Search NASA⌕ Search

Engineering topics

Gooden, Matthew Edgell

Publications and source records attributed to Gooden, Matthew Edgell.

Reaction Rate Ratios for Recent Fast Metal Experiments with Large Plutonium Masses

Reaction rate ratios are integral responses that are used within the criticality experiments field because they contain spectral information. While these types of measurements have been utilized for nuclear data validation with historic experiments, few experiments of this type have been utilized for recent experiments, as few exist. This work focuses on measured reaction rate ratios for two nearly bare plutonium critical assemblies with different geometries: one that is cube like (with a Pu mass of 40 kg) and one that is slab like (with a Pu mass of 109 kg). Irradiations were performed with both configurations in which foils were placed near the center of the assembly. Plutonium, highly enriched uranium, depleted uranium, and Au foils were included in the irradiation and counted via high-purity germanium detectors. From these measurements, reaction rate ratios were calculated. Measured and simulated values and uncertainties are presented for the reaction rate ratios. Ratios utilizing the following reactions are given in this work: 197 Au(n, γ), 197 Au(n,2n), 235 U(n,fission), 238 U(n, fission), 238 U(n,2n), 238 U(n,γ), and 239 Pu(n,fission). Uncertainties for the measured reaction rate ratios ranged from 4% to 7%, and the contribution of various parameters to this uncertainty was investigated. The results are compared to historical experiments and should be used for nuclear data validation for future nuclear data library releases. These measurements are part of the EUCLID (Experiments Underpinned by Computational Learning for Improvements in Nuclear Data) project, which utilizes measurement responses in addition to k eff (such as these reaction rate ratios) to help reduce uncertainties in 239 Pu nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy dependence of fission product yields in the second-chance fission region

An extensive dataset of cumulative fission product yields has been generated under a joint collaboration between Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and the Triangle Universities Nuclear Laboratory (TUNL). The energy dependence of the cumulative yield for a select number of high-yield fission products has been measured using quasimonoenergetic neutrons with energies between 5.5 and 11.0 MeV. This is in addition to previously published data covering 0.5–4.5 and 14.8 MeV. The absolute number of fissions was determined during the irradiation period using dual-fission ionization chambers, and the fission products were measured postactivation by whole target γ-ray spectroscopy. Here this paper presents the absolute cumulative fission product yields as a function of incident neutron energy from the neutron-induced fission of 235 U, 238 U, and 239 Pu isotopes at four incident energies in the second-chance fission region and compares them with existing literature values. Corrections relevant to this collaboration's previously published data are also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of 235 U, 238 U and 239 Pu fission ionization chamber foils by α and γ -ray spectrometry

The masses of thin, electroplated deposits of 235 U, 238 U and 239 Pu on titanium backings have been determined to better than 1.3% precision by employing three complementary measurement techniques: $\alpha$ spectrometry, 2$\pi$ gas counting, and $\gamma$-ray spectrometry. A dedicated $\alpha$ spectrometer was designed and calibrated to allow for repeatable, high-precision measurements of the absolute $\alpha$ activity of a sample. The isotopic composition of the sample was determined by fitting the peaks in the $\alpha$ spectrum, a technique which was demonstrated to be generally consistent with mass spectrometry. Independently, the total activity of the deposits were measured in a 2$\pi$ gas flow proportional counter. A detailed study of the effects of $\alpha$ particle straggling in the actinide deposit and $\alpha$ particle recoil off the sample backing material was performed. The masses of these actinide deposits were also measured via $\gamma$-ray spectrometry. Here, we found that all three systematically independent techniques produced consistent results, and could be combined into a weighted average with further reduced uncertainty. The mass ratios of these actinide deposits were determined to better than 1% precision via $\alpha$ spectrometry, enabling high-precision fission cross section ratio measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fission product yields from the 238 U ( n,f ) reaction at E n = 4.6 MeV

Here, we present cumulative fission product yields from the 238 U (n, f) reaction at an incident energy of 4.6 MeV for fission products with half-lives from less than one second to several hours. We employed direct γ-ray spectroscopy to measure unseparated fission products with a conventional neutron activation analysis and a cyclic activation technique using the RApid Belt-driven Irradiated Target Transfer System (RABITTS). Yields were determined for 78 isotopes and isomers, covering the mass range 84 ≤ A ≤ 148 and the charge range from 33(As) ≤ Z ≤ 58(Ce). Our experimental cumulative yields are compared to the literature and evaluated data at E n ≈0.5 MeV from ENDF/B-VIII.0 and JEFF-3.3 libraries and with theoretical models using the GEF and FREYA codes at E n =4.6 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

End of Year Report for ICF Related Activities on J14C

There were two main activities related to Radchem at NIF for FY ’18: Reaction-In-Flight (RIF) neutron measurements and a Bromine-doped Capsule dedicated experiment. The RIF measurements were performed by neutron activation of Thulium and Bismuth foils, held at 50 cm from Target Chamber Center (TCC), in the Neutron Activation Detectors (NADs) attached to one or more Diagnostic Instrument Man ipulators (DIMs). The Bromine-doped capsule experiment, which was to be a follow-on shot to one performed in Q4 of FY ’17, was not shot during this FY.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

End of Year FY ’18 Report on Fission Product Yield Measurements for J13200

Work has continued during the FY on the energy dependent cumulative fission product yield measurements, in collaboration with LLNL, at the Triangle Universities Nuclear Laboratory (TUNL). The first of two goals for this FY was to complete the second chance fission region, between 6-11 MeV incident neutron energy, for the 3 target isotopes that have been under study; 235,238 U, and 239 Pu.The second goal was to make progress towards a thermal neutron measurement at the MIT Research Reactor, as a tie-in to the historical LANL radiochemistry and the large array of data generated by the TUNL work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

35 Cl(n,p) 35 S Reaction Cross-Section Using Monoenergetic Neutrons in the Intermediate and Fast Energy Regions

The 35 Cl(n,p) 35 S reaction plays an important role in the operation of Molten Salt Reactors (MSR). Chlorine has two stable isotopes, 35 Cl and 37 Cl, with natural abundances of 75% and 25%, respectively. Due to concerns with the large capture cross-section of 35 Cl, Salts enriched in 37 Cl are more desirable, however, there will always be traces of 35 Cl and enrichment is not always feasible.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The 12 C(d,n) 13 N Diagnostic and the Need to Re-measure the Cross Section

We discuss the importance of the 12 C(d,n) 13 N mix diagnostics at NIF and show how this reaction can be used to determine the fraction of the 79 Kr signal produced by knock-on deuterons in bromine doped CH ablator capsules. We point out that current cross section measurements are discrepant with one another, by about a factor of two. We propose a new method for measuring this cross section, including a technique for uncovering the possible source of the current discrepancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2017 Report for New LANL Physical Vapor Deposition Capability

There is an urgent need at LANL to achieve uniform, thin film actinide targets that are essential for nuclear physics experiments. The target preparation work is currently performed externally by Professor Walter Loveland at Oregon State University, who has made various evaporated actinide targets such as Th and U for use on several nuclear physics measurements at LANSCE. We are developing a vapor deposition capability, with the goal of evaporating Th and U in the Actinide Research Facility (ARF) at TA-48. In the future we plan to expand this work to evaporating transuranic elements, such as Pu. The ARF is the optimal location for evaporating actinides because this lab is specifically dedicated to actinide research. There are numerous instruments in the ARF that can be used to provide detailed characterization of the evaporated thin films such as: Table top Scanning Electron Microscope, In-situ X-Ray Diffraction, and 3D Raman spectroscopy. These techniques have the ability to determine the uniformity, surface characterization, and composition of the deposits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗