Search NASA⌕ Search

Engineering topics

Glezakou, Vassiliki-Alexandra

Publications and source records attributed to Glezakou, Vassiliki-Alexandra.

At least 19 records

Pairing a Global Optimization Algorithm with EXAFS to Characterize Lanthanide Structure in Solution

Ensemble-average sampling of structures from ab initio molecular dynamics (AIMD) simulations can be used to predict theoretical extended X-ray absorption fine structure (EXAFS) signals that closely match experimental spectra. However, AIMD simulations are time-consuming and resource-intensive, particularly for solvated lanthanide ions, which often form multiple nonrigid geometries with high coordination numbers. Here, to accelerate the characterization of lanthanide structures in solution, we employed the Northwest Potential Energy Surface Search Engine (NWPEsSe), an adaptive-learning global optimization algorithm, to efficiently screen first-shell structures. As case studies, we examine two systems: Eu(NO 3 ) 3 dissolved in acetonitrile with a terpyridine ligand (terpyNO 2 ), and Nd(NO 3 ) 3 dissolved in acetonitrile. The theoretical spectra for structures identified by NWPEsSe were compared to both experimental and AIMD-derived EXAFS spectra. The NWPEsSe algorithm successfully identified the proper solvation structure for both Eu(NO 3 ) 3 (terpyNO 2 ) and Nd(NO 3 )(acetonitrile) 3 , with the calculated EXAFS signals closely matching the experimental spectra for the Eu-ligand complex and showing good similarity for the Nd salt; the better agreement with the ligand-containing structure is attributed to a less dynamic coordination environment due to the rigid ligand. The key advantage of the global optimization algorithm lies in its ability to sample the coordination environment across the potential energy surface and reduce the time required to identify structures from generally a month to within a week. Additionally, this approach is versatile and can be adapted to characterize main-group metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfonated polybenzimidazole membrane with graphene oxide additive for 2,3-butanediol/water separation: A molecular simulation

Membrane separation for 2,3-butanediol (2,3-BDO) recovery from fermentation broth is highly valued for sustainable and renewable processes, but it requires efficient membrane materials. Here, this work evaluates the sulfonated polybenzimidazole (sPBI) and its graphene oxide (GO) doped composite membrane for separating 2,3-BDO and water via atomistic simulations. Density functional theory calculations are applied to identify various forms of sPBI structures and quantify their binding interactions with 2,3-BDO and water. Classical molecular dynamic simulations are used to evaluate the structural changes, diffusivity, and selectivity of 2,3-BDO and water in different sPBI models, GO surfaces, and GO-doped sPBI composite models. Our results suggest that sPBI slightly increases the crystallinity of the membrane structures, enhances the adsorption strength for both 2,3-BDO and water, and improves the water/2,3-BDO selectivity by 2–3 times. The GO surfaces display a maximum selectivity at a surface coverage of 0.1–0.15 for both hydroxyl and epoxy surface groups. The addition of GO flakes to sPBI creates new interaction sites for 2,3-BDO and water at the interface of sPBI and GO, and the water/2,3-BDO selectivity of GO-doped sPBI models is further increased up to 3 times. This work illustrates how the integrated addition of sPBI and GO flakes offers a promising approach to selective separation of 2,3-BDO and water, providing theoretical guidance for polybenzimidazole-based membranes in the potential application of 2,3-BDO recovery.

2,3-butanediol↗

Molecular Understanding of Nitrogen Oxide Fixation of Water-Lean Carbon Capture Solvents by Atomistic Modeling

Nitrogen oxides, present in flue gas, can cause negative impacts on amine carbon capture solvents by the formation of heat-stable salts and suspected carcinogens. Thus, to maximize the performance of water-lean solvents, a better understanding of this process in these systems is necessary. Here, a computational study for the fixation of the CO 2 capture solvent N-(2-ethoxyethyl)-3-morpholinopropan-1-amine (EEMPA) to nitramine/nitrosamine was conducted. The first step involves the dissociation of the NH bond of EEMPA, in which the homolytic mechanism is energetically more favorable than the heterolytic mechanism. The second step involves radical recombination to form N–N bonds. While NO 2 directly reacts with EEMPA, NO has almost no effect. However, in the presence of O 2 , fixation of EEMPA by NO is enhanced via the formation of N 2 O 4 species. Finally, low reaction energies indicate that the formation of nitramine/nitrosamine may be a reversible process, suggesting that EEMPA could be recovered under thermal stripping conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data Analytics for Catalysis Predictions: Are We Ready Yet?

Catalysis informatics has received tremendous attention in recent years as a tool to design catalysts and discover unique descriptors that capture the relationships between chemical properties and catalytic performance. One of the stop-gaps in understanding catalytic effects, which is often ignored and limits the deployment of data science tools, relates to the lack of uniform data. The catalytic cleavage of C–X (X= H, C, N, and O) bonds is relevant to many fundamental catalytic processes. In this Perspective, we performed data analytics on four groups of C–X cleavage reactions that are common in production, upcycling, or reactive separation: the C–C cleavage in cyclopropyl alcohol, the C–H cleavage in hydroacylation reactions, the C–O cleavage in β-O-4 linkages, and the C–N cleavage in amides, using experimental data collected from the literature to understand their underlying correlations. Experimental variables of high impact are identified for each reaction by dimensionality reduction methods. We highlight the urgent need for experimental data sets that include full details on the reaction conditions, such as reagent concentration, reaction temperature, or time in machine-readable forms. We discuss the potential improvement of the data of these reactions and promising approaches such as autonomous experiments to fill the gaps in unbiased experimental data. Finally, we also address the early stage consideration of separation aspects in the experimental design of efficient catalytic systems for these fundamental examples of chemical reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advances in electrosynthesis for a greener chemical industry

As nations unite to curb anthropogenic greenhouse gas emissions, the decarbonization of the chemical industry has been propelled to the forefront of scientific research. Renewable electricity will play a central role in this effort. In addition to powering chemical plants and allowing for the sustainable production of heat to drive thermocatalytic processes, renewable electricity also provides the chemical industry with opportunities to engage in the sustainability revolution and broadly reduce its environmental footprint through breakthrough innovations in direct electrochemical transformations. The electrification of chemical synthesis—electrosynthesis—is a promising route to promote sustainability without compromising economic competitiveness. Electrosynthesis uses electrons both as an energy source to drive reactions and as a green reagent for chemical reductions and oxidations under ambient conditions. Therefore, it holds tremendous potential (pun intended) to increase selectivity to desired products, open green reaction pathways for challenging transformations (e.g., Birch reduction, epoxidations, coupling reactions), and reduce chemical waste.

08 HYDROGEN↗

Synthesis, Isolation, and Study of Heterobimetallic Uranyl Crown Ether Complexes

Although crown ethers can selectively bind many metal cations, little is known regarding the solution properties of crown ether complexes of the uranyl dication, UO 2 2+ . Here, in this work, the synthesis and characterization of isolable complexes in which the uranyl dication is bound in an 18-crown-6-like moiety are reported. A tailored macrocyclic ligand, templated with a Pt(II) center, captures UO 2 2+ in the crown moiety, as demonstrated by results from single-crystal X-ray diffraction analysis. The U(V) oxidation state becomes accessible at a quite positive potential (E 1/2 ) of –0.18 V vs Fc +/0 upon complexation, representing the most positive U VI /U V potential yet reported for the UO 2 n+ core. Isolation and characterization of the U(V) form of the crown complex are also reported here; there are no prior reports of reduced uranyl crown ether complexes, but U(V) is clearly stabilized by crown chelation. Joint computational studies show that the electronic structure of the U(V) form results in significant weakening of U–O oxo bonding despite the quite positive reduction potential at which this species can be accessed, underscoring that crown-ligated uranyl species could demonstrate unique reactivity under only modestly reducing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Copper Site Redispersion through Atom Trapping in Zeolite Defects

Single-site copper-based catalysts have shown remarkable activity and selectivity for a variety of reactions. However, deactivation by sintering in high-temperature reducing environments remains a challenge and often limits their use due to irreversible structural changes to the catalyst. Here, we report zeolite-based copper catalysts in which copper oxide agglomerates formed after reaction can be repeatedly redispersed back to single sites using an oxidative treatment in air at 550 °C. Under different environments, single-site copper in Cu–Zn–Y/deAlBeta undergoes dynamic changes in structure and oxidation state that can be tuned to promote the formation of key active sites while minimizing deactivation through Cu sintering. For example, single-site Cu 2+ reduces to Cu 1+ after catalyst pretreatment (270 °C, 101 kPa H 2 ) and further to Cu0 nanoparticles under reaction conditions (270–350 °C, 7 kPa EtOH, 94 kPa H 2 ) or accelerated aging (400–450 °C, 101 kPa H 2 ). After regeneration at 550 °C in air, agglomerated CuO was dispersed back to single sites in the presence and absence of Zn and Y, which was verified by imaging, in situ spectroscopy, and catalytic rate measurements. Ab initio molecular dynamics simulations show that solvation of CuO monomers by water facilitates their transport through the zeolite pore, and condensation of the CuO monomer with a fully protonated silanol nest entraps copper and reforms the single-site structure. Importantly, the capability of silanol nests to trap and stabilize copper single sites under oxidizing conditions could extend the use of single-site copper catalysts to a wider variety of reactions and allows for a simple regeneration strategy for copper single-site catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton Relay for the Rate Enhancement of Electrochemical Hydrogen Reactions at Heterogeneous Interfaces

Proton transfer is critically important to many electrocatalytic reactions, and directed proton delivery could open new avenues for the design of electrocatalysts. However, although this approach has been successful in molecular electrocatalysis, proton transfer has not received the same attention in heterogeneous electrocatalyst design. Here, in this work, we report that a metal oxide proton relay can be built within heterogeneous electrocatalyst architectures and improves the kinetics of electrochemical hydrogen evolution and oxidation reactions. The volcano-type relationship between activity enhancement and pK a of amine additives confirms this improvement; we observe maximum rate enhancement when the pK a of a proton relay matches the pH of the electrolyte solution. Density-functional-theory-based reactivity studies reveal a decreased proton transfer energy barrier with a metal oxide proton relay. These findings demonstrate the possibility of controlling the proton delivery and enhancing the reaction kinetics by tuning the chemical properties and structures at heterogeneous interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring NaCl-PuCl 3 molten salts with machine learning interatomic potentials and graph theory

Actinide molten salts are the basis of the liquid fuels used in molten salt reactors. Due to the inherent difficulties associated with high temperature and hazardous conditions, experimental investigations of fundamental properties of these materials are usually challenging. In this work, we describe the structure and transport of NaCl-PuCl 3 mixtures using computational techniques. Three compositions were considered (16, 25, and 36 mol% PuCl 3 ) over a temperature range (730 – 1257K) using ab initio molecular dynamics, which provided the necessary data sets for training machine learned interatomic potentials. Further, molecular dynamics simulations based on these potentials were then used to determine structure and transport properties. A substantial change was noted in the structure factor when increasing the PuCl 3 content from 25 to 36 mol%. This change is linked to the aggregation of larger Pu 3+ clusters. In addition, the similarity of the atomic environments of metal cations in molten salt systems to their solid states counterparts was investigated using an unsupervised learning technique. Finally, graph theory was employed to explore the structure and size of actinide networks. Consistent with the structure factor, a dense Pu 3+ intermolecular structure is observed within the 36 mol% PuCl 3 mixture. The structure of cation-cation inter-junctions is also discussed. In all cases, the diffusion of Pu 3+ is significantly lower than that of Na + and Cl - .

36 MATERIALS SCIENCE↗

Synthesis and thermophysical property determination of NaCl-PuCl3 salts

Currently, a knowledge gap exists in the available data and understanding of thermophysical properties relating to fresh fuel salts, especially those containing plutonium. These data are necessary for designing, constructing, and licensing future commercial molten-salt reactors. Thermophysical properties, such as melting temperature, salt stability, density, and heat capacity were ascertained using NaCl-PuCl3 (36 mol% PuCl3) and a more sodium rich composition containing 25 mol% PuCl3. The NaCl-PuCl3 salt mixture was synthesized for this study and contained 63.4 mol% NaCl, 36.3 mol% PuCl3 and was 99.7% pure. Upon heating, the NaCl–PuCl3 eutectic was stable at temperatures up to 800 °C. The onset of melting occurred at 451 ± 3 °C, and the enthalpy of fusion was determined to be 23.0 ± 1.4 kJ/mol. Heat capacity measurements in the liquid phase ranged from 107.7 to 91.3 J/mol.K, with an average value of 104.6 ± 11.4 J/mol.K between 500 and 650 °C. Three independent trials of the molten NaCl-PuCl3 salt found the density to be ?(T) = 3.8589 – 9.5342·10-4 T(°C). In addition, ab initio molecular dynamic simulations to calculate density and heat capacity values are included.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diamine solvent system for CO 2 capture

Disclosed herein is a method and system for CO 2 removal from a gas stream using a diamine solvent having a Formula I R 1 (R 2 )N-L 1 -NH—R 3 Formula I. With respect to Formula I, each of R 1 and R 2 independently is aliphatic, cycloaliphatic, or R 1 and R 2 together with the nitrogen to which they are attached, form a heterocyclyl ring; L 1 is aliphatic, cycloaliphatic, or L 1 and R 1 together with the nitrogen to which they are attached form a heterocyclyl ring; and R 3 is aliphatic, cycloaliphatic, cycloalkylalkyl, or alkoxyalkyl. And/or the compound may have a viscosity of less than 75 cP at a CO 2 -loading of 40 mol % and at a temperature of 40° C.

Malhotra, Deepika↗

Dynamically Formed Active Sites on Liquid Boron Oxide for Selective Oxidative Dehydrogenation of Propane

Boron-based catalysts have been shown to be both active and selective for driving the oxidative dehydrogenation of propane (ODHP) without the use of precious metals. This reaction occurs at temperatures that melt the oxide catalyst which challenges our ability to identify the liquid structures of the boron oxide phase under reaction conditions, hindering the understanding of its active sites and reaction mechanism. By combining ab initio molecular dynamics simulation, in-situ Raman characterization, and microkinetic modeling, we propose that the di-coordinated boron sites (BO2) in liquid boron oxide are the active species for O2 activation under reaction conditions. The formed peroxy-like species (>B-O-O-B<) can be viewed as a moderate oxidant for ODHP. The dynamical >B-O* dangling bond originated from >B-O-O-B< site as well as the liquid B2O3 structure itself, plays a critical role in the abstraction of H atoms from propane (C3H7 radical formation). Microkinetic modeling reveals C3H7 radical formation to be the main rate controlling step (~75% degree of rate control) with the dehydration of boron hydroxyls (B-OHs) to recover the di-coordinated boron active sites controlling the remainder of the rate (~25% degree of rate control). Moreover, the activation barriers are found to strongly depend upon the surface B-OH concentration. These findings provide significant insights into the active site and reaction mechanisms on boron-based catalysts for ODHP and underlie the importance of understanding the liquid nature of the catalyst to account for the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water–Gas Shift Activity

Research interest in single-atom catalysts (SACs) has been continuously rising. However, the lack of understanding of the dynamic behaviors of SACs during applications hinder catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO 2 -anatase SAC (Pd 1 /TiO 2 ) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in-situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO 2 by H 2 alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H 2 is accompanied by the partial sintering of single Pd atoms (Pd 1 ) into disordered, flat, ~1 nm diameter clusters (Pd n ). The highly active Pd sites in the new coordination environment under H 2 are eliminated by oxidation, which, when performed at high temperature, also re-disperses Pd n and facilitates the reduction of TiO 2 . In contrast, Pd 1 sinters into crystalline, ~5 nm particles (Pd NP ) during CO treatment, deactivating Pd 1 /TiO 2 . During the rWGS reaction, the two Pd evolution pathways co-exist. The activation by H 2 dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar with the ones formed under H 2 . Finally, this work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pre-treatments, and how their activity is modulated by these behaviors. These insights on SAC dynamics and structure-function relationship are valuable to mechanistic understanding and catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-step conversion of ethanol into n-butene-rich olefins over metal catalysts supported on ZrO 2 -SiO 2 mixed oxides

With airlines committed to drastically reduce their carbon footprint by 2050, producing jet fuel from renewable ethanol is of particular interest. Here we reported on an Ag/ZrO 2 /SBA-16 catalyst that is very effective for directly converting ethanol into to n-butene-rich olefins jet fuel precursors (i.e., 88% at full conversion). Here, we report on a Cu/ZrO 2 /SBA-16 catalyst that presents remarkable olefins selectivity (i.e., 89% at 96% conversion) and enhanced stability as compared to Ag/ZrO2/SBA-16 catalyst. Under severe operating conditions a conversion loss < 10% was observed with the Cu/ZrO 2 /SBA-16 catalyst as compared to a 50% loss of conversion with the Ag/ZrO 2 /SBA-16 catalyst. Combined experimental and computational tools revealed that replacing Ag with Cu shifts the reaction pathway of crotonaldehyde hydrogenation from 1,3-butadiene (i.e., coke precursor) production to butyraldehyde formation. Experiments conducted with 4%Cu/4%ZrO 2 supported on SBA-16, dealuminated zeolite Beta, and aluminum silicate revealed the performance and stability advantage of the SBA-16-supported catalyst.

09 BIOMASS FUELS↗