Engineering topics

Glarborg, Peter

Publications and source records attributed to Glarborg, Peter.

21 records · Page 2

DOE OSTI2021

Ignition delay times of NH 3 /DME blends at high pressure and low DME fraction: RCM experiments and simulations

Here, autoignition delay times of ammonia/dimethyl ether (NH 3 /DME) mixtures were measured in a rapid compression machine with DME fractions of 0, 2 and 5 and 100% in the fuel. The measurements were performed at equivalence ratios $\varphi$= 0.5, 1.0 and 2.0 and pressures in the range 10–70 bar; depending on the fuel composition, the temperatures after compression varied from 610 K to 1180 K. Admixture of DME is seen to have a dramatic effect on the ignition delay time, effectively shifting the curves of ignition delay vs. temperature to lower temperatures, up to ~250 K compared to pure ammonia. Two-stage ignition is observed at $\varphi$= 1.0 and 2.0 with 2% and 5% DME in the fuel, despite the pressure being higher than that at which pure DME shows two-stage ignition. At $\varphi$= 0.5, a reproducible pre-ignition pressure rise is observed for both DME fractions, which is not observed in the pure fuel components. A novel NH 3 /DME mechanism was developed, including modifications in the NH 3 subset and addition of the NH 2 + CH 3 OCH 3 reaction, with rate coefficients calculated from ab initio theory. Simulations faithfully reproduce the observed pre- ignition pressure rise. While the mechanism also exhibits two-stage ignition for NH 3 /DME mixtures, both qualitative and quantitative improvement is recommended. The overall ignition delay times for ammonia/DME mixtures are predicted well, generally being within 50% of the experimental values, although reduced performance is observed for pure ammonia at $\varphi$= 2.0. Simulating the ignition process, we observe that the DME is oxidized much more rapidly than ammonia. Analysis of the mechanism indicates that this ‘early DME oxidation’ generates reactive species that initiate the oxidation of ammonia, which in turn begins heat release that raises the temperature and accelerates the oxidation process towards ignition. The reaction path analysis shows that the low-temperature chain-branching reactions of DME are important in the early oxidation of the fuel, while the sensitivity analysis indicates that several reactions in the oxidation of DME, including cross reactions between DME and NH 3 species presented here, are critical to ignition, even at fractions of 2% DME in the fuel.

10 SYNTHETIC FUELS↗

DOE OSTI2021

Combustion chemistry in the twenty-first century: Developing theory-informed chemical kinetics models

Over the past 20 to 25 years theoretical chemistry (particularly theoretical chemical kinetics) has played an increasingly important role in developing chemical kinetics models for combustion. Theoretical methods of obtaining rate parameters are now competitive in accuracy with experiment, particularly for small molecules. Moreover, theoretical methods can deal with conditions that experiments frequently cannot. In addition to increased accuracy, theory has rejuvenated methods and discovered phenomena that were completely unappreciated, or at least underappreciated, in the 20th century. Our primary interest here is in molecular-level issues, i.e. in calculating rate and transport parameters. However, dealing with kinetics models that involve thousands of reactions and hundreds of species is important for practical applications and is relatively new to the 21st century. Theory, in a general sense, and theoretical methods development have a role to play here too. We discuss in this review all these topics in some detail with an emphasis on issues and methods that have emerged in the last 20 years or so. Even so, our review is selective, rather than comprehensive, out of necessity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Oxidation of methylamine

A detailed chemical kinetic model for oxidation of methylamine has been developed, based on theoretical work and a critical evaluation of data from the literature. In this work, the rate coefficients for the reactions of CH 3 NH 2 + O 2 → CH 2 NH 2 / CH 3 NH + HO 2 , CH 3 NH 2 + H → CH 3 + NH 3 , CH 3 NH → CH 2 NH 2 , and CH 3 NH + O 2 → CH 2 NH + HO 2 were calculated from ab initio theory. The mechanism was validated against experimental results from batch reactors, flow reactors, shock tubes, and premixed flames. The model predicts satisfactorily explosion limits for CH 3 NH 2 and its oxidation in a flow reactor. However, oxidation in the presence of nitric oxide, which strongly promotes reaction at lower temperatures, is only described qualitatively. Furthermore, calculated flame speeds are higher than reported experimental values; the model does not capture the inhibiting effect of the NH 2 group in CH 3 NH 2 compared to CH 4 . More work is desirable to confirm the products of the CH 3 NH + NO reaction and to look into possible pathways to NH 3 in methylamine oxidation.

10 SYNTHETIC FUELS↗