Engineering topics

Gonzalez-Ovejero, David

Publications and source records attributed to Gonzalez-Ovejero, David.

5 records

NASA NTRS2018

Antennas for Space Instruments from GHz to THz

In this paper we present an overview of different antenna technologies for space-based instruments. We show that some of the designs that work well at gigahertz frequencies are difficult to implement at terahertz frequencies due to tight tolerance and rms surface finish requirements. We also show that antenna designs are dictated not only by the frequency of operations but also by the space platform of choice. In this paper, we also present ideas for low-profile terahertz antennas for implementation on SmallSat and CubeSat platforms.

Chattopadhyay, Goutam↗

NASA NTRS2017

Performance Verification and Testing of the COWVR Instrument Antenna

The Compact Ocean Wind Vector Radiometer (COWVR) is a technology demonstration mission, developed at the Jet Propulsion Laboratory (JPL), and scheduled for launch in 2016. The goal of COWVR is to provide the same windvector retrieval accuracy of other instruments, like WindSat, while reducing the total mass and using less power. In this paper, we present an overview of the COWVR instrument, and a detailed description of the EM (Electromagnetic) modeling of the antenna system and the test campaign carried out at JPL to assess its performance. Special emphasis has been placed on assessing the accuracy of the predictions made with the RF (Radio Frequency) model. We will show that the predicted radiation patterns are accurate enough so one can use them for orbit radiometer calibration.

Radiation Patterns↗

NASA NTRS2017

Design, Fabrication and Testing of a Modulated Metasurface Antenna at 300 GHz

This paper describes the design and realization of a modulated metasurface (MTS) antenna at 300 GHz. To overcome the hurdles associated with the use of dielectric substrates in the sub-millimeter wave range, we propose an MTS structure which consists of an array of metalized cylinders placed on a ground plane. The metal cylinders are arranged in a square lattice with sub-wavelength unit cell size. This MTS topology has been successfully used to design a spiral MTS antenna. The resulting structure has been micromachined out of a silicon wafer by means of deep reactive ion etching (DRIE). The performance of the antenna has been verified by full-wave simulations, and measurements will be available at the time of the conference.

surface waves↗

NASA NTRS2017

Shared Aperture Metasurface Antennas for Multibeam Patterns

This paper describes various possibilities for designing multibeam antennas using a single metasurface (MTS) aperture. Both single-source and multi-source feeding schemes are considered. For the single-source case, two approaches are investigated: i) division of the aperture in several angular sectors (one per beam) and ii) superposition of the individual modulations required to obtain the beams in the desired directions. A configuration based on a multi-source feeding scheme is also tailored by a superposition of modulation patterns. Numerical results based on the Method of Moments are presented for validation.

leaky waves↗

NASA NTRS2016

Silicon Micromachined Modulated Metasurface Antennas in the Terahertz Range

This paper explores the capabilities of a class of metasurface (MTS), which consists of metalized cylinders on a ground plane, for the realization of modulated MTS antennas at terahertz (THz) frequencies. The proposed structure is particularly appropriate for being micromachined out of a silicon wafer by means of deep reactive ion etching (DRIE). The constraints that DRIE imposes in the design of the MTS unit cell are discussed, along with the advantages of silicon micromachined modulated MTSs with respect to other fabrication approaches in the THz range.

deep-reactive ion etching↗