Search NASA⌕ Search

Engineering topics

Goetz, R. C.

Publications and source records attributed to Goetz, R. C..

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Capabilities and applications of a computer program system for dynamic loads analyses of flexible airplanes with active controls /DYLOFLEX/

This paper describes and illustrates the capabilities of the DYLOFLEX Computer Program System. DYLOFLEX is an integrated system of computer programs for calculating dynamic loads of flexible airplanes with active control systems. A brief discussion of the engineering formulation for each of the nine DYLOFLEX programs is described. The capabilities of the system are illustrated by the analyses of two example configurations.

Perry, B., III↗
NASA NTRS1979

NASA/FAA general aviation crash dynamics program - A status report

The objective of the Langley Research Center general aviation crash dynamics program is to develop technology for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: controlled full-scale crash testing, nonlinear structural analyses to predict large deflection elasto-plastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and complex computerized procedures for predicting airframe response. These analyses are being developed to provide designers with methods for predicting accelerations, loads, and displacements of collapsing structure. Tests on typical full-scale aircraft and on full- and sub-scale structural components are being performed to verify the analyses and to demonstrate load attenuating concepts.

Thomson, R. G.↗
NASA NTRS1979

Research needs in aerospace structural dynamics

The perspective of a NASA Ad Hoc Study Committee on future research needs in structural dynamics within the aerospace industry is presented. It identifies the common aspects of the design process across the industry and establishes the role of structural dynamics in it through a discussion of various design considerations having their basis in structural dynamics. The specific structural dynamics issues involved in these considerations are identified and assessed as to their current technological status and trends. Projections of future requirements based on this assessment are made and areas of research to meet them are identified.

Amos, A. K.↗
NASA NTRS1978

Synthesis of aircraft structures using integrated design and analysis methods

A systematic research is reported to develop and validate methods for structural sizing of an airframe designed with the use of composite materials and active controls. This research program includes procedures for computing aeroelastic loads, static and dynamic aeroelasticity, analysis and synthesis of active controls, and optimization techniques. Development of the methods is concerned with the most effective ways of integrating and sequencing the procedures in order to generate structural sizing and the associated active control system, which is optimal with respect to a given merit function constrained by strength and aeroelasticity requirements.

Sobieszczanski-Sobieski, J.↗
NASA NTRS1976

Loads technology for supersonic cruise aircraft

A flight program to measure atmospheric turbulence at high altitudes (long wavelengths) in a variety of meteorological conditions is described and some results obtained in high altitude wind shear are discussed. Results are also presented from wind tunnel test programs to measure fluctuating pressures associated with over-the-wing configurations. A flexible aircraft take off and landing analysis and an active control landing gear analysis, are developed and their capabilities are described. Efforts to validate these analyses with experimental data are also discussed as well as results obtained from parametric studies.

Goetz, R. C.↗
NASA NTRS1974

Some effects of tip fins on wing flutter characteristics

A wind tunnel investigation has been conducted over the Mach number range from about 0.6 to 1.2 to determine the effects of large tip fins on the flutter characteristics of a swept wing. The basic wing configuration had an aspect ratio of 0.95, leading-edge sweep of 40 deg 0, and trailing-edge sweep of 21 deg. Two of these configurations were modified with tip fins of 60 deg dihedral and had effective aspect ratios of 1.5 and 2.2. In general, the results indicate that the addition of tip fins reduces the flutter speed, with the larger fin having the greater effect. Comparison of the experimental flutter speeds at Mach numbers between 0.60 and 0.90 with calculated values obtained by using doublet-lattice unsteady aerodynamic theory was good. Analytical results where structural and aerodynamic effects of the tip fins were isolated indicated that the reduction in flutter speed produced by the addition of the fins was caused by both effects, with the structural effect being the more pronounced.

Goetz, R. C.↗
NASA NTRS1972

Flutter technology for space shuttle

The development of analytical and experimental techniques needed to predict space shuttle flutter boundaries and insure adequate flutter margins and anticipated problems associated with aeroelastic-model and full-scale testing to validate flutter clearance are considered. Results illustrating the best available tools for subsonic and supersonic flutter prediction are presented. Programs currently underway which will help overcome the difficult problems envisioned for the transonic wind-tunnel and flight flutter test program are also discussed.

Goetz, R. C.↗
NASA NTRS1972

Space Shuttle - A new arena for the structural dynamicists.

The Space Shuttle represents the focus of NASA development endeavors for the next decade. The purpose of the shuttle is to provide a general launch capability for a variety of payloads ranging in weight to as high as 65,000 pounds. This paper concentrates on one aspect of the shuttle development, namely, dynamics and aeroelasticity. The objective of our research during the first year of activity has been directed at searching out problems peculiar to the Space Shuttle, reviewing the state of the art, and developing a program to satisfy the needs. Some of the specific items covered in this paper are vibration modes, thermal protection system dynamics, fluid dynamics, ground winds, flutter, buffet, and noise.

Runyan, H. L.↗