Engineering topics

Ghai, Y.

Publications and source records attributed to Ghai, Y..

5 records

DOE OSTI2024

MHD stability trends and improved performance of LHD inward-shifted configurations: The role of the neutral beam current drive and thermal plasma density

The aim of the present study is to analyze the effect of the neutral beam current drive (NBCD), thermal plasma density, and NBI operational regime on the stability of pressure gradient-driven modes (PGDM) and Alfvén eigenmodes (AE) in LHD inward-shifted configurations. The stabilization of n/m = 1/2 PGDM (n toroidal mode and m poloidal mode) is observed in the discharge 167 800 during the co-NBCD phase. The iota profile evolution measured by motional stark effect diagnostic may indicate the iota profile up-shift caused by the co-NBCD can induce a non-resonant transition of the rational surface 1/2 before the mode stabilization. The evolution of the iota profile and continuum gaps in the discharge 167 805 during the ctr-NBCD phase leads to the stabilization of the AE, caused by the narrowing of the continuum gap as the iota profile down-shift. Opposite stability trends are identified for PGDM and AE stability with respect to the thermal plasma density. A larger thermal plasma density (larger thermal β) further enhances PGDM although the continuum gaps are narrower leading to configurations with stable AEs. The linear stability of AEs is analyzed using the gyro-fluid FAR3d code to reproduce the AE stability trends observed in the experiments with respect to the NBCD and thermal plasma density. The analysis of hypothetical scenarios dedicated to study different NBI operational regimes with respect to EP energy, and β and radial density profiles indicate off-axis NBI operation shows a higher EP β threshold to destabilize AEs compared to on-axis configuration. This is explained by the presence of a TAE gap in the inner plasma region, easily destabilized by an on-axis NBI injection. The control of the NBCD and thermal plasma in the discharge 167 800 shows a transitory stabilization of PGDM and AEs, as well as an improved discharge performance identified by an increment of the neutron fluxes.

Varela, Jacobo↗

DOE OSTI2023

Study of Alfvén eigenmode stability in Quasi-Poloidal Stellarator (QPS) plasma using a Landau closure model

The aim of this study is to analyze the linear stability of Alfvén eigenmodes (AE) in the QPS device heated by a tangential neutral beam injector (NBI). The analysis is performed using the gyro-fluid code FAR3d, that solves the reduced MHD equations for the thermal plasma coupled with moments of the kinetic equation for the energetic particles (EP). The AE stability is calculated in several operational regimes of the tangential NBI: EP β between 0.001 and 0.1, EP energy between 12 and 180 keV and different radial locations of the beam. The analysis is performed for vacuum and finite β equilibria as well as QPS configurations with two and three periods. The EP β threshold in the vacuum case is 0.001 and the AE frequency is lower as the energy of the EP population decreases. Toroidal Alfvén eigenmodes with f = 80–120 kHz and elliptical AE between f = 120–350 kHz are triggered between the middle-outer plasma region ($r/a \gt 0.5$). The AE stability improves in the simulations with finite β equilibria and three period configurations with respect to the vacuum case with two periods because the continuum gaps are slender, leading to a higher threshold of the EP β, above 0.03 for the AEs triggered by the helical mode families. Helical effects are not strong enough to destabilize Helical Alfvén eigenmodes, the AEs with the largest growth rates are triggered by the n = 1 and n = 2 toroidal families.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Analysis of the ECH effect on EPM/AE stability in Heliotron J plasma using a Landau closure model

The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfvén eigenmodes (AEs) and energetic particle modes (EPMs) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The simulations reproduce the AE/EPM stability trends observed in the experiments as the electron temperature (T e ) increases, modifying the thermal plasma β, EP β and EP slowing-down time. Particularly, the $n/m = 1/2$ EPM and $2/4$ Global AE are stabilized in the low-bumpiness (LB) configuration due to an enhancement of the continuum, finite Larmor radius and e-i Landau damping effects as the thermal β increases. On the other hand, a larger ECH injection power cannot stabilize the AE/EPM in medium-bumpiness and high-bumpiness (HB) configurations because the damping effects are weaker compared to the LB case, unable to balance the further destabilization induced by an enhanced EP resonance as the EP slowing-down time and EP β increases with T e .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Effects of negative triangularity shaping on energetic particle driven Alfvén eigenmodes in DIII-D

Shape variations from positive to negative triangularity may lead to improved performance regimes in a tokamak with a reduction in microturbulence as well as improved thermal confinement. The motivation of this investigation is to model and compare the neutral beam driven Alfvén eigenmode (AE) activity in two DIII-D discharges with positive and negative triangularity shaping of plasma. The simulations are performed using the linear version of the FAR3d code, which solves the reduced MHD equations for thermal plasma with addition of moment equations for the energetic ion density and parallel velocity with appropriate Landau closure relations. Overall, our numerical results indicate that for similar physical parameters, the unstable AEs observed in the negative triangularity case have lower growth rates as compared to the positive triangularity regime. Our findings may be useful to analyze the influence of the reverse-D like geometry on the AE instabilities in DIII-D and may lead to better configurations for minimizing fast ion losses in a tokamak device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Study of the Alfven eigenmodes stability in CFQS plasma using a Landau closure model

The aim of this study is to analyze the stability of the Alfven eigenmodes (AE) in the Chinese First Quasi-axisymmetric Stellarator (CFQS). The AE stability is calculated using the code FAR3d that solves the reduced MHD equations to describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moment for the energetic particles (EP) species including the effect of the helical couplings and acoustic modes. The Landau damping and resonant destabilization effects are added in the model by a given closure relation. The simulation results indicate the destabilization of n = 1 to 4 AEs by EP during the slowing down process, particularly n = 1 and n = 2 toroidal AEs (TAE), n = 3 elliptical AE (EAE) and n = 4 non circular AE (NAE). If the resonance is caused by EPs with an energy above 17 keV (weakly thermalized EP), n = 2 EAEs and n = 3 NAEs are unstable. On the other hand, EPs with an energy below 17 keV (late thermalization stage) lead to the destabilization of n = 3 and n = 4 TAEs. The simulations for an off-axis NBI injection indicate the further destabilization of n = 2 to 4 AEs although the growth rate of the n = 1 AEs slightly decreases, so no clear optimization trend with respect to the NBI deposition region is identified. In addition, n = 2, 4 helical AE (HAE) are unstable above an EP β threshold. Also, if the thermal β of the simulation increases (higher thermal plasma density) the AE stability of the plasma improves. Overall, the simulations including the effect of the finite Larmor radius and electron-ion Landau damping show the stabilization of the n = 1 to 4 EAE/NAEs as well as a decrease of the growth rate and frequency of the n = 1 to 4 BAE/TAEs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗