Search NASA⌕ Search

Engineering topics

Ghoniem, Nasr

Publications and source records attributed to Ghoniem, Nasr.

At least 19 records

A probabilistic-phase field model for the fracture of brittle materials

Abstract We develop a computational method to determine the failure probability of brittle materials under general mechanical loading conditions. The method is a combination of two parts: (1) numerical simulations of materials with multiple cracks using phase field theory, where the complete fracture process is viewed as ‘damage percolation’ along critical paths or clusters of cracks, rather than the traditional weak-link failure mechanism of Weibull, and (2) an extension of the Batdorf statistical theory of fracture to finite domains, where it is implemented within the finite element framework. The results of phase-field simulations at the ‘percolation threshold’ are used as failure data in the Batdorf theory to determine the overall probability of failure. The input to this approach is the size distribution of cracks in a pristine material. An example is shown, where alumina samples that were previously tested by Abe and coworkers (Abeet al2003J. Am. Ceram. Soc.861019–21) in four-point loading are compared to the results of our numerical simulations. The approach developed here has the advantage of being extendable to more complex thermomechanical loading.

Materials Science↗

Design, fabrication, and testing of a water-cooled tungsten-foam high-heat flux plasma-facing module

Here, we present a comprehensive study detailing the design, fabrication and testing a new modular “finger” component, featuring a hexagonal tungsten foam armor tile bonded to the top surface of the water-cooled finger unit. The mechanical, thermal, and particle transport properties of the tungsten foam armor were determined for a wide range of porosity and cell size, and then combined in an equivalent solid material with “effective” properties suitable for large-scale simulations. A series of 3-D multiphysics simulations for coupled thermal and mechanical behavior of the “finger” module are used to optimize the design before fabrication. The simulation results show that, for the expected experimental conditions, a safe range of heat flux and foam porosity is possible for both water-cooling and helium-cooling. Based on these multiphysics simulations, an optimum finger cooling module has been fabricated at Ultramet, Inc. A series of experiments were designed to study the thermomechanical performance of the “finger” unit under steady-state and transient thermal loading at surface heat flux up to 16 MW/m 2 in the High Energy Flux Test facility (HEFTY) at UCLA. Testing conditions included low-power, steady-state plasma exposure at 6 MW/m 2 , followed by severe high heat flux cycles at 16 MW/m 2 . Results of these tests are explained through comparisons with multiphysics simulations. To eliminate the effects of thermomechanical damage carried out on a module on its thermo-mechanical response on a subsequent test, three different yet identically designed and fabricated finger modules were tested. The results show that the current design is capable of cooling the walls of fusion devices at surface heat flux up to 6 MW/m 2 without failure, and that the failure heat flux limit is below 16 MW/m 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A coupled vacancy diffusion-dislocation dynamics model for the climb-glide motion of jogged screw dislocations

Here, we develop a novel model to study the climb/glide motion of jogged screw dislocations within the discrete dislocation dynamics (DDD) framework. We present results for the dependence of the climb velocity on the applied stress and on the jog size and distribution statistics. We show that the model predictions are consistent with experimental data in both γ-TiAl and Zircaloy-4. The ranges of the applied stress and jog spacing that determine the dominance of one of three dislocation mechanisms are identified. These are the jog dragging, dipole dragging, and dipole bypass mechanisms, respectively. The overall dislocation motion in the jog dragging regime is composed of glide of screw segments and climb of jogs, controlling the plastic strain and the creep rate, respectively. Based on current simulations and on a detailed examination of the predicted jog heights compared to experiments, we advance the hypothesis that a combination of jog dragging and dipole bypass mechanisms is necessary to reproduce the high creep rate observed in some experiments.

36 MATERIALS SCIENCE↗

Prismatic-to-basal plastic slip transition in zirconium

Here, we model three-dimensional dislocation ensembles in Zr pillars using newly developed mobility laws for dislocations on prismatic and basal planes. The effects of the loading orientation and temperature on the micro-scale mechanical response of single crystals are systematically explored. Easy dislocation glide is observed on prismatic planes, while hard glide occurs on basal planes. By selection of sample temperature and loading orientation, we show that the transition from prismatic to basal glide of dislocation ensembles can be controlled. We also show that the presence of dislocation cross-slip strongly promotes prismatic glide as a result of prismatic/basal cross-slip energy asymmetry. Cross-slip does not alter the occurrence of plastic slip transition but only induces a shift towards higher temperatures. The preponderance of plastic slip on basal or prismatic planes is found to be mediated by a transitional dislocation, which is composed of glissile segments on parallel prismatic planes connected by glissile super-jogs on basal planes. These findings provide a mechanistic understanding of experiments and highlight the significance of transitional prismatic-basal dislocations on the macroscopic characteristics of plasticity in HCP crystals.

36 MATERIALS SCIENCE↗

A model of thermal creep and annealing in finite domains based on coupled dislocation climb and vacancy diffusion

Here, we develop a framework to investigate thermal creep and annealing in finite domains, where the climb motion of discrete dislocations is coupled to the diffusion of a continuum vacancy field. The model is first formulated in a continuum finite-deformation setting. All governing equations and boundary conditions are obtained from a unified irreversible thermodynamics principle. The resulting model couples a mechanical boundary value problem (BVP), a vacancy diffusion BVP, and the climb and glide motion of the discrete dislocation network within the crystal. The framework is then linearized for implementation in three-dimensional (3D) discrete dislocation dynamics (DDD) simulations for arbitrary anisotropic crystals. A solution scheme is developed based on the superposition principle, which is imposed weakly on the dislocation network to obtain a Galerkin solution for the nodal climb velocities. The framework includes diffusional (Nabarro–Herring) creep deformation as well as dislocation creep by climb-assisted-glide. The method is applied to simulate the annealing of vacancy loops in Al, with good agreement to experimental measurements by Silcox and Hirsch. We further consider the effects of annealing under stress, and of the proximity of the vacancy loops to loaded and free boundaries Simulations in polycrystalline materials are carried out to highlight the effects of the grain size on dislocation climb and vacancy loop annealing. The method is also applied to estimate the creep rate due to climb-assisted glide of jogged-screw dislocations in γ-TiAl, and results are compared to experiments by Viswanathan et al. Finally, we discuss the effects of uniaxial and hydrostatic stresses on the two diffusive deformation pathways of the material, namely Nabarro–Herring creep and dislocation climb.

36 MATERIALS SCIENCE↗

A concurrent irradiation-mechanics multiscale coupling model

The vast majority of our current knowledge regarding the basic mechanisms controlling irradiation effect on mechanical properties is based almost entirely on the results of post-irradiation experiments or theoretical models. However, the concurrent effects of irradiation, mechanical stress, and thermal damage on the failure phenomena of materials and components remain largely unexplored due to its internal multiscale-multiphysics coupling nature. Here, we present here a concurrent irradiation-mechanics multiscale coupling model. The concurrent evolutions of nanoscale irradiation defect clusters, microscale dislocation configurations, and mechanical responses are well captured based on coupling cluster dynamics, discrete dislocation dynamics, and the finite element methods using an effective time marching scheme. Model predictions of defect densities and size are in general agreement with experimental observations. Irradiation hardening is shown to take place also in samples undergoing concurrent irradiation-mechanical loading, similar to samples tested post-irradiation. However, the occurrence of plastic flow localization and dislocation channel formation is not accompanied with apparent yield drop (softening) under concurrent irradiation-mechanical loading conditions, which is different from the post-irradiation case.

42 ENGINEERING↗

Intense cyclic heating effects on thermo-fracture and thermal shock of solid tungsten and open-cell tungsten foam

Here we investigate here the effects of transient (cyclic) arc-jet plasma and laser heating on fracture behavior of W-foam and solid tungsten. The two key parameters that control the foam thermomechanical response are its density and mean cell size expressed in Pores Per Inch (PPI). Tungsten foam samples were fabricated with Chemical Vapor Deposition (CVD) with variety of PPI and relative density. These were tested under two types of qualitatively different conditions: (1) high-enthalpy arc-jet, and (2) high-power cyclic laser heating. None of the foam samples showed macroscopic through-thickness cracks. However, distributed micro-cracks were observed on ligaments and their triple junctions. Under the same loading conditions, W-foam and solid tungsten showed similar crack network pattern and characteristic length-scale. However, Crack Opening Displacement (COD) was twice as large in solid W as compared to W-foam. Foam samples that have been previously exposed to a low-pressure helium plasma showed significant changes in their surface forming nano-texture fuzz which was removed by subsequent testing in the arc-jet. Extensive fracture and re-crystallization were observed in the thin solid W disk that was fully-constrained from expansion. Thicker and fully-constrained solid W disks did not display recrystallization, grain growth, and extensive cracking. However, thicker disks that were free to expand showed some recrystallization and extensive through-thickness cracks due to less effective cooling and thus higher temperatures. Laser beam testing showed no visible damage formation at 0.19 GW/m 2 and 0.38 GW/m 2 for both low-density (23%) and high-density (43%) foams at low pulses (100-1000). Micro-cracks were observed after 10,000 pulses at 0.19 GW/m 2 in both foams, and in low-density foam after 100,000 at 0.38 GW/m 2 . The nature of thermomechanical damage in W-foam exposed to extreme power (GW/m 2 ) short-duration laser pulses was found to be qualitatively similar to that of high power (MW/m 2 ) long-duration arc-jet.

36 MATERIALS SCIENCE↗

Effects of cyclic plasma heating on surface damage of micro-porous tungsten

The operating temperature window of solid tungsten (W) is dictated by its Ductile to Brittle Transition Temperature (DBTT) and re-crystallization temperature; roughly between 300-1300 °C. The brittleness of W at lower temperatures is exasperated when it undergoes recrystallization. We investigate here the thermal shock resistance of micro-porous W as a meta-material fabricated in a 3D open-cell network structure. We present experimental results for the effects of cyclic high-enthalpy arc-jet plasma on surface damage in three testing categories. Observed damage includes surface ablation of asperities, melting and solidification of W-fuzz on samples that have been exposed to a prior helium plasma, and micro-cracks at ligament triple junctions. Scanning electron microscope (SEM) observations show more micro-cracking on 54% and 23% foams compared to the 43% ones. In all tested samples, thermal expansion/contraction displacements were accommodated by ligament rotation and a network of micro-cracks. Furthermore, no large through-thickness crack were observed.

36 MATERIALS SCIENCE↗

Radiation effects on stress evolution and dimensional stability of large fusion energy structures

Here we assess the effects of neutron irradiation on the deformation and stress evolution of large-scale fusion energy structures. This is accomplished through non-linear finite element structural analysis of the coupled thermal and mechanical fields at the Beginning-Of-Life (BOL), at 45 dpa, and at 90 dpa. Radiation effects include volumetric swelling and the influence of radiation on the mechanical properties. The system studied here is a large section of a full inboard module of an integrated structure comprising the First Wall and Blanket (FW/B) of a Dual Cooled Lithium-Lead (DCLL) energy conversion unit in the Fusion Nuclear Science Facility (FNSF). The structural material is the ferritic/martensitic steel F82H. We analyze several radiation effects phenomena that can lead to significant impact on the mechanical design and lifetime of the structure. These include volumetric swelling effects on the assembly and disassembly of modules and the impact of spatial gradients in neutron damage and helium generation on deformation, stress evolution, and plastic strain accumulation. We show that the stress state is strongly influenced by the accumulation of swelling strains, radiation hardening and softening, and by spatial gradients in displacement damage and helium gas generation. Several key regions in the FW/B structure are identified where severe plastic strains accumulate and may be potential sites for failure, especially during cyclic reactor operations. We finally show that minimum gaps between Inboard (IB) blanket sectors must be present during assembly so as to avoid excessive stress and strain in FW/B modules critical regions and raising chances of failure. A range of structural displacements are shown, from as low as 4 mm at BOL for free side walls to as high as 46 mm at 90 dpa for fully constrained side walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A linked-scale coupled model of mass erosion and redistribution in plasma-exposed micro-foam surfaces

Surface evolution due to exposure to harsh environments is of importance in many scientific and technological applications. In plasma-exposed materials, the surface receives charged particles from the plasma, leading to a series of processes that drive the system far from equilibrium and may lead to the severe deterioration of the surface properties. Although surface morphological changes are driven by atomic collisions taking place over picoseconds and nanometers, these processes result in mass loss and redistribution of matter over much larger length and time scales. This necessitates a multi-scale approach capable of capturing the range of processes linking primary atomic collision events with engineering-level surface geometry changes. In this paper, we develop a computational model to simulate the morphological evolution and effective erosion rate of micro-architected tungsten foams during low-energy plasma ion bombardment. Furthermore, the model acts on several length scales, with the energy and angular dependence of the sputtering yield of flat tungsten surfaces determined using the SRIM code based on the binary collision approximation. This information is introduced into a low-fluence, short-term Monte Carlo raytracing model, and further into a high-fluence, long-term particle transport model. In the latter, material particles representing billions of atoms are described in a digitized 3-D representation of the foam structure from X-ray tomography data, and are sputtered off and redeposited using the atomistic information. We show that the redeposition of sputtered atoms leads to partial self-healing in the bottom layers with a sharp reduction in the sputtering coefficient of low density foams, roughly 25% of the solid W value. This is in qualitative agreement with recent experiments on low porosity W structures. At high fluence, the foam structure degrades considerably as there are fewer ligaments available to recapture sputtered atoms and, consequently, the sputtering rate increases again.

36 MATERIALS SCIENCE↗

Burning Plasma Science: Long Pulse-Materials and Fusion Nuclear Science (Final Project Report)

The series of International Conferences on Fusion Reactor Materials (ICFRM) has been established nearly forty years ago as the major international forum for exchanging and archiving a growing knowledge based on the development of materials for both near and long-term fusion energy systems. The critical role of materials science and engineering in overcoming the technological challenges to making fusion energy a practical reality has been an overarching theme of invited and contributed oral talks as well as the poster session presentations. ICFRM is the premier international forum connecting specialists in the area of development of materials for both near and longer-term fusion energy systems. A central theme is the sharing of new insights, cutting-edge research, and technology in materials science pertaining to the realization of fusion energy. The conference consists of daily overview plenary lectures, invited and contributed oral presentations, and a series of technical poster sessions. In addition to hosted satellite meetings, pre-conference technical tutorials, and stimulating discussions. The 19th International Conference on Fusion Reactor Materials (ICFRM-19) was held in La Jolla, California, U.S.A. during the period October 27 through November 1, 2019. We describe here the conference background, topics, structure, program, schedule and timeline, publications, venue, satellite meetings, short courses and seminars, and finally the budget and expenses.

36 MATERIALS SCIENCE↗

Plasticity of irradiated materials at the nano and micro-scales

Here, we review here our recent work on plastic deformation in irradiated materials at the nano- and micro-scales, as revealed by Discrete Dislocation Dynamics (DDD) simulations. Two methods of including irradiation effects in the DDD framework are presented. The first directly captures the atomistic interaction mechanisms, while the second can effectively study high-dose irradiation. Computer simulations lead to new understanding of the dynamics of collective dislocation-irradiation defect interactions, as well as the quantitative analysis of the temporal and spatial characteristics associated with plastic instabilities. Based on these insights, theoretical models are developed to predict the critical conditions for dislocation channel formation. A simple probability model is proposed and demonstrated to predict the width of dislocation channels in bulk irradiated materials with good agreement with experimental data. The fundamental understanding of the origins of plastic flow localization in irradiated materials sheds light on the design of future generations of radiation-resistant materials.

36 MATERIALS SCIENCE↗

Cluster dynamics modeling of irradiation growth in single crystal Zr

Irradiation growth of single-crystal Zr is modeled with a reduced set of cluster dynamics equations. Nucleation and growth of basal and prismatic dislocation loops are both accounted for in the model. Equations are developed for the time evolution of single point defects, a limited number of point defect clusters, interstitial and vacancy loop nucleation rates, as well as for the growth of vacancy loops on basal planes and interstitial loops on prismatic planes. Reduction of the usual infinite hierarchy of cluster dynamics equations to the simple set studied here is justified on the physical basis of the stability of small loops once nucleated. This simplified cluster dynamics model with a small number of adjustable parameters avoids the complexity of explicit representation of higher order point defect clusters. The model shows consistency with experimental observations of the following aspects: (1) the growth rates of Zr crystals along the a- and c-axes; (2) the onset dose for breakaway irradiation growth; (3) the saturation dislocation loop densities of vacancy and interstitial loops; (4) the effects of cold work and temperature on irradiation growth.

36 MATERIALS SCIENCE↗