Manual and Automated In Situ Contact Angle Measurements of scCO2 and Brine in Sandstone Cores Using Sessile Drop and Micro-CT Imaging - A Correlation to Pore Connectivity
Presented by NETL at Interpore 10th Annual Meeting, 5/18
Engineering topics
Publications and source records attributed to Goodman, Angela.
Presented by NETL at Interpore 10th Annual Meeting, 5/18
Presented by NETL at Interpore 10th Annual Meeting, 5/18
Presented by NETL at 2017 annual GSA meeting; 10/17
Presented by NETL at 2017 Microscopy and Microanalysis Annual Meeting; 8/17
Presented by NETL at 2017 Microscopy and Microanalysis Annual Meeting; 8/17
This user’s manual guides the use of the National Energy Technology Laboratory’s (NETL) CO 2 Storage prospeCtive Resource Estimation Excel aNalysis (CO 2 -SCREEN) tool, which was developed to aid users screening saline formations for prospective CO 2 storage resources. CO 2 -SCREEN applies U.S. Department of Energy (DOE) methods and equations for estimating prospective CO 2 storage resources for saline formations. CO 2 -SCREEN was developed to be substantive and user-friendly. It also provides a consistent method for calculating prospective CO 2 storage resources that allows for consistent comparison of results between different research efforts, such as the Regional Carbon Sequestration Partnerships (RCSP). CO 2 -SCREEN consists of an Excel spreadsheet containing geologic inputs and outputs, linked to a GoldSim Player model that calculates prospective CO 2 storage resources via Monte Carlo simulation.
Presented by NETL at GSCO2 3rd Annual Review Meeting, 3/17Presented by NETL at GSCO2 3rd Annual Review Meeting, 3/17
Three techniques to measure and understand the contact angle, θ, of a CO 2 /brine/rock system relevant to geologic carbon storage were performed with Mount Simon sandstone. Traditional sessile drop measurements of CO 2 /brine on the sample were conducted and a water-wet system was observed, as is expected. A novel series of measurements inside of a Mount Simon core, using a micro X-ray computed tomography imaging system with the ability to scan samples at elevated pressures, was used to examine the θ of residual bubbles of CO 2 . Within the sandstone core the matrix appeared to be neutrally wetting, with an average θ around 90°. A large standard deviation of θ (20.8°) within the core was also observed. To resolve this discrepancy between experimental measurements, a series of Lattice Boltzmann model simulations were performed with differing intrinsic θ values. The model results with a θ = 80° were shown to match the core measurements closely, in both magnitude and variation. The small volume and complex geometry of the pore spaces that CO 2 was trapped in is the most likely explanation of this discrepancy between measured values, though further work is warranted.
Presented by NETL at the Joint 52nd Northeastern Annual Section / 51st North-Central Annual Section Meeting - 2017; Pittsburgh, PA; March 19-21, 2017
Carbon storage resource estimation in subsurface saline formations plays an important role in establishing the scale of carbon capture and storage activities for governmental policy and commercial project decision-making. Prospective CO 2 resource estimation of large regions or subregions, such as a basin, occurs at the initial screening stages of a project using only limited publicly available geophysical data, i.e. prior to project-specific site selection data generation. As the scale of investigation is narrowed and selected areas and formations are identified, prospective CO 2 resource estimation can be refined and uncertainty narrowed when site-specific geophysical data are available. Here, we refine the United States Department of Energy – National Energy Technology Laboratory (US-DOE-NETL) methodology as the scale of investigation is narrowed from very large regional assessments down to selected areas and formations that may be developed for commercial storage. In addition, we present a new notation that explicitly identifies differences between data availability and data sources used for geologic parameters and efficiency factors as the scale of investigation is narrowed. This CO 2 resource estimation method is available for screening formations in a tool called CO 2 -SCREEN.
Not Available
Presented by NETL at 8th International Conference on Porous Media; InterPore2016; 5/16
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Presented by NETL at Gordon Conference, 5/15
Variable-temperature in situ ATR-FTIR spectra are presented for the porous spin-crossover compounds [Fe(pyrazine)Ni(CN) 4 ] and [Fe(pyrazine)Pt(CN) 4 ] under CO 2 pressures of up to 8 bar. Significant shifts in the ν 3 and ν 2 IR absorption bands of adsorbed CO 2 are observed as the host materials undergo transition between low- and high-spin states. Computational models used to determine the packing arrangement of CO 2 within the pore structures show a preferred orientation of one of the adsorbed CO 2 molecules with close O=C=O···H contacts with the pyrazine pillar ligands. The interaction is a consequence of the commensurate distance of the inter-pyrazine separations and the length of the CO 2 molecule, which allows the adsorbed CO 2 to effectively bridge the pyrazine pillars in the structure. The models were used to assign the distinct shifts in the IR absorption bands of the adsorbed CO 2 that arise from changes in the O=C=O···H contacts that strengthen and weaken in correlation with changes in the Fe–N bond lengths as the spin state of Fe changes. The results indicate that spin-crossover compounds can function as a unique type of flexible sorbent in which the pore contractions associated with spin transition can affect the strength of CO 2 –host interactions.
Concern about the role of greenhouse gases in global climate change has generated interest in sequestering CO{sub 2} from fossil-fuel combustion in deep saline formations. Pore space in these formations is initially filled with brine, and space to accommodate injected CO{sub 2} must be generated by displacing brine, and to a lesser extent by compression of brine and rock. The formation volume required to store a given mass of CO{sub 2} depends on the storage mechanism. We compare the equilibrium volumetric requirements of three end-member processes: CO{sub 2} stored as a supercritical fluid (structural or stratigraphic trapping); CO{sub 2} dissolved in pre-existing brine (solubility trapping); and CO{sub 2} solubility enhanced by dissolution of calcite. For typical storage conditions, storing CO{sub 2} by solubility trapping reduces the volume required to store the same amount of CO{sub 2} by structural or stratigraphic trapping by about 50%. Accessibility of CO{sub 2} to brine determines which storage mechanism (structural/stratigraphic versus solubility) dominates at a given time, which is a critical factor in evaluating CO{sub 2} volumetric requirements and long-term storage security.