High-Efficiency Polycrystalline CdS/CdTe Solar Cells on Buffered Commercial TCO-Coated Glass
Abstract not provided
Engineering topics
Publications and source records attributed to Gessert, T.
Abstract not provided
EPIR Technologies, Inc. reports the production of thin film polycrystalline CdTe devices with National Renewable Energy Laboratory (NREL)-verified efficiencies above 15%. While previous reporting of high efficiency poly-CdTe solar cells utilized high-temperature technical glass, EPIR's cells were produced on commercially-available conductive glass. The devices exhibit fill factors up to 77% and short-circuit current densities around 24 mA/cm{sup 2}. EPIR developed a robust process for producing thin film CdTe solar cells through implementation of a high resistivity SnO{sub 2} buffer layer and optimization of the CdS window layer thickness. The effects of the high resistivity buffer layer on device performance were investigated, demonstrating improved overall performance and yield. To our knowledge, these are among the highest efficiencies yet reported and NREL-verified for a thin film CdTe solar cell fabricated using commercial conductive glass.
Abstract not provided
Abstract not provided
Abstract not provided
Compared to commercial SnO2 (with similar film thickness and sheet resistance), research-grade SnO2 has higher optical transmittance and higher electron mobility. Based on our study, changing the glass substrate and improving the SnO2 quality could improve the optical properties of commercial SnO2.
A comparison between research-grade, tin-oxide (SnO{sub 2}) thin films and those available from commercial sources is performed. The research-grade SnO{sub 2} film is fabricated at NREL by low-pressure metal-organic chemical vapor deposition. The commercial SnO{sub 2} films are Pilkington Tec 8 and Tec 15 fabricated by atmospheric-pressure chemical vapor deposition. Optical, structural, and compositional analyses are performed. From the optical analysis, an estimation of the current losses due to the SnO{sub 2} layer and glass is provided. Our analysis indicates that the optical properties of commercial SnO{sub 2} could be improved for PV usage.
This project supports the Solar America Initiative by: (1) assistance to SAI Incubators (Primestar Solar, AvA Solar); (2) providing industry with baseline understanding of CdS/CdTe device formation and reliability--incorporation of low-cost, high quality TCOs, functionality and options for buffer layers, effect of various CdS options, effect of and importance CdSTe alloy formation, effect and options for CdCl{sub 2} treatment, effect and options for back contact, and effect of residual impurities during all stages of device formation; (3) understanding modes and mechanisms of cell-level stability; and (4) establishment of CdTe PDIL Tool for rapid material and process screening.