Search NASA⌕ Search

Engineering topics

Gettelman, A.

Publications and source records attributed to Gettelman, A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Has Reducing Ship Emissions Brought Forward Global Warming?

Abstract Ships brighten low marine clouds from emissions of sulfur and aerosols, resulting in visible “ship tracks”. In 2020, new shipping regulations mandated an ∼80% reduction in the allowed fuel sulfur content. Recent observations indicate that visible ship tracks have decreased. Model simulations indicate that since 2020 shipping regulations have induced a net radiative forcing of +0.12 Wm −2 . Analysis of recent temperature anomalies indicates Northern Hemisphere surface temperature anomalies in 2022–2023 are correlated with observed cloud radiative forcing and the cloud radiative forcing is spatially correlated with the simulated radiative forcing from the 2020 shipping emission changes. Shipping emissions changes could be accelerating global warming. To better constrain these estimates, better access to ship position data and understanding of ship aerosol emissions are needed. Understanding the risks and benefits of emissions reductions and the difficultly in robust attribution highlights the large uncertainty in attributing proposed deliberate climate intervention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Climate, Variability, and Climate Sensitivity of “Middle Atmosphere” Chemistry Configurations of the Community Earth System Model Version 2, Whole Atmosphere Community Climate Model Version 6 (CESM2(WACCM6))

Abstract Simulating whole atmosphere dynamics, chemistry, and physics is computationally expensive. It can require high vertical resolution throughout the middle and upper atmosphere, as well as a comprehensive chemistry and aerosol scheme coupled to radiation physics. An unintentional outcome of the development of one of the most sophisticated and hence computationally expensive model configurations is that it often excludes a broad community of users with limited computational resources. Here, we analyze two configurations of the Community Earth System Model Version 2, Whole Atmosphere Community Climate Model Version 6 (CESM2(WACCM6)) with simplified “middle atmosphere” chemistry at nominal 1 and 2° horizontal resolutions. Using observations, a reanalysis, and direct model comparisons, we find that these configurations generally reproduce the climate, variability, and climate sensitivity of the 1° nominal horizontal resolution configuration with comprehensive chemistry. While the background stratospheric aerosol optical depth is elevated in the middle atmosphere configurations as compared to the comprehensive chemistry configuration, it is comparable among all configurations during volcanic eruptions. For any purposes other than those needing an accurate representation of tropospheric organic chemistry and secondary organic aerosols, these simplified chemistry configurations deliver reliable simulations of the whole atmosphere that require 35% and 86% fewer computational resources at nominal 1 and 2° horizontal resolution, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Simulating Observations of Southern Ocean Clouds and Implications for Climate

Southern Ocean (S. Ocean) clouds are important for climate prediction. Yet previous global climate models failed to accurately represent cloud phase distributions in this observation-sparse region. In this study, data from the Southern Ocean Clouds, Radiation, Aerosol, Transport Experimental Study (SOCRATES) experiment is compared to constrained simulations from a global climate model (the Community Atmosphere Model, CAM). Nudged versions of CAM are found to reproduce many of the features of detailed in situ observations, such as cloud location, cloud phase, and boundary layer structure. The simulation in CAM6 has improved its representation of S. Ocean clouds with adjustments to the ice nucleation and cloud microphysics schemes that permit more supercooled liquid. Comparisons between modeled and observed hydrometeor size distributions suggest that the modeled hydrometeor size distributions represent the dual peaked shape and form of observed distributions, which is remarkable given the scale difference between model and observations. Comparison to satellite observations of cloud physics is difficult due to model assumptions that do not match retrieval assumptions. Some biases in the model's representation of S. Ocean clouds and aerosols remain, but the detailed cloud physical parameterization provides a basis for process level improvement and direct comparisons to observations. This is crucial because cloud feedbacks and climate sensitivity are sensitive to the representation of S. Ocean clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Bounding Global Aerosol Radiative Forcing of Climate Change

Abstract Aerosols interact with radiation and clouds. Substantial progress made over the past 40 years in observing, understanding, and modeling these processes helped quantify the imbalance in the Earth's radiation budget caused by anthropogenic aerosols, called aerosol radiative forcing, but uncertainties remain large. This review provides a new range of aerosol radiative forcing over the industrial era based on multiple, traceable, and arguable lines of evidence, including modeling approaches, theoretical considerations, and observations. Improved understanding of aerosol absorption and the causes of trends in surface radiative fluxes constrain the forcing from aerosol‐radiation interactions. A robust theoretical foundation and convincing evidence constrain the forcing caused by aerosol‐driven increases in liquid cloud droplet number concentration. However, the influence of anthropogenic aerosols on cloud liquid water content and cloud fraction is less clear, and the influence on mixed‐phase and ice clouds remains poorly constrained. Observed changes in surface temperature and radiative fluxes provide additional constraints. These multiple lines of evidence lead to a 68% confidence interval for the total aerosol effective radiative forcing of ‐1.6 to ‐0.6 W m −2 , or ‐2.0 to ‐0.4 W m −2 with a 90% likelihood. Those intervals are of similar width to the last Intergovernmental Panel on Climate Change assessment but shifted toward more negative values. The uncertainty will narrow in the future by continuing to critically combine multiple lines of evidence, especially those addressing industrial‐era changes in aerosol sources and aerosol effects on liquid cloud amount and on ice clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Climate Forcing and Trends of Organic Aerosols in the Community Earth System Model (CESM2)

The Community Earth System Model version 2 (CESM2) includes three main atmospheric configurations: the Community Atmosphere Model version 6 (CAM6) with simplified chemistry and a simplified organic aerosol (OA) scheme, CAM6 with comprehensive tropospheric and stratospheric chemistry representation (CAM6-chem), and the Whole Atmosphere Community Climate Model version 6 (WACCM6). Both, CAM6-chem and WACCM6 include a more comprehensive secondary organic aerosols (SOA) approach using the volatility basis set (vbs) scheme and prognostic stratospheric aerosols. This paper describes the different OA schemes available in the different atmospheric configurations of CESM2 and discusses differences in aerosol burden and resulting climate forcings. Derived OA burden and trends differ due to differences in OA formation using the different approaches. Regional differences in Aerosol Optical Depth with larger values using the comprehensive approach occur over SOA source regions. Stronger increasing SOA trends between 1960 and 2015 in WACCM6 compared to CAM6 are due to increasing biogenic emissions aligned with increasing surface temperatures. Using the comprehensive SOA approach further leads to improved comparisons to aircraft observations and SOA formation of ˜143 Tg/yr. We further use WACCM6 to identify source contributions of OA from biogenic, fossil fuel, and biomass burning emissions, to quantify SOA amounts and trends from these sources. Increasing SOA trends between 1960 and 2015 are the result of increasing biogenic emissions aligned with increasing surface temperatures. Biogenic emissions are at least two thirds of the total SOA burden. In addition, SOA source contributions from fossil fuel emissions become more important, with largest values over Southeast Asia. The estimated total anthropogenic forcing of OA in WACCM6 for 1995–2010 conditions is -0.43 W/m2, mostly from the aerosol direct effect.

Tilmes, S↗
DOE OSTI2019

High Climate Sensitivity in the Community Earth System Model Version 2 (CESM2)

The Community Earth System Model Version 2 (CESM2) has an equilibrium climate sensitivity (ECS) of 5.3 K. ECS is an emergent property of both climate feedbacks and aerosol forcing. The increase in ECS over the previous version (CESM1) is the result of cloud feedbacks. Interim versions of CESM2 had a land model that damped ECS. Part of the ECS change results from evolving the model configuration to reproduce the long-term trend of global and regional surface temperature over the twentieth century in response to climate forcings. Changes made to reduce sensitivity to aerosols also impacted cloud feedbacks, which significantly influence ECS. We report CESM2 simulations compare very well to observations of present climate. It is critical to understand whether the high ECS, outside the best estimate range of 1.5–4.5 K, is plausible.

58 GEOSCIENCES↗
DOE OSTI2019

The Single Column Atmosphere Model Version 6 (SCAM6): Not a Scam but a Tool for Model Evaluation and Development

The Single Column Atmosphere Model (SCAM) is a single column model version of the Community Atmosphere Model (CAM). Here we describe the functionality and features of SCAM6, available as part of CAM6 in the Community Earth System Model, version 2 (CESM2). SCAM6 features a wide selection of standard cases, as well as the ability to easily configure a case specified by the user based on a particular point in a CAM 3-D simulation. This work illustrates how SCAM6 reproduces CAM6 results for physical parameterizations, mostly of moisture and clouds. We demonstrate how SCAM6 can be used for model development through different physics selections, as well as with parameter sweep experiments to highlight the sensitivity of cloud properties to the specification of the vapor deposition process in the cloud microphysics. Furthermore, we use SCAM6 to illustrate the sensitivity of CAM6 cloud radiative properties and precipitation to variable drop number (cloud microphysics properties). Finally, we illustrate how SCAM6 can be used to explore critical emergent processes such as cloud feedbacks and show that CAM6 cloud responses to surface warming in stratus and stratocumulus regimes are similar to those in CAM5. CAM6 has a larger response in the shallow cumulus regime than CAM5. CAM6 cloud feedbacks in the shallow cumulus regime are sensitive to turbulence parameters. SCAM6 is thus a valuable tool for model development, evaluation, and scientific analy sis and an important part of the model hierarchy in Community Earth System Model, version 2.

58 GEOSCIENCES↗
DOE OSTI2018

NCAR Release of CAM‐SE in CESM2.0: A Reformulation of the Spectral Element Dynamical Core in Dry‐Mass Vertical Coordinates With Comprehensive Treatment of Condensates and Energy

Abstract It is the purpose of this paper to provide a comprehensive documentation of the new NCAR (National Center for Atmospheric Research) version of the spectral element (SE) dynamical core as part of the Community Earth System Model (CESM2.0) release. This version differs from previous releases of the SE dynamical core in several ways. Most notably the hybrid sigma vertical coordinate is based on dry air mass, the condensates are dynamically active in the thermodynamic and momentum equations (also referred to as condensate loading), and the continuous equations of motion conserve a more comprehensive total energy that includes condensates. Not related to the vertical coordinate change, the hyperviscosity operators and the vertical remapping algorithms have been modified. The code base has been significantly reduced, sped up, and cleaned up as part of integrating SE as a dynamical core in the CAM (Community Atmosphere Model) repository rather than importing the SE dynamical core from High‐Order Methods Modeling environment as an external code.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

An Intercomparative Study of the Effects of Aircraft Emissions on Surface Air Quality

This study intercompares, among five global models, the potential impacts of all commercial aircraft emissions worldwide on surface ozone and particulate matter (PM (sub 2.5)). The models include climate-response models (CRMs) with interactive meteorology, chemical-transport models (CTMs) with prescribed meteorology, and models that integrate aspects of both. Model inputs are harmonized in an effort to achieve a consensus about the state of understanding of impacts of 2006 commercial aviation emissions. Models find that aircraft increase near-surface ozone (0.3 to 1.9 percent globally), with qualitatively similar spatial distributions, highest in the Northern Hemisphere. Annual changes in surface-level PM (sub 2.5) in the CTMs (0.14 to 0.4 percent) and CRMs (-1.9 to 1.2 percent) depend on differences in nonaircraft baseline aerosol fields among models and the inclusion of feedbacks between aircraft emissions and changes in meteorology. The CTMs tend to result in an increase in surface PM (sub 2.5) primarily over high-traffic regions in the North American midlatitudes. The CRMs, on the other hand, demonstrate the effects of aviation emissions on changing meteorological fields that result in large perturbations over regions where natural emissions (e.g., soil dust and sea spray) occur. The changes in ozone and PM (sub 2.5) found here may be used to contextualize previous estimates of impacts of aircraft emissions on human health.

Air quality↗
DOE OSTI2016

Assessment of marine boundary layer cloud simulations in the CAM with CLUBB and updated microphysics scheme based on ARM observations from the Azores

To assess marine boundary layer (MBL) cloud simulations in three versions of the Community Atmosphere Model (CAM), three sets of short-term global hindcasts are performed and compared to Atmospheric Radiation Measurement Program (ARM) observations on Graciosa Island in the Azores from June 2009 to December 2010. Here, the three versions consist of CAM5.3 with default schemes (CAM5.3), CAM5.3 with Cloud Layers Unified By Binormals (CLUBB-MG1), and CAM5.3 with CLUBB and updated microphysics scheme (CLUBB-MG2). Our results show that relative to CAM5.3 default schemes, simulations with CLUBB better represent MBL cloud base height, the height of the major cloud layer, and the daily cloud cover variability. CLUBB also better simulates the relationship of cloud fraction to cloud liquid water path (LWP) most likely due to CLUBB's consistent treatment of these variables through a probability distribution function (PDF) approach. Subcloud evaporation of precipitation is substantially enhanced in simulations with CLUBB-MG2 and is more realistic based on the limited observational estimate. Despite these improvements, all model versions underestimate MBL cloud cover. CLUBB-MG2 reduces biases in in-cloud LWP (clouds are not too bright) but there are still too few of MBL clouds due to an underestimate in the frequency of overcast scenes. Thus, combining CLUBB with MG2 scheme better simulates MBL cloud processes, but because biases remain in MBL cloud cover CLUBB-MG2 does not improve the simulation of the surface shortwave cloud radiative effect (CRE SW ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

On the characteristics of aerosol indirect effect based on dynamic regimes in global climate models

Aerosol-cloud interactions continue to constitute a major source of uncertainty for the estimate of climate radiative forcing. The variation of aerosol indirect effects (AIE) in climate models is investigated across different dynamical regimes, determined by monthly mean 500 hPa vertical pressure velocity (ω500), lower-tropospheric stability (LTS) and large-scale surface precipitation rate derived from several global climate models (GCMs), with a focus on liquid water path (LWP) response to cloud condensation nuclei (CCN) concentrations. The LWP sensitivity to aerosol perturbation within dynamic regimes is found to exhibit a large spread among these GCMs. It is in regimes of strong large-scale ascend (ω500 < -25 hPa/d) and low clouds (stratocumulus and trade wind cumulus) where the models differ most. Shortwave aerosol indirect forcing is also found to differ significantly among different regimes. Shortwave aerosol indirect forcing in ascending regimes is as large as that in stratocumulus regimes, which indicates that regimes with strong large-scale ascend are as important as stratocumulus regimes in studying AIE. 42" It is further shown that shortwave aerosol indirect forcing over regions with high monthly large-scale surface precipitation rate (> 0.1 mm/d) contributes the most to the total aerosol indirect forcing (from 64% to nearly 100%). Results show that the uncertainty in AIE is even larger within specific dynamical regimes than that globally, pointing to the need to reduce the uncertainty in AIE in different dynamical regimes.

Zhang, S.↗
DOE OSTI2016

Simulated differences in 21st century aridity due to different scenarios of greenhouse gases and aerosols

Aridity, defined as the ratio of precipitation (P) to potential evapotranspiration (PET) over land, is critical to natural ecosystems and agricultural production. Global climate models project global decreases of P/PET (drying) in the 21st century. We examine the uncertainty of aridity projections due to scenarios of greenhouse gases (GHGs) and aerosols with three sets of ensemble simulations from a single climate model, the Community Earth System Model (CESM1). Ensembles consist of two Radiative Concentration Pathways (RCPs) and a scenario with RCP-like GHGs but with aerosol precursor emissions and atmospheric oxidants fixed at the year 2005 level. Under a high GHGs emission scenario (RCP8.5), global land P/PET decreases (drying) by 6.4 ± 0.8 % in 2060–2080 relative to 1985–2005. A GHG mitigation scenario (RCP4.5) would reduce the drying (P/PET decrease) to 3.7 ± 0.6 %. Although future aerosol emissions reduction would increase P, we find that it has little impact on global aridity due to offsetting effects on PET. Regionally, deceasing aerosols can have significant effects and aerosol-induced P/PET changes are due to different factors across different regions. When normalized by global mean temperature response, GHGs decrease global land P/PET by 2.7 ± 0.6 %/°C and surface temperature changes dominate GHG-induced P/PET change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Simulated responses of terrestrial aridity to black carbon and sulfate aerosols

Aridity index (AI), defined as the ratio of precipitation to potential evapotranspiration (PET), is a measure of the dryness of terrestrial climate. Global climate models generally project future decreases of AI (drying) associated with global warming scenarios driven by increasing greenhouse gas and declining aerosols. Given their different effects in the climate system, scattering and absorbing aerosols may affect AI differently. In this work, we explore the terrestrial aridity responses to anthropogenic black carbon (BC) and sulfate (SO 4 ) aerosols with Community Earth System Model simulations. Positive BC radiative forcing decreases precipitation averaged over global land at a rate of 0.9%/°C of global mean surface temperature increase (moderate drying), while BC radiative forcing increases PET by 1.0%/°C (also drying). BC leads to a global decrease of 1.9%/°C in AI (drying). SO 4 forcing is negative and causes precipitation a decrease at a rate of 6.7%/°C cooling (strong drying). PET also decreases in response to SO 4 aerosol cooling by 6.3%/°C cooling (contributing to moistening). Thus, SO 4 cooling leads to a small decrease in AI (drying) by 0.4%/°C cooling. Despite the opposite effects on global mean temperature, BC and SO 4 both contribute to the twentieth century drying (AI decrease). Sensitivity test indicates that surface temperature and surface available energy changes dominate BC- and SO 4 -induced PET changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

A unified parameterization of clouds and turbulence using CLUBB and subcolumns in the Community Atmosphere Model

Most global climate models parameterize separate cloud types using separate parameterizations. This approach has several disadvantages, including obscure interactions between parameterizations and inaccurate triggering of cumulus parameterizations. Alternatively, a unified cloud parameterization uses one equation set to represent all cloud types. Such cloud types include stratiform liquid and ice cloud, shallow convective cloud, and deep convective cloud. Vital to the success of a unified parameterization is a general interface between clouds and microphysics. One such interface involves drawing Monte Carlo samples of subgrid variability of temperature, water vapor, cloud liquid, and cloud ice, and feeding the sample points into a microphysics scheme. This study evaluates a unified cloud parameterization and a Monte Carlo microphysics interface that has been implemented in the Community Atmosphere Model (CAM) version 5.3. Model computational expense is estimated, and sensitivity to the number of subcolumns is investigated. Results describing the mean climate and tropical variability from global simulations are presented. The new model shows a degradation in precipitation skill but improvements in shortwave cloud forcing, liquid water path, long-wave cloud forcing, precipitable water, and tropical wave simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

A unified parameterization of clouds and turbulence using CLUBB and subcolumns in the Community Atmosphere Model

Most global climate models parameterize separate cloud types using separate parameterizations. This approach has several disadvantages, including obscure interactions between parameterizations and inaccurate triggering of cumulus parameterizations. Alternatively, a unified cloud parameterization uses one equation set to represent all cloud types. Such cloud types include stratiform liquid and ice cloud, shallow convective cloud, and deep convective cloud. Vital to the success of a unified parameterization is a general interface between clouds and microphysics. One such interface involves drawing Monte Carlo samples of subgrid variability of temperature, water vapor, cloud liquid, and cloud ice, and feeding the sample points into a microphysics scheme.This study evaluates a unified cloud parameterization and a Monte Carlo microphysics interface that has been implemented in the Community Atmosphere Model (CAM) version 5.3. Results describing the mean climate and tropical variability from global simulations are presented. The new model shows a degradation in precipitation skill but improvements in short-wave cloud forcing, liquid water path, long-wave cloud forcing, precipitable water, and tropical wave simulation. Also presented are estimations of computational expense and investigation of sensitivity to number of subcolumns.

58 GEOSCIENCES↗
DOE OSTI2015

Advanced Two-Moment Bulk Microphysics for Global Models. Part II: Global Model Solutions and Aerosol–Cloud Interactions*

A modified microphysics scheme is implemented in the Community Atmosphere Model, version 5 (CAM5). The new scheme features prognostic precipitation. The coupling between the microphysics and the rest of the model is modified to make it more flexible. Single-column tests show the new microphysics can simulate a constrained drizzling stratocumulus case. Substepping the cloud condensation (macrophysics) within a time step improves single-column results. Simulations of mixed-phase cases are strongly sensitive to ice nucleation. The new microphysics alters process rates in both single-column and global simulations, even at low (200 km) horizontal resolution. Thus, prognostic precipitation can be important, even in low-resolution simulations where advection of precipitation is not important. Accretion dominates as liquid water path increases in agreement with cloud-resolving model simulations and estimates from observations. The new microphysics with prognostic precipitation increases the ratio of accretion over autoconversion. Additionally, the change in process rates appears to significantly reduce aerosol–cloud interactions and indirect radiative effects of anthropogenic aerosols by up to 33% (depending on substepping) to below 1 W m-2 of cooling between simulations with preindustrial (1850) and present-day (2000) aerosol emissions.

58 GEOSCIENCES↗