Search NASA⌕ Search

Engineering topics

Goldberger, Joshua E.

Publications and source records attributed to Goldberger, Joshua E..

At least 19 records

Emergence of exchange bias in van der Waals magnetic alloy CrxPt1−xTe2

Abstract Cr x Pt 1− x Te 2 is a recently developed van der Waals magnetic alloy noted for its stability under ambient conditions. Here, we report the emergence of an exchange bias effect in Cr x Pt 1− x Te 2 , without typical exchange bias sources such as an adjacent antiferromagnetic layer. We find that the exchange bias is present for x = 0.45 and absent for x = 0.35, which is correlated to the presence of a Cr modulation where the Cr concentration alternates each vdW layer (modulation period of 2 layers) for x ≥ 0.4. We perform Monte Carlo simulations utilizing exchange parameters from first-principles calculations, which recreate the exchange bias in hysteresis loops of Cr 0.45 Pt 0.55 Te 2 . From our simulations, we infer the source of exchange bias to be magnetic moments locked into free energy minima that resist magnetization reversal. This work presents a way to introduce desirable magnetic properties to van der Waals magnets.

Bailey-Crandell, Ryan↗

Quantum octets in high mobility pentagonal two-dimensional PdSe 2

Two-dimensional (2D) materials have drawn immense interests in scientific and technological communities, owing to their extraordinary properties and their tunability by gating, proximity, strain and external fields. For electronic applications, an ideal 2D material would have high mobility, air stability, sizable band gap, and be compatible with large scale synthesis. Here we demonstrate air stable field effect transistors using atomically thin few-layer PdSe 2 sheets that are sandwiched between hexagonal BN (hBN), with large saturation current > 350 μA/μm, and high field effect mobilities of ~ 700 and 10,000 cm 2 /Vs at 300 K and 2 K, respectively. At low temperatures, magnetotransport studies reveal unique octets in quantum oscillations that persist at all densities, arising from 2-fold spin and 4-fold valley degeneracies, which can be broken by in-plane and out-of-plane magnetic fields toward quantum Hall spin and orbital ferromagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergizing a Large Ordinary Nernst Effect and Axis‐Dependent Conduction Polarity in Flat Band KMgBi Crystals

The exploration of quantum materials in which an applied thermo/electrical/magnetic field along one crystallographic direction produces an anisotropic response has led to unique functionalities. Along these lines, KMgBi is a layered, narrow gap semiconductor near a critical state between multiple Dirac phases due to the presence of a flat band near the Fermi level. The valence band is highly anisotropic with minimal cross-plane dispersion, which, in combination with an isotropic conduction band, enables axis-dependent conduction polarity. Thermopower and Hall measurements indicate dominant p-type conduction along the cross-plane direction, and n-type conduction along the in-plane direction, leading to a significant zero-field transverse thermoelectric response when the heat flux is at an angle to the principal crystallographic directions. Additionally, a large Ordinary Nernst effect (ONE) is observed with an applied field. It arises from the ambipolar term in the Nernst effect, whereby the Lorentz force on electrons and holes makes them drift in opposite directions so that the resulting Nernst voltage becomes a function of the difference between their partial thermopowers, greatly enhancing the ONE. It is proven that axis-dependent polarity can synergistically enhance the ONE, in addition to leading to a zero-field transverse thermoelectric performance.

36 MATERIALS SCIENCE↗

Axis dependent conduction polarity in the air-stable semiconductor, PdSe 2

Axis-dependent conduction polarity (ADCP) is a unique electronic phenomena in which the charge polarity of carrier conduction can differ from p-type to n-type depending on the direction of travel through the crystal. Most materials that exhibit ADCP are metals, and very few semiconducting materials exhibit this effect. Here, in this work, we establish that PdSe 2 , a ~0.5 eV band gap semiconductor that is air- and water-stable, exhibits ADCP, through the growth and characterization of the transport properties of crystals with extrinsic p- and n-type doping levels of Ir and Sb, respectively, in the 10 16 –10 18 cm –3 range. Electron doped PdSe 2 exhibits p-type conduction in the cross-plane direction and n-type conduction along the in-plane directions above an onset temperature of 100–200 K that varies with doping level. Lightly p-doped samples show p-type thermopower in all directions at low temperatures, but above ~360 K the in-plane thermopower turns negative. Density functional theory calculations indicate that the origin of ADCP arises from the complementary effective mass anisotropies in the valence and conduction bands in this material, which facilitate hole transport in the cross-plane direction, and electron transport along the in-plane directions. ADCP occurs at temperatures with sufficient thermal population of both carrier types to overcome the extrinsic doping levels to exploit the effective mass anisotropy. In total, the development of this stable semiconductor in which thermally or optically excited holes and electrons inherently migrate along different directions opens up numerous potential applications in a multitude of technologies.

36 MATERIALS SCIENCE↗

Adiabatic and isothermal configurations for Re 4 Si 7 transverse thermoelectric power generators

We report that transverse thermoelectric generators (TTEGs) have the potential to overcome two challenging problems that limit the commercial application of classical thermoelectric generators (TEGs): the significant irreversible efficiency losses in the contacts and the thermal degradation of the contacts at the hot end. TTEGs are built from a single material that can generate a thermoelectric current in a direction that is orthogonal to a temperature gradient. They only require a single set of contacts that are displaced away from the hot end. Here, we experimentally explore the device design considerations for optimizing the performance of this far less explored class of thermal-to-electric generation devices. We fabricate Re 4 Si 7 TTEGs and show that there is no measurable loss in efficiency with a single set of contacts that are midway between the hot and cold ends. We show that a new effect must be considered: the appearance of transverse thermal gradients that lead to significant differences between the performance of TTEGs implemented in isothermal and adiabatic geometries. The isothermal TTEG configuration leads to much higher device efficiencies. Overall, this work highlights how different the design of TTEGs is from that of conventional TEGs and the importance of controlling the device geometry for optimum waste heat recovery.

30 DIRECT ENERGY CONVERSION↗

Computationally Guided Discovery of Axis-Dependent Conduction Polarity in NaSnAs Crystals

Most electronic materials exhibit a single dominant charge carrier type, either holes or electrons, along all crystallographic directions. However, there are a small number of compounds, mostly metals, that exhibit simultaneous p-type and n-type conduction behavior along different crystallographic directions. We demonstrate that the experimental discovery of semiconductors with this axis-dependent conduction polarity can be facilitated by identifying a large anisotropy of either the electron or hole effective masses (m*) or both, providing the electron and hole masses dominate along different crystallographic directions. We calculated the layered semiconductor NaSnAs to have a lower electron m* in-plane than the cross-plane and a very large hole m* in-plane and small hole m* cross-plane. We established the growth of >3 mm-sized NaSnAs crystals via Sn flux and confirmed the band gap to be 0.65 eV, in agreement with theory. NaSnAs exhibits p-type thermopowers cross-plane and n-type thermopowers in-plane, confirming that the large anisotropy in the effective mass at the band edges is an excellent indicator for axis-dependent conduction polarity. Altogether, this work shows that the discovery of semiconductors with such a phenomenon can be accelerated by computationally evaluating the anisotropic curvatures of the band edges, paving the way for their future discovery and application.

30 DIRECT ENERGY CONVERSION↗

Distinct magneto-Raman signatures of spin-flip phase transitions in CrI 3

The discovery of 2-dimensional (2D) materials, such as CrI 3 , that retain magnetic ordering at monolayer thickness has resulted in a surge of both pure and applied research in 2D magnetism. Here, we report a magneto-Raman spectroscopy study on multilayered CrI 3 , focusing on two additional features in the spectra that appear below the magnetic ordering temperature and were previously assigned to high frequency magnons. Instead, we conclude these modes are actually zone-folded phonons. We observe a striking evolution of the Raman spectra with increasing magnetic field applied perpendicular to the atomic layers in which clear, sudden changes in intensities of the modes are attributed to the interlayer ordering changing from antiferromagnetic to ferromagnetic at a critical magnetic field. Our work highlights the sensitivity of the Raman modes to weak interlayer spin ordering in CrI 3 .

47 OTHER INSTRUMENTATION↗

Synthesis of 1T, 2H, and 6R Germanane Polytypes

Polytypism, or the ability for materials to crystallize with different stacking sequences, often leads to fundamentally different properties in families of two-dimensional materials. In this work, we show that is possible to control the polytype of GeH, a representative two-dimensional material that is synthesized topotactically by first controlling the polytype sequence of the precursor Zintl phase. 1T, 2H, and 6R GeH can be prepared by the topotactic deintercalation of 1T EuGe 2 , 2H α-CaGe 2 , and 6R β-CaGe 2 , respectively. The 6R and 1T GeH polytypes exhibit remarkably similar properties and feature band gaps of 1.63 and 1.59 eV, respectively. However, the 2H CaGe 2 precursor forms due to the incorporation of small amounts of In flux in the germanium lattice, which is retained when converted to GeH. Consequently, 2H GeH has a reduced band gap of 1.45 eV. Finally, temperature dependent diffraction of 6R GeH shows a negative coefficient of thermal expansion along the a -axis and a positive coefficient of thermal expansion along the out-of-plane c -axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A tenascin-C mimetic peptide amphiphile nanofiber gel promotes neurite outgrowth and cell migration of neurosphere-derived cells

Biomimetic materials that display natural bioactive signals derived from extracellular matrix molecules like laminin and fibronectin hold promise for promoting regeneration of the nervous system. In this work, we investigated a biomimetic peptide amphiphile (PA) presenting a peptide derived from the extracellular glycoprotein tenascin-C, known to promote neurite outgrowth through interaction with β1 integrin. The tenascin-C mimetic PA (TN-C PA) was found to self-assemble into supramolecular nanofibers and was incorporated through co-assembly into PA gels formed by highly aligned nanofibers. TN-C PA content in these gels increased the length and number of neurites produced from neurons differentiated from encapsulated P19 cells. Furthermore, gels containing TN-C PA were found to increase migration of cells out of neurospheres cultured on gel coatings. These bioactive gels could serve as artificial matrix therapies in regions of neuronal loss to guide neural stem cells and promote through biochemical cues neurite extension after differentiation. One example of an important target would be their use as biomaterial therapies in spinal cord injury. Statement of Significance Tenascin-C is an important extracellular matrix molecule in the nervous system and has been shown to play a role in regenerating the spinal cord after injury and guiding neural progenitor cells during brain development, however, minimal research has been reported exploring the use of biomimetic biomaterials of tenascin-C. Here, we describe a self-assembling biomaterial system in which peptide amphiphiles present a peptide derived from tenascin-C that promotes neurite outgrowth. Encapsulation of neurons in hydrogels of aligned nanofibers formed by tenascin-C-mimetic peptide amphiphiles resulted in enhanced neurite outgrowth. Additionally, these peptide amphiphiles promoted migration of neural progenitor cells cultured on nanofiber coatings. Tenascin-C biomimetic biomaterials such as the one described here have significant potential in neuroregenerative medicine.

59 BASIC BIOLOGICAL SCIENCES↗