Search NASA⌕ Search

Engineering topics

Gnoffo, P. A.

Publications and source records attributed to Gnoffo, P. A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Team Software Development for Aerothermodynamic and Aerodynamic Analysis and Design

A collaborative approach to software development is described. The approach employs the agile development techniques: project retrospectives, Scrum status meetings, and elements of Extreme Programming to efficiently develop a cohesive and extensible software suite. The software product under development is a fluid dynamics simulator for performing aerodynamic and aerothermodynamic analysis and design. The functionality of the software product is achieved both through the merging, with substantial rewrite, of separate legacy codes and the authorship of new routines. Examples of rapid implementation of new functionality demonstrate the benefits obtained with this agile software development process. The appendix contains a discussion of coding issues encountered while porting legacy Fortran 77 code to Fortran 95, software design principles, and a Fortran 95 coding standard.

Alexandrov, N.↗
NASA NTRS1995

Wake Flow About the Mars Pathfinder Entry Vehicle

A computational approach is used to describe the aerothermodynamics of the Mars Pathfinder vehicle entering the Mars atmosphere at the maximum heating and maximum deceleration points in its trajectory. Ablating and nonablating boundary conditions are developed which produce maximum recombination of CO2 on the surface. For the maximum heating trajectory point, an axisymmetric, nonablating calculation predicts a stagnation-point value for the convective heating of 115 W/cm(exp 2). Radiative heating estimates predict an additional 5-12 W/cm(exp 2) at the stagnation point. Peak convective heating on the afterbody occurs on the vehicle's flat stern with a value of 5.9% of the stagnation value. The forebody flow exhibits chemical nonequilibrium behavior, and the flow is frozen in the near wake. Including ablation injection on the forebody lowers the stagnation-point convective heating 18%.

Mitcheltree, R. A.↗
NASA NTRS1995

Hypersonic Aerodynamic Characteristics of a Proposed Single-Stage-To-Orbit Vehicle

The hypersonic aerodynamic characteristics of a winged body concept representing a candidate single- stage-to-orbit vehicle which features wing tip fin controllers and elevon/body flap control surfa'Fs are predicted at points along a nominal trajectory for Mach numbers from 5 to 27 and angles of attack from 19 to 32 degrees. Predictions are derived from surface properties based on flow solvers for inviscid and viscous, laminar flows acting as a perfect gas, as a gas in chemical equilibrium and as a gas in chemical non- equilibrium. At a Mach number of 22, the lateral aerodynamic characteristics of the vehicle are determined based on an inviscid analysis at side slip angles of 2 and 4 degrees and 32 degrees angle of attack; a viscous analysis was carried out to determine the effect of gas chemistry model on surface pressure and to determine the incremental aerodynamics for control surface deflections. The results show that the longitudinal pitch characteristics of the baseline configuration, i.e., zero control surface deflections, are significantly altered by real gas chemistry at angles of attack greater than 30 degrees and Mach numbers greater than 9; and, that aerodynamics derived from inviscid solutions are of sufficient accuracy for preliminary analysis. Also, it is shown that a Mach number of 22, the choice of gas chemistry model has a large impact on surface pressure levels at highly localized regions on the vehicle and that the vehicle can be trimmed at control surface deflections less than 11 degrees.

Weilmuenster, K. James↗
NASA NTRS1992

Application of program LAURA to perfect gas shock tube flows: A parametric study

The Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) was originally developed to solve steady-flow problems. The desire to validate the algorithm with shock tube experimental data motivated the development of a time-accurate version of the LAURA code. The current work presents a test of the Algorithm. Computational results are compared with the exact solution for a simple shock tube case. The parameters examined are Courant number, relaxation sweeps, grid spacing, and the inviscid relaxation factor. The results of the study indicate that LAURA is capable of producing accurate solutions when appropriate values are used for each parameter.

Mitterer, K. F.↗
NASA NTRS1992

Point-implicit relaxation strategies for viscous, hypersonic flows

An upwind-biased, point-implicit relaxation algorithm for obtaining the numerical solution to the governing equations for 3D, viscous, hypersonic flows in chemical and thermal nonequilibrium is described. The algorithm is derived using a finite-volume formulation in which the inviscid components of flux across cell walls are described with a modified Roe's averaging and Harten's entropy fix with second-order corrections based on Yee's symmetric total variation diminishing scheme. Newton relaxation of the fully coupled equation set is employed on a cell-to-cell basis. Under-relaxation of the inviscid and over-relaxation of the viscous contributions to the residual are implemented. Computational work is easily partitioned among many processors in an asynchronous, dynamic mode for convergence acceleration. An overview of the physical models employed herein for thermochemical nonequilibrium is included. Several test cases and comparisons with experimental data are presented involving hypersonic flow over blunt bodies which illustrate the qualitative and quantitative capabilities of this approach.

Gnoffo, P. A.↗
NASA NTRS1990

Thermochemical nonequilibrium issues for earth reentry of Mars mission vehicles

The thermochemical environment about an axisymmetric 60-deg sphere-cone with a circular aft skirt is computed using the Langley Aerothermodynamic Upwind Relaxation Algorithm. Earth entry at 12 km/sec is examined at 70-km and 80-km altitude for two vehicle base radii of 2 m and 6 m. These four test cases bracket some proposed scenarios for earth reentry of a manned Mars mission aerobrake at this velocity. Thermochemical nonequilibrium results are examined for each case and compared with thermal equilibrium results produced by artificially accelerating vibrational relaxation rates and with equilibrium results produced by a viscous shock layer method.

Mitcheltree, R. A.↗
NASA NTRS1990

Reduced and simplified chemical kinetics for air dissociation using Computational Singular Perturbation

The Computational Singular Perturbation CSP methods is employed (1) in the modeling of a homogeneous isothermal reacting system and (2) in the numerical simulation of the chemical reactions in a hypersonic flowfield. Reduced and simplified mechanisms are constructed. The solutions obtained on the basis of these approximate mechanisms are shown to be in very good agreement with the exact solution based on the full mechanism. Physically meaningful approximations are derived. It is demonstrated that the deduction of these approximations from CSP is independent of the complexity of the problem and requires no intuition or experience in chemical kinetics.

Goussis, D. A.↗
NASA NTRS1987

An aerothermodynamic study of slender conical vehicles

A numerical study was performed to assess the applicability of some current techniques which can be used for aerothermal predictions over slender spherically blunted cones. Predictions using a viscous-shock-layer method and several engineering approaches were compared with experimental results from flight and ground-based tests, with each other, and with other detailed results. Good agreement was obtained in comparisons with laminar and turbulent heating data from the Reentry F flight vehicle and with the wind-tunnel data. In particular, the viscous-shock-layer method was shown to yield excellent comparisons and should be useful in providing detailed flowfield and surface values for slender blunted cones. Additional predictions were obtained with these methods for two 5-deg half-angle cones with different nose radii to illustrate the effects of nose bluntness and angle of attack on drag and heat transfer. These results demonstrate the benefit of nose blunting with respect to heating and drag for laminar and transitional flow at zero-lift conditions and the benefit of heating reduction at angle of attack. Detailed comparison of the engineering code predictions with the viscous-shock-layer results for these additional cases generally showed good agreement except for the laminar prodictions at angle of attack on the forward cone surface. Nonequilibrium calculations at 0-deg angle of attack showed that substantial benefits of low surface catalysis existed only in the nose-dominated region.

Thompson, R. A.↗
NASA NTRS1986

Measured and predicted heating distributions for biconics at Mach 10

Laminar heating distributions have been measured on a 1.9 percent scale model of a generic aeroassisted vehicle taking the shape of a spherically blunted, 13-deg/7-deg biconic whose forecone section is bent upward (by 7 deg) to furnish self-trim capability at a 20-deg angle-of-attack. The results thus obtained were compared with data gathered for a straight biconic. While no Reynolds number effect on heating was noted on the windward side of the forecone, the opposite was true of the leeward side, where a Reynolds number increase caused circumferential flow separation at lower angles of attack. Generally, windward heating was predicted to within 10 percent with a computer code solving the steady, three-dimensional parabolized Navier-Stokes equations.

Miller, C. G.↗
NASA NTRS1986

Three-dimensional AOTV flowfields in chemical nonequilibrium

A technique for upwind differencing of the three-dimensional species continuity equations is presented which permits computation of steady flows in chemical equilibrium and nonequilibrium. The capabilities and shortcomings of the present approach for equilibrium and nonequilibrium flows is discussed. Modifications now being investigated to improve computational time are outlined.

Gnoffo, P. A.↗
NASA NTRS1986

Application of program LAURA to three-dimensional AOTV flowfields

Program LAURA (Langley Aerothermodynamic Upwind Relaxation Algorithm) is a robust, finite volume, single-level storage, implicit upwind differencing algorithm which has been documented and tested on several three-dimensional blunt-body flows. The algorithm can run at unlimited Courant numbers (relaxing the steady-state equations) but requires the inversion of only a 5 x 5 matrix per computational cell. An alternating directional sweep Gauss-Seidel substitution strategy is used to relax the governing equations. At present, the Euler and thin-layer Navier-Stokes equations using Sutherland's law for viscosity have been modeled for a perfect gas, equilibrium air, and nonequilibrium air chemistry neglecting diffusion. The equilibrium and nonequilibrium air chemistry options have been described in a companion paper. Good comparisons with experimental data and another calculation method for pressure distributions, aerodynamic coefficients, and heat-transfer distributions have been demonstrated for three-dimensional blunt-body flows.

Gnoffo, P. A.↗
NASA NTRS1985

Measured and predicted vortex-induced leeward heating on a biconic at Mach 6 and 10

Detailed longitudinal and circumferential heating distributions were measured on a spherically blunted, 13 deg/7 deg biconic at angles of attack from 0 deg to 27 deg. The measurements were made in the Langley 20-inch Mach 6 tunnel and 31-inch Mach 10 tunnel to provide heating distributions at Mach 6 and 10 in air. The free-stream Reynolds number based on model length varied from 0.4 to 4.8 million at Mach 6 and 0.3 to 1.3 million at Mach 10. The basic trends in leeward heating are found to be described by a single parameter, the viscous interaction parameter. A decrease in this parameter results in a decrease in leeward heating for attached flow, an increase in heating for separated flow, and a forward movement of the separation region. The parabolized Navier-Stokes code for laminar flow qualitatively predicted the longitudinal and circumferential heating distributions.

Miller, C. G.↗
NASA NTRS1984

Complete flowfields over low and wide angle AOTV conceptual configurations

Flowfields over two conceptual aeroassisted orbital transfer vehicles, a moderate lift-to-drag ratio biconic, and an axisymmetric zero lift aerobrake are investigated. The solution procedures employ a compressible Navier-Stokes time-asymptotic technique for blunt body flow and a Parabolized Navier-Stokes spatial marching technique for the primarily supersonic shock layer flow over low-angle bodies. Emphasis is placed on the laminar convective heating predictions and comparisons to experimental data where available. Code robustness and solution times are discussed and guidelines are given for the specification of various numerical parameters. The Parabolized Navier-Stokes technique has a high probability of solution success for the range of applications considered herein, and very good comparisons with experimental heat-transfer data have been obtained. The blunt body Navier-Stokes code is more sensitive to parameter specification for the aerobrake calculations. Still, coarse grid solutions can be obtained quickly to get a good first cut at flowfield definition. Fair to good comparisons have been obtained between experimental heating and pressure data and coarse and fine grid solutions.

Gnoffo, P. A.↗
NASA NTRS1984

Experimental heating distributions for biconics at incidence in Mach 10 air and comparison to prediction

Heating distributions were measured on a 1.9 percent scale model of a generic, aeroassisted vehicle proposed for missions to a number of planets and also a candidate as a moderate L/D earth orbital transfer vehicle. This vehicle is a spherically blunted, 13 deg/7 deg biconic with the fore-cone bent upward 7 deg to provide self-trim capability; also tested was a straight biconic with the same noise radius and half angles. These measurements were made in the Langley 31-Inch Mach 10 Tunnel at values of the free-stream Reynolds number, based on model length, equal to 0.2 and 0.9 million. The angle of attack, referenced to the aft cone, was varied from 0 to 20 deg. Heating distributions predicted with a parabolized Navier Stokes (PNS) code are compared to measurement over the present range of Reynolds number and angle of attack. Windward heating was predicted to within 10 percent by the PNS code. Leeward heating distributions were predicted qualitatively for both values of Reynolds number, but quantitative agreement was poorer than on the windward side.

Miller, C. G.↗
NASA NTRS1984

Laminar heat-transfer distributions on biconics at incidence in hypersonic-hypervelocity flows

Laminar heating distributions were measured at hypersonic-hypervelocity flow conditions on a 1.9-percent-scale model of an aeroassisted vehiclee proposed for missions to a number of planets. This vehicle is a spherically blunted, 12.84/7deg biconic with the fore-cone axis bent upward 7 deg relative to the aft-cone axis to provide selftrim capability. Also tested was a straight biconic (i.e., without nose bend) with the same nose radius and half-angles as the bent-nose biconic. These measurements were made in the Langley Expansion Tube at free-stream velocities from 4.5 to 6.9 km/sec and Mach numbers from 6.0 to 9.0 with helium, nitrogen, air, and carbon dioxide test gases. The range of calculated thermochemical equilibrium normal-shock density ratios for these four test gases was 4 to 19. Angles of attack, referenced to the aft-cone, varied from 0 to 20 deg. Heating distributions predicted with a parabolized Navier-Stokes (PNS) code were compared with measurement for helium and air test gases. Measured windward and leeward heating levels were generally underpredicted by the PNS code for both test gases, and agreement was poorer on the leeward side than on the windward side.

Miller, C. G., III↗