Search NASA⌕ Search

Engineering topics

Gillette, R. B.

Publications and source records attributed to Gillette, R. B..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Plasma cleaning device

High vacuum cleaning of contaminated surfaces such as hydrocarbon containment films can be accomplished by a plasma cleaning device which includes a plasma discharge housing to permit generation of a plasma in an environment having a higher pressure than the surface which is to be cleaned. A ground electrode and a radio frequency electrode partially surround a quartz plasma tube, for the introduction of an ionizable gas. These electrodes ionize the gas and help generate the plasma. This plasma flows through a non-constrictive aperture, through the plasma discharge housing and then on to the contaminated surface.

Shannon, R. L.↗
NASA NTRS1975

Development of a laboratory demonstration model active cleaning device

A laboratory demonstration model of a device for removing contaminant films from optical surfaces in space was developed. The development of a plasma tube, which would produce the desired cleaning effects under high vacuum conditions, represented the major problem in the program. This plasma tube development is discussed, and the resulting laboratory demonstration-model device is described.

Shannon, R. L.↗
NASA NTRS1974

Laboratory demonstration model: Active cleaning technique device

The technique which utilizes exposure to a plasma to remove contaminants from a surface was incorporated into a laboratory model which demonstrates active cleaning by both plasma cleaning and ion sputtering modes of operation. The development phase is reported and includes discussion of the plasma tube configuration, device design, and performance tests. A general description of the active cleaning device is provided which includes information on the main power/plasma discharge sensors, and the power, gas supply, and ion accelerator systems. Development of the active cleaning species at high vacuum conditions is described and results indicate that plasma cleaning occurs in the region of a visible plume which extends from the end of the plasma tube. Recommendations are made for research to determine the plasma cleaning mechanism and the plasma species responsible for the cleaning, as well limitations on the type of contaminants that can be removed.

Shannon, R. L.↗
NASA NTRS1973

Increase in transmittance of unbacked aluminum filters exposed to RF or dc discharges in oxygen

Results of an experimental study of the effect of discharges in oxygen on the oxide thickness and transmittance of aluminum filters. The studies were performed by exposing the filters to RF discharges and dc glow discharges in oxygen. In all experiments except one in which an aluminum ring was used as the cathode an increase in the transmittance of the filters is noted. It is thus demonstrated that the transmittance of aluminum filters increases on exposure to electrical discharges in oxygen, although it is not certain whether this phenomenon is caused by atomic oxygen.

Hunter, W. R.↗
NASA NTRS1973

Active cleaning technique for removing contamination from optical surfaces in space

An active cleaning technique for removing contaminants from optical surfaces in space was investigated with emphasis on the feasibility of using plasma exposure as a means of in-situ cleaning. The major work accomplished includes: (1) development of an in-situ reflectometer for use in conjunction with the contaminant film deposition/cleaning facility; (2) completion of Apollo Telescope Mount (ATM) filter treatment experiments to assess the effects of plasma exposure on the UV transmittance; (3) attempts to correlate the atomic oxygen flux with cleaning rate; (4) completion of in-situ butadien contamination/plasma cleaning/UV reflectance measurement experiments; (5) carbon cleaning experiments using various gases; (6) completion of silicone contamination/cleaning experiments; and (7) experiments conducted at low chamber pressures to determine cleaning rate distribution and contamination of surfaces adjacent to those being cleaned.

Shannon, R. L.↗
NASA NTRS1973

Active cleaning technique device

The objective of this program was to develop a laboratory demonstration model of an active cleaning technique (ACT) device. The principle of this device is based primarily on the technique for removing contaminants from optical surfaces. This active cleaning technique involves exposing contaminated surfaces to a plasma containing atomic oxygen or combinations of other reactive gases. The ACT device laboratory demonstration model incorporates, in addition to plasma cleaning, the means to operate the device as an ion source for sputtering experiments. The overall ACT device includes a plasma generation tube, an ion accelerator, a gas supply system, a RF power supply and a high voltage dc power supply.

Shannon, R. L.↗
NASA NTRS1973

Active cleaning techniques for removing contamination from optical surfaces in space

Research in developing an active cleaning technique for removing contaminants from optical surfaces in space is reported. In situ contamination/cleaning experiments were conducted on gold and platimum coated mirrors, which were contaminated by exposure to UV radiation in a 1,3, butadiene environment. Argon and oxygen plasma exposure cleaned the mirrors equally well. Silicone cleaning experiments were also conducted. Exposure of the contaminated mirrors to helium, oxygen, and hydrogen plasmas restored the reflectance at the shorter wavelengths and degraded it at the longer wavelengths.

Shannon, R. L.↗
NASA NTRS1972

Low-temperature oxygen-plasma effects on surveyor plasmo-clay coating

The objective was to determine whether the reflectance of the degraded plasmo-clay thermal control coating could be restored by exposing it to an oxygen plasma. An experiment was conducted to determine whether bulk radiation damage would be removed by a reabsorption of oxygen ions into the pigment crystal lattice. Results show that the oxygen plasma treatment can eliminate some of the lunar environment-induced degradation on the plasmo-clay coating. Visual observations of the lunar soil on the surface after plasma treatment indicated that it was still highly absorbent to light. Therefore, part of the residual discoloration could be due to lunar soil.

Gillette, R. B.↗
NASA NTRS1971

Active cleaning technique for removing contamination from optical surfaces in space

Plasma cleaning experiments were completed on hydrocarbon contaminant films, experiments were initiated to determine a satisfactory technique for depositing contaminant films, and an experiment was conducted to determine whether specimens are being thermally cleaned rather than plasma cleaned. Results of plasma cleaning experiments on hydrocarbon contaminant films showed that the optical properties of mirrors and gratings could be satisfactorily restored. Results on fused silica optical flats were inconclusive because of the insensitivity of measurement techniques to the contaminant films. White thermal control surfaces, degraded by the hydrocarbon contaminant film, could not be restored by oxygen plasma exposure. The reflectance of silvered FEP Teflon thermal control surfaces could be restored by plasma cleaning. Experiments with a silicone contaminant indicated that it could not be easily polymerized onto surfaces with ultraviolet radiation. Results of the thermal cleaning experiment showed that the polymerized hydrocarbon contaminant film could not be removed by heating in vacuum to a temperature in excess of that expected during plasma cleaning.

Gillette, R. B.↗