchmark characteristics for comparison with future attempts to achieve improved adsorbents for mobile hydrogen storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of radical loading and oxidation on the conformation of organic radical polymers by small angle neutron scattering

Electrodes comprised of organic polymeric materials containing stable radicals have become attractive for incorporation into organic radical batteries. Specifically, the radical polymer poly(2,2,6,6-tetramethylpeperidinyloxy-4-yl methacrylate) (PTMA) exhibits extremely rapid electron charge transport rates, comparable to traditional transition metal ions. However, the structural reorganization that the polymer undergoes during charging is not well understood. Using small angle neutron scattering, we have investigated the structural changes the PTMA polymer exhibits with variation of radical concentration or oxidation. The results indicate that as the radical concentration is increased, the polymer becomes more inflexible and begins to aggregate with neighboring polymer chains as the radicals on the polymer align with neighboring solvated chains. Additional studies monitor the conformational changes of the PTMA copolymers with oxidation to mimic the structural changes that the polymer undergoes during charging. These results show that polymers with low radical densities are more susceptible to reorientation with charging than a polymer that is fully saturated with radical moieties. This study therefore provides seminal fundamental information that identifies the relationship between radical density and molecular structure providing crucial insight that is needed to improve the performance of organic radical batteries.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulation Study of Solvent and State of Charge Effects on Solid-Phase Structure and Counterion Binding in a Nitroxide Radical Containing Polymer Energy Storage Material

Here we performed molecular dynamics simulations to understand the effects of solvent swelling and state of charge (SOC) on the redox active, organic radical cathode material poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) (PTMA). We show that the polar solvent acetonitrile primarily solvates the nitroxide radical without disrupting the packing of the (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) pendant groups of PTMA. We also simulated bulk PTMA in different SOC, 25%, 50%, 75%, and 100%, by converting the appropriate number of TEMPO groups to the cation charge state and adding BF 4 - counterions to the simulation. At each SOC the packing of PTMA, the solvent, and the counterions were examined. The binding of the anion to the nitroxide cation site was examined using the potential of mean force and found to be on the order of tens of meV, with a binding energy that decreased with increasing SOC. Additionally, we found that the cation state is stabilized by the presence of a nearby anion by more than 1 eV, and the implications of this stabilization on charge transport are discussed. Finally, we describe the implications of our results for how the SOC of an organic electrode affects electron and anion charge transport during the charging and discharging processes.

36 MATERIALS SCIENCE↗

Hybrid radical energy storage device and method of making

Hybrid radical energy storage devices, such as batteries or electrochemical devices, and methods of use and making are disclosed. Also described herein are electrodes and electrolytes useful in energy storage devices, for example, radical polymer cathode materials and electrolytes for use in organic radical batteries.

25 ENERGY STORAGE↗

Confirmation of the Dominant Defect Mechanism in Amorphous In-Zn-O Through the Application of In Situ Brouwer Analysis

The dominant point defect mechanism of amorphous (a-) indium zinc oxide (IZO) was probed through in situ electrical characterization of sputtered a-IZO thin films in response to changes in oxygen partial pressure (pO2) at 300 degrees C. The results yielded a power law dependence of conductivity (s) versus pOinline image of ~-1/6. This experimental method, known as Brouwer analysis, confirms doubly-charged oxygen vacancies as the dominant defect species in a-IZO. The success of this study suggests that Brouwer analysis is a viable method for studying the defect mechanisms of amorphous oxides.

14 SOLAR ENERGY↗

Hybrid radical energy storage device and method of making

Hybrid radical energy storage devices, such as batteries or electrochemical devices, and methods of use and making are disclosed. Also described herein are electrodes and electrolytes useful in energy storage devices, for example, radical polymer cathode materials and electrolytes for use in organic radical batteries.

25 ENERGY STORAGE↗