Search NASA⌕ Search

Engineering topics

Gilmore, M. S.

Publications and source records attributed to Gilmore, M. S..

Long Duration Venus Probes and Landers

Planetary probes have long been a tool used by scientists to gain early clues on environments and systems of new planetary targets. This not only fueled the scientific process but also helped prepare for future missions, such as landers, and helped ensure their success. Venus, Earth's sister planet, has been the target of more probes and landers than any other body in our solar system except for Earth and yet many fundamental questions are unanswered. Challenge for Venus Surface Science: This lack of knowledge is a result of the challenging Venus environments. Remote sensing of the surface and portions of the atmosphere is difficult at best due to the thick layers of sulfuric acid clouds and the high pressure supercritical CO2 atmosphere below those clouds. This has hampered the ability of orbiting missions to provide us insight into surface features and processes and thus hides potential clues on interior process from our view. Surface probes and landers face an even more daunting challenge, which is the extreme temperature, pressure and unfriendly chemical composition of the near surface atmosphere. Over 10 assets have landed on the surface yet the longest surviving asset Venera-13 lasted only 127 minutes before succumbing to the extreme temperature. While this and other landers provided valuable new data, the short life impacted ability to understand any temporal processes, for example meteorology, seismic active, and therefore very little is known about the interior and surface atmosphere interactions. New Capability Offering Potential Solutions: Re-cent developments by NASA are offering hope of overcoming the technical challenges of surface operations and life with the use of high temperature electronics and systems. Wide band gap, SiC based electronics have been demonstrated to function successfully for extended periods of time both at 500C, Venus surface temperatures as well as when temperature is combined with the reactive chemistry of the surface atmosphere and the high pressures (over 90 bar pressure at the surface). In addition to electronics a number of other subsystems are in development including power in the form of high temperature batteries and power management devices, communications including antennas, transmitters and other components, materials, and structures and mechanisms. These are all activities under NASA's Long Lived In situ Solar System Exploration (LLISSE) project. Other activities are also funded under NASA's HOTTech program.

Kremic, T.↗

Generation and Performance of Automated Jarosite Mineral Detectors for Vis/NIR Spectrometers at Mars

Sulfate salt discoveries at the Eagle and Endurance craters in Meridiani Planum by the Mars Exploration Rover Opportunity have proven mineralogically the existence and involvement of water in Mars past. Visible and near infrared spectrometers like the Mars Express OMEGA, the Mars Reconnaissance Orbiter CRISM and the 2009 Mars Science Laboratory Rover cameras are powerful tools for the identification of water-bearing salts and other high priority minerals at Mars. The increasing spectral resolution and rover mission lifetimes represented by these missions currently necessitate data compression in order to ease downlink restrictions. On board data processing techniques can be used to guide the selection, measurement and return of scientifically important data from relevant targets, thus easing bandwidth stress and increasing scientific return. We have developed an automated support vector machine (SVM) detector operating in the visible/near-infrared (VisNIR, 300-2500 nm) spectral range trained to recognize the mineral jarosite (typically KFe3(SO4)2(OH)6), positively identified by the Mossbauer spectrometer at Meridiani Planum. Additional information is included in the original extended abstract.

Gilmore, M. S.↗

Craters as an Indicator of Martian Regolith Thickness

Two craters (D approx.900 m) found in MOC images of Xanthe Terra have concentric terraced morphologies, where one crater lies within a second, larger crater. This type of morphology has been documented on the Moon and attributed to an impact into fragmental material overlying a more competent substrate. These craters offer a mechanism by which to estimate thickness of unconsolidated surface material over large areas on Mars. Such measurements may constrain deflation rates and volume estimates of hydrologic reservoirs on Mars and yield information on the strength of the local bedrock. Additional information is contained in the original extended abstract.

Gilmore, M. S.↗

Magnetometer Data Tests Models for the Origin of the Martian Crustal Dichotomy; Dichotomy Models Constrain Timing of Martian Magnetic Field

Measurements recently supplied by the MGS Magnetometer/Electron Reflectometer (MAG/ER) on MGS can be applied to test theories of the origin of the martian crustal dichotomy. Strong (+/- 1500 nT) magnetic anomalies are observed in the Martian crust. The observations can be summarized as follows: 1) strong crustal magnetic sources are generally confined to the southern highlands, although weaker (approx. 40 nT) anomalies were observed during close periapsis; 2) strong magnetic anomalies are absent in the vicinity of Hellas and Argyre; 3) the anomalies in the region 0 deg to 90 deg S, 120 deg to 240 deg west have a linear geometry, strike generally east west for 1000s km, and show several reversals. This latter point has led to the suggestion that some form of lateral plate tectonics may have been operative in the southern highlands of Mars. These observations have led previous workers to hypothesize that the magnetic anomalies were present prior to and were destroyed by the formation of Hellas and Argyre. As such large impacts are confined to the era of heavy bombardment, this places the time of formation of large magnetic anomalies prior to approx. 3.9 Ga. One obvious extension of this is that the northern lowlands lack significant anomalies because they were erased by impacts and/or the northern lowlands represent crust completely reheated above the Curie temperature. Preliminary observations of the distributions of the large crustal magnetic anomalies show that many of them extend continuously over the highland lowland boundary. This occurs particularly north of the boundary between 30 deg W and 270 deg W, corresponding to northern Arabia, but also occurs in southern Elysium (approx. 10 deg S, 200 deg) and the SW portion of Tharsis (approx. 15 deg S, 140 deg). This suggests that, in these areas, Noachian crust containing the greater than 3.9 Ga magnetic signature, lies beneath the northern highlands. This geometry can be used to test models for the formation of the martian crustal dichotomy. Additional information is contained in the original extended abstract.

Gilmore, M. S.↗

Potential Mars 2001 Sites Coincident with Magnetic Anomalies

Of the areas that meet the engineering criteria for MSP 01, only two are coincident with magnetic anomalies measured by the MAG/ER instrument on MGS. Area A is centered on about 10 deg S, 202 deg W and extends from about 7.5 deg S to 15 S. This area is associated with three bands of magnetic anomalies, two with positive values surrounding an area with negative values. Area B corresponds with a circular high positive magnetic anomaly and is centered at 13.5 deg S, 166 deg W. In addition to magnetic anomalies, the proposed sites have other attributes that make then attractive from of standpoint of meeting the objectives of the Mars Program. The landing site candidates meet the engineering requirements outlined on the Mars '01 landing site page htip://mars.jpl.nasa.gov/2001/landingsite. These are (source of data in parentheses): latitude between 3 deg N and 12 deg S, rock abundance between 5-10% (IRTM), fine-component thermal inertia > 4 cgs units (IRTM), topography < 2.5 km (MOLA). There are three exceptions: 1) Area B contains sites that lie up to about 15 deg S, 2) some sites are considered that have rock abundance values of 3-13%. 3) High resolution Viking coverage may not be available. These exceptions will be noted.

Gilmore, M. S.↗

The formation and evolution of Alpha and Tellus tesserae on Venus

Although tesserae comprise at approximately 10 percent of the surface of Venus, the nature of their formation and evolution is not well understood. One important clue to elucidate this problem is tessera boundaries which are of two types: type 1 are generally embayed by plains; type 2 boundaries are characterized by being linear at the hundred kilometer scale and often associated with steep scarps or tectonic features. Previous study of a distinctive type 2 boundary at Alpha Regio was pursued in order to characterize and assess the implications for this style in general. A model of gravitational relaxation of the tessera block was presented to explain the specific style of type 2 feature seen at western Alpha; however, this model cannot account for the full range of interior structures of Alpha, namely widespread compressional features overprinted by extensional features and volcanism. In order to explain the features of Alpha, we have considered a three-stage model involving (1) mantle downwelling and compression of the lithosphere, (2) delamination of the thickened tessera root, and (3) gravitational relaxation and extension of the tessera plateau. We compare this to the characteristics of Tellus Regio in order to test its broader application.

Gilmore, M. S.↗

Sequential deformation of plains along Tessera boundaries on Venus: Evidence from Alpha Regio

Tesserae are regions of elevated terrain characterized by two or more sets of ridges and grooves that intersect orthogonally. Tesserae comprise 15-20 percent of the surface of Venus, but the nature of their formation and evolution is not well understood; processes proposed to account for their characteristics are many and varied. Two types of tessera boundaries have been described: type 1 are generally embayed by plains; and type 2 boundaries are characterized by being linear at the 100-km scale and often associated with steep scarps or tectonic features. Margins such as the western edge of Alpha have been described as type 2. Some of the tessera have boundaries that display deformation of both the edge of the tessera and the adjoining plains. This study focuses on the western edge of Alpha Regio in an effort to characterize on occurrence of this type of boundary and assess the implications of the style in general. Using Magellan SAR imagery, lineament lengths, orientations, and spacing were measured for ten 50 x 60 km areas spanning 500 km of the western boundary. Structural characteristics and orientations were compared to stratigraphic units in order to assess the sequence and style of deformation.

Gilmore, M. S.↗