Search NASA⌕ Search

Engineering topics

Goddard, III, William A.

Publications and source records attributed to Goddard, III, William A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Construction of a Pt‐CeO x Interface for the Electrocatalytic Hydrogen Evolution Reaction

Abstract The creation of metal‐metal oxide interfaces is an important approach to fine‐tuning catalyst properties through strong interfacial interactions. This article presents the work on developing interfaces between Pt and CeO x that improve Pt surface energetics for the hydrogen evolution reaction (HER) within an alkaline electrolyte. The Pt‐CeO x interfaces are formed by depositing size‐controlled Pt nanoparticles onto a carbon support already coated with ultrathin CeO x nanosheets. This interface structure facilitates substantial electron transfer from Pt to CeO x , resulting in decreased hydrogen binding energies on Pt surfaces, and water dissociation for the HER, as predicted by the density functional theory (DFT) calculations. Electrochemical testing indicates that both Pt specific activity and mass activity are improved by a factor of 2 to 3 following the formation of Pt‐CeO x interfaces. This study underscores the significance and potential of harnessing robust interfacial effects to enhance electrocatalytic reactions.

25 ENERGY STORAGE↗
DOE OSTI2024

2D Metal/Graphene and 2D Metal/Graphene/Metal Systems for Electrocatalytic Conversion of CO 2 to Formic Acid

Abstract Efficiently transforming CO 2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non‐toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO 2 (CO 2 RR) on conventional carbon black‐supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp , , and orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO 2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p‐block elements.

Cho, Jinwon↗
DOE OSTI2024

Graphene-supported single atom catalysts for high performance lithium-oxygen batteries

The optimal choice of d-block metals in single atom catalysts (SACs) is crucial for designing efficient electrocatalysts for activating the Oxygen reduction reaction (ORR)/ Oxygen evolution reaction (OER) in lithiumoxygen batteries (LOBs). Herein, we used the Quantum Mechanics methods to understand the origin of reactivity for a series of 16 d-block metals supported on nitrogen-doped graphene as SACs for ORR and OER in LOBs. Based on the Gibbs free energy calculations, we found that among the 16 SACs investigated, Zn-SAC exhibits the highest electrochemical activity with the lowest overpotential of 0.17 V. Here we then used machine learning (ML) to develop an intrinsic descriptor, phi, that correlates the catalytic activity with electronic and chemical properties of the catalytic centers at the M-N 4 active site on graphene surface. We established a linear relationship between phi and the catalytic activity that provides guidance for designing efficient SACs for electrocatalysis in LOBs. To validate these predictions, we report electrochemical measurements showing that Zn-SAC exhibits an ultra-stable cyclability with reduced overpotentials over Mo-SAC and nitrogen-doped graphene (NG), confirming our theoretical prediction. This fundamental work provides a deep understanding on the rational design of efficient SACs for OER/ ORR in LOBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Modular Functionalization of Metal‐Organic Frameworks for Nitrogen Recovery from Fresh Urine**

Abstract Nitrogen recovery from wastewater represents a sustainable route to recycle reactive nitrogen (Nr). It can reduce the demand of producing Nr from the energy‐extensive Haber‐Bosch process and lower the risk of causing eutrophication simultaneously. In this aspect, source‐separated fresh urine is an ideal source for nitrogen recovery given its ubiquity and high nitrogen contents. However, current techniques for nitrogen recovery from fresh urine require high energy input and are of low efficiencies because the recovery target, urea, is a challenge to separate. In this work, we developed a novel fresh urine nitrogen recovery treatment process based on modular functionalized metal–organic frameworks (MOFs). Specifically, we employed three distinct modification methods to MOF‐808 and developed robust functional materials for urea hydrolysis, ammonium adsorption, and ammonia monitoring. By integrating these functional materials into our newly developed nitrogen recovery treatment process, we achieved an average of 75 % total nitrogen reduction and 45 % nitrogen recovery with a 30‐minute treatment of synthetic fresh urine. The nitrogen recovery process developed in this work can serve as a sustainable and efficient nutrient management that is suitable for decentralized wastewater treatment. This work also provides a new perspective of implementing versatile advanced materials for water and wastewater treatment.

Guo, Lei↗
DOE OSTI2023

Nanocluster superstructures assembled via surface ligand switching at high temperature

Superstructures with nanoscale building blocks, when coupled with precise control of the constituent units, open opportunities in rationally designing and manufacturing desired functional materials. Yet, synthetic strategies for the large-scale production of superstructures are scarce. We report a scalable and generalized approach to synthesizing superstructures assembled from atomically precise Ce24O28(OH)8 and other rare-earth metal-oxide nanoclusters alongside a detailed description of the self-assembly mechanism. Combining operando small-angle X-ray scattering, ex situ molecular and structural characterizations, and molecular dynamics simulations indicates that a high-temperature ligand-switching mechanism, from oleate to benzoate, governs the formation of the nanocluster assembly. The chemical tuning of surface ligands controls superstructure disassembly and reassembly, and furthermore, enables the synthesis of multicomponent superstructures. Here, this synthetic approach, and the accurate mechanistic understanding, are promising for the preparation of superstructures for use in electronics, plasmonics, magnetics and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Topology induced crossover between Langevin, subdiffusion, and Brownian diffusion regimes in supercooled water

Despite extensive studies of supercooled water, it remains challenging to understand its peculiar dynamic anomalous properties. In this work, we integrated full atomistic simulations of supercooled water over the temperature range of room temperature to 200 K using a quantum-mechanics-based polarizable force field with the dressed dynamics method that couples fast collision events and slow reorganization dynamics of hydrogen-bond networks. Our analysis unveils the salient multiscale features in the transient relaxation dynamics of supercooled water. A classical Langevin behavior dominates at fast timescales, while long-time relaxations unveil two different activation barriers in two temperature regions: below and above 230 K. The modulation of the entropy spectrum by temperature is elucidated in terms of a three-state model underlined by the complexity of the water dynamics associated with a topological transition of a strong hydrogen-bond network. This state-dependent network topology is quantitatively characterized by power-law exponents of inverse network connectivity from 200 to 298 K. Finally, this work provides valuable guidance for further studies on the transient relaxation dynamics of supercooled water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In situ x-ray absorption investigations of a heterogenized molecular catalyst and its interaction with a carbon nanotube support

A highly active heterogenized molecular CO 2 reduction catalyst on a conductive carbon support is investigated to identify if its improved catalytic activity can be attributed to strong electronic interactions between catalyst and support. The molecular structure and electronic character of a [Re +1 (tBu-bpy)(CO) 3 Cl] (tBu-bpy = 4,4'-tert-butyl-2,2'-bipyridine) catalyst deposited on multiwalled carbon nanotubes are characterized using Re L 3 -edge x-ray absorption spectroscopy under electrochemical conditions and compared to the homogeneous catalyst. The Re oxidation state is characterized from the near-edge absorption region, while structural changes of the catalyst are assessed from the extended x-ray absorption fine structure under reducing conditions. Chloride ligand dissociation and a Re-centered reduction are both observed under applied reducing potential. The results confirm weak coupling of [Re(tBu-bpy)(CO) 3 Cl] with the support, since the supported catalyst exhibits the same oxidation changes as the homogeneous case. However, these results do not preclude strong interactions between a reduced catalyst intermediate and the support, preliminarily investigated here using quantum mechanical calculations. Thus, our results suggest that complicated linkage schemes and strong electronic interactions with the initial catalyst species are not required to improve the activity of heterogenized molecular catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Single and dual metal atom catalysts for enhanced singlet oxygen generation and oxygen reduction reaction

We demonstrate rational design of graphene-supported single and dual metal atom catalysts (SACs and DACs) for photocatalytic applications, such as singlet oxygen ( 1 O 2 ) sensitization and H 2 O 2 production. Here we combine density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations with experimental verifications. We found a synergistic effect between triplet sensitization and triplet–triplet (Dexter) energy transfer; both play a role in the photocatalytic activity through the volcano plot of 3d transition metal SACs. More specifically, FeN 4 -SAC exhibits a low ISC energy gap (ΔE ISC ) of 0.039 eV, compared with 0.108 eV for FeNiN8-DACs, both possessing a high Bader charge transfer of 0.366 e- and 0.405 e-, respectively. Guided by these computational results, we synthesized a series of SACs and a DAC and confirmed their structures with scanning transmission electron microscopy (STEM) along with the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). We then confirm their band structures with low-energy inverse photoemission spectroscopy (LEIPS) and UV-vis-NIR. Subsequently, we synthesized the catalysts for the photooxygenation of anthracene and two-electron oxygen reduction reaction (ORR) to measure their photocatalytic activity. We found that H 2 O 2 production through the two-electron ORR competes with the 1 O 2 generation through Dexter energy transfer. FeN 4 -SAC demonstrates a high photooxygenation conversion of 86% and a high 1 O 2 quantum yield of 1.04, obtained from electron spin resonance (ESR) spectroscopy, with low H 2 O 2 production. In contrast, NiN 4 -SAC exhibits a low 1 O 2 generation and a high H 2 O 2 production mainly because of the high Gibbs free energy of the OOH* intermediate. In conclusion, this work proposes an effective DFT-guided strategy for designing SACs and DACs for various photocatalytic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reaction mechanism and kinetics for N 2 reduction to ammonia on the Fe–Ru based dual-atom catalyst

Environmental and energy considerations demand that the Haber-Bosch process for reducing N 2 to NH 3 be replaced with electrochemical ammonia synthesis where the H atoms come from water instead of from H 2 . But a practical realization of electrochemical N 2 reduction reaction (NRR) requires the development of new generation electrocatalysts with low overpotential and high Faraday efficiency (FE). A major problem here is that the hydrogen evolution reaction (HER) competes with NRR. Herein, we consider new generation dual-site catalysts involving two different metals incorporated into a novel two-dimensional C 3 N–C 2 N heterostructure that provides a high concentration of well-defined but isolated active sites that bind two distinct metal atoms in a framework that facilitates electron transfer. We report here the mechanism and predicted kinetics as a function of applied potential for both NRR and HER for the (Fe–Ru)/C 3 N–C 2 N dual atom catalyst. These calculations employ the grand canonical potential kinetics (GCP-K) methodology to predict reaction free energies and reaction barriers as a function of applied potential. The rates are then used in a microkinetic model to predict the turn-over-frequencies (TOF) as a function of applied potential. At U = 0 V, the FE for NRR is 93%, but the current is only 2.0 mA cm –2 . The onset potential (at 10 mA cm –2 ) for ammonia on Fe–Ru/C 3 N–C 2 N is –0.22 V RHE . This leads to a calculated TOF of 434 h –1 per Fe–Ru site. In conclusion, we expect that the mechanisms for NRR and HER developed here will help lead to new generations of NRR with high TOF and FE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-throughput screening to predict highly active dual-atom catalysts for electrocatalytic reduction of nitrate to ammonia

Ammonia is an essential chemical owing to its importance in fertilizer production and other industrial applications. Electrocatalytic nitrate reduction to ammonia (NO 3 RR) holds great promise for low-temperature ammonia production while simultaneously addressing nitrate-based environmental concerns. To provide the mechanistic understanding needed to design an effective electrocatalyst, we systematically investigated the catalytic performance of metal-based dual-atom catalysts (DACs) anchored on two-dimensional (2D) expanded phthalocyanine (Pc) for NO 3 RR. We found that NO 3 RR can efficiently produce ammonia on Cr 2 -Pc, V 2 -Pc, Ti 2 -Pc, and Mn 2 -Pc surfaces with low limiting potentials of – 0.02, – 0.25, – 0.34, and – 0.41 V RHE , respectively. Moreover, using the free energy difference of *NO 3 - and *H as a descriptor, we found that the hydrogen evolution reaction is significantly suppressed on the DAC surface due to an ensemble effect in which the two metal atoms cooperate to selectively form ammonia. We performed high-throughput screening to develop an efficient metal-based DAC for NO 3 - reduction, followed by a mechanistic study to elucidate the NO3RR pathway on the DAC. Finally, this work provides design information for advancing sustainable ammonia synthesis under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determining the hydronium pKα at platinum surfaces and the effect on pH-dependent hydrogen evolution reaction kinetics

Electrocatalytic hydrogen evolution reaction (HER) is critical for green hydrogen generation and exhibits distinct pH-dependent kinetics that have been elusive to understand. A molecular-level understanding of the electrochemical interfaces is essential for developing more efficient electrochemical processes. Here we exploit an exclusively surface-specific electrical transport spectroscopy (ETS) approach to probe the Pt-surface water protonation status and experimentally determine the surface hydronium pK a = 4.3. Quantum mechanics (QM) and reactive dynamics using a reactive force field (ReaxFF) molecular dynamics (RMD) calculations confirm the enrichment of hydroniums (H 3 O + * ) near Pt surface and predict a surface hydronium pK a of 2.5 to 4.4, corroborating the experimental results. Importantly, the observed Pt-surface hydronium pK a correlates well with the pH-dependent HER kinetics, with the protonated surface state at lower pH favoring fast Tafel kinetics with a Tafel slope of 30 mV per decade and the deprotonated surface state at higher pH following Volmer-step limited kinetics with a much higher Tafel slope of 120 mV per decade, offering a robust and precise interpretation of the pH-dependent HER kinetics. These insights may help design improved electrocatalysts for renewable energy conversion.

Zhong, Guangyan↗
DOE OSTI2022

Machine learning for design principles for single atom catalysts towards electrochemical reactions

Machine learning (ML) integrated density functional theory (DFT) calculations have recently been used to accelerate the design and discovery of heterogeneous catalysts such as single atom catalysts (SACs) through the establishment of deep structure–activity relationships. Here, this review provides recent progress in the ML-aided rational design of heterogeneous catalysts with the focus on SACs in terms of structure–activity relationships, feature importance analysis, high-throughput screening, stability, and metal–support interactions for electrochemistry. Support vector machine (SVM), random forest regression (RFR), and deep neural networks (DNN) along with atomic properties are mainly used for the design of SACs. The ML results have shown that the number of electrons in the d orbital, oxide formation enthalpy, ionization energy, Bader charge, d-band center, and enthalpy of vaporization are mainly the most important parameters for the defining of the structure–activity relationships for electrochemistry. However, the black-box nature of ML techniques occasionally makes a physical interpretation of descriptors, such as the Bader charge, d-band center, and enthalpy of vaporization, non-trivial. At the current stage, ML application is limited by the lack of a large and high-quality database. Future prospects for the development of a large database and a generalized ML algorithm for SAC design are discussed to give insights for further studies in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗