Search NASA⌕ Search

Engineering topics

Golden, Johnny L.

Publications and source records attributed to Golden, Johnny L..

23 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Changes in oxidation state of chromium during LDEF exposure

The solar collector used for the McDonnell-Douglas Cascade Variable Heat Pipe, Experiment A0076 (Michael Grote - Principal Investigator) was finished with black chromium plating as a thermal control coating. The coating is metallic for low emittance, and is finely microcrystalline to a dimension which yields its high absorptivity. An underplate of nickel was applied to the aluminum absorber plate in order to achieve optimal absorptance characteristics from the black chromium plate surface. Experiment A0076 was located at tray position F9, receiving a projected 8.7 x 10 exp 21 atomic oxygen atoms/sq cm and 11,200 ESH solar radiation. During retrieval, it was observed that the aluminized kapton thermal blankets covering most of the tray were severely eroded by atomic oxygen, and that a 'flap' of aluminum foil was overlaying a roughly triangular shaped portion of the absorber panel. The aluminum foil 'flap' was lost sometime between the Long Duration Exposure Facility (LDEF) retrieval and deintegration. At deintegration, the black chromium was observed to have discolored where it had been covered by the foil 'flap'. A summary of the investigation into the cause of the discoloration is presented.

Golden, Johnny L.↗
NASA NTRS1992

Z306 molecular contamination ad hoc committee results

LDEF external surfaces which did not receive significant amounts of atomic oxygen were observed to be coated with a brown contamination, apparently the result of a condensed organic residue darkened due to UV radiation exposure. During the initial Materials Special Investigation Group (MSIG) Meeting after LDEF deintegration, held in Seattle - July 1990, this organic contamination was the subject of much discussion. The amount of contamination was thought to be significant and its source was immediately believed to be the Z306 black thermal control coating used to coat the entire inner surface of LDEF. Due to the size of the structure, it was not feasible to bake-out the coating. However, initial data on the contamination film was confusing in that significant amounts of silicon was observed by several different researchers. Silicon (from silicone) was not expected to be a potential outgassing product of the Z306 polyurethane coating. To investigate the connection between external contamination and the interior paint, a MSIG ad hoc committee was formed.

Golden, Johnny L.↗
NASA NTRS1992

Selected results for LDEF thermal control coatings

The investigation of space environmental effects on LDEF thermal control coatings by the Materials Special Investigation Group is continuing. Analyses of chromic acid anodize, A276 white paint, and Z306 black paint were conducted, assessing performance as functions of environmental exposure. Test results from additional coatings, such as on scuff plates, M003, and the black chromium plate solar absorber, were obtained. Guidelines for the use of these materials and comparisons to ground based test data will be presented.

Golden, Johnny L.↗
NASA NTRS1991

Results of examination of the A-276 white and Z-306 black thermal control paint discs flown on LDEF

Measurements of optical properties and surface characterization of paint discs on selected tray clamps were carried out and are reported. Analysis shows the loss of organic binder for those specimens exposed to atomic oxygen. A visibly darkened layer up to 2 microns thick exists on the outer surfaces of specimens exposed only to solar radiation. Properties of ground control specimens and flight control specimens, as a function of spacecraft location are reported. Representative examples from a photomicrograph survey and SEM examination are shown.

Golden, Johnny L.↗