Thermodynamic analysis of interactions between Ni-based solid oxide fuel cells (SOFC) anodes and trace species in a survey of coal syngas
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Gerdes, Kirk.
Explore the source record for details and available documents.
An overview of the results of SOFC anode interactions with phosphorus, arsenic, selenium, sulfur, antimony, and hydrogen chloride as single contaminants or in combinations is discussed. Tests were performed using both anode- and electrolyte-supported cells in synthetic and actual coal gas for periods greater than 1000 hours. Post-test analyses were performed to identify reaction products formed and their distribution, and compared to phases expected from thermochemical modeling. The ultimate purpose of this work is to establish maximum permissible concentrations for impurities in coal gas, to aid in the selection of appropriate coal gas clean-up technologies.
Grain-boundary plane, misorientation angle, grain size, and grain-boundary energy distributions were quantified using electron backscatter diffraction data for dense polycrystalline yttria-stabilized zirconia, to understand interfacial crystallography in solid oxide fuel cells. Tape-cast samples were sintered at 14501C for 4 h and annealed for at least 100 h between 8001C and 16501C. Distributions obtained from both three-dimensional (3D) reconstructions and stereological analyses of 2D sections demonstrated that the (100) boundary planes {(111)} have relative areas larger {smaller} than expected in a random distribution, and that the boundary plane distribution is inversely correlated to the boundary energy distribution.
An alternative high temperature fuel cell system, called Liquid Tin Anode Solid Oxide Fuel Cell (LTA-SOFC) technology, is presently under consideration by NETL for the ability to directly convert coal. Before such a fuel cell concept can be considered in system studies, a detailed assessment for the electrochemical activity and SnO and O-atom diffusion within the liquid tin needs to be performed. In addition, the fundamental thermodynamic operation of such a concept needs to be properly analyzed. Initial research efforts to characterize the tin electrochemistry on a button cell at 900°C and with a tin thickness of 6mm showed a peak power density of 40 mW/cm2, and an activation energy for total resistivity of 185600 J/gm-mol. Higher power densities are expected with a more optimized electrolyte interface, and additional tests are being planned. A review of the liquid tin anode cell theoretical operation and performance data will be presented.