Search NASA⌕ Search

Engineering topics

Grapes, Michael D.

Publications and source records attributed to Grapes, Michael D..

Explosively driven Richtmyer–Meshkov instability jet suppression and enhancement via coupling machine learning and additive manufacturing

The ability to control the behavior of fluid instabilities at material interfaces, such as the shock-driven Richtmyer–Meshkov instability, is a grand technological challenge with a broad number of applications ranging from inertial confinement fusion experiments to explosively driven shaped charges. In this work, we use a linear-geometry shaped charge as a means of studying methods for controlling material jetting that results from the Richtmyer–Meshkov instability. A shaped charge produces a high-velocity jet by focusing the energy from the detonation of high explosives. The interaction of the resulting detonation wave with a hollowed cavity lined with a thin metal layer produces the unstable jetting effect. By modifying the characteristics of the detonation wave prior to striking the lined cavity, the kinetic energy of the jet can be enhanced or reduced. Modifying the geometry of the liner material can also be used to alter jetting properties. We apply optimization methods to investigate several design parameterizations for both enhancing or suppressing the shaped-charge jet. This is accomplished using 2D and 3D hydrodynamic simulations to investigate the design space that we consider. We also apply new additive manufacturing methods for producing the shaped-charge assemblies, which allow for the experimental testing of complicated design geometries obtained through computational optimization. We present a direct comparison of our optimized designs with experimental results carried out at the High Explosives Application Facility at Lawrence Livermore National Laboratory.

36 MATERIALS SCIENCE↗

Reducing Richtmyer–Meshkov instability jet velocity via inverse design

In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analog. The shaped charge jet analog comprises a copper liner, a high explosive (HE), and a silicone buffer. Here, we apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and the HE that results in the largest possible change in jet velocity. The use of a genetic algorithm allows for discoveries of unintuitive, complex, yet optimal buffer designs. Experiments using the optimal design verified the effectiveness of the buffer and validated the machine learning approach to hydrodynamic design optimization.

36 MATERIALS SCIENCE↗

Extrusion parameter control optimization for DIW 3D printing using image analysis techniques

Material extrusion is a well-recognized facet of additive manufacturing that involves the fabrication of parts through the deposition of structural material from an extrusion head from a bulk supply. In the subdivision of Direct Ink Writing (DIW) additive manufacturing, challenges arise when the structural material is flowable, synchronous extrusion control and tool movement becomes critical for achieving high-quality parts with low defect populations. DIW techniques are most used in laboratory settings using expensive custom instruments and may require specialized 3D slicing software. Here, in this study, the fabrication of an inexpensive, consumer-friendly progressive cavity pump dispensing system is detailed, in which can create high-quality parts by executing G-code commands produced from a commercial slicing software. The precision and repeatability of the movement-synchronized material extrusion is demonstrated through a series of optimization schemes, entailing the alteration of various control parameters, which directly affect the extrusion properties demonstrated during a print. In situ diagnostics were implemented to evaluate the results of the established optimization experiment. Using a machine vision technique, images of the optimization prints are processed. Following this, a supervised machine learning model was trained to autonomously judge whether or not the extrusion parameters produced a passing or failing result. The machine learning scheme serves as a preliminary benchmark for future layer-by-layer evaluation of more complex DIW parts. The construction of the printer and development of in situ characterization capabilities demonstrates the ability for this printer to create high-fidelity DIW parts for a fraction of the price of other systems.

42 ENGINEERING↗

Probing the role of solids loading and mix procedure on the properties of acoustically mixed materials for additive manufacturing

We report resonant acoustic mixing has been of particular interest for use in additive manufacturing since viscous, solids-loaded materials can be difficult to mix and inhomogeneity has adverse effects on print quality. In this study, we detail a method to iterate through different formulations and mix procedures and assess mixture quality. The approach utilizes a constant pressure-driven flow test to collect statistics on flow rate through a standard geometry. This test is first applied to well mixed formulations containing particulate solids and find that the results are sensitive to viscosity produced by solids content. We then consider the formulations at various stages of mixing and find that the spread in the volume measurements is indicative of the mixing quality; poorly mixed material yields measurements with wide distributions. We believe this testing approach can be useful when screening new formulations, developing mixing processes, or for quality control.

36 MATERIALS SCIENCE↗

In situ laser profilometry for material segmentation and digital reconstruction of a multicomponent additively manufactured part

In addition to its ability to produce geometrically complex parts, additive manufacturing offers a unique opportunity to collect data about a component while it is being fabricated. However, there has only been limited effort to characterize parts morphologically and compositionally in situ. In this article, we present a layer-by-layer, laser profilometry-based in situ characterization technique as a method to digitally reconstruct a multi-material part. Data collected by the laser profilometer yields height maps and grayscale images which are voxelized using purpose-built software to volumetrically reconstruct the part. Additionally, the same part was also analyzed using X-ray computed tomography (CT) which was not able to resolve the different compositional regions within the part, but captured the filament morphology. The part was then bisected to compare the digital reconstruction to the actual part morphology and composition. Overall, the digital reconstruction was in good agreement with both the CT and bisected images. Deviations between the digital reconstruction and the CT/bisected images are likely the result of image segmentation settings or material shifts after data was collected. The in situ characterization method demonstrated here sets the stage for real time process monitoring and paves the way for additively manufactured parts that are “born qualified.”

36 MATERIALS SCIENCE↗

Active Mixing of Reactive Materials for 3D Printing

The mixing of materials during additive manufacturing is a major benefit which allows one to compositionally and spatially tailor material properties, for example to locally control the reactivity in fuel–oxidizer systems known as thermites. This work characterizes an active mixing printhead used in conjunction with a 3D printing process known as Direct Ink Writing. Besides compositional control, a major benefit of this approach is that it offers a safe method for working with these materials, which can otherwise be hazardous once mixed. Custom fuel and oxidizer inks are fed at fixed volumetric rates into an active mixing printhead, and both the rotational speed of the mixing impeller as well as the fuel–oxidizer ratio are varied. Upon ignition, the propagation speed increases with the rotational speed of the mixer and plateaus above a critical value of ≈750 rpm. The critical mixing speed is corroborated by computational fluid simulations and an analytical expression that considers the inks’ complex fluid behavior. Additionally, varying the composition results in a wide range of propagation speeds with peak reactivity corresponding to a fuel–rich formulation ( Φ = 1.5). As a result, a test article incorporating a fast– and slow–burning region demonstrates how spatial composition can manipulate the reactivity.

3D printing↗

In situ observations of reacting Al/Fe 2 O 3 thermite: Relating dynamic particle size to macroscopic burn time

Time-resolved x-ray imaging is used to capture high-resolution images of the Al/Fe 2 O 3 thermite reaction as it proceeds in an extended burn tube. The observed thermite reaction products are generally large, multi-phase composite particles. Image processing algorithms are developed to extract a continuous record of composite particle size as a function of time and distance from the ignition point. Small particles are observed immediately after ignition, followed by a rapid increase in particle size and a gradual decline toward late times. Correlating the dynamic particle size with visible light emission from the reaction, we propose a two-stage mechanism where the combination of early ignition and delayed expansion causes the material closest to the ignition point to undergo substantial coalescence before it begins moving down the tube. We also identify two mechanisms that may contribute to particle size refinement at late times, both based on the collapse of large gas bubbles that are observed preferentially in particles at earlier times. A new approach to extracting burn times from luminous intensity data is explored, and we find that a more nuanced analysis of burn time and luminous intensity may help to improve reactivity assessments when data from in situ studies is unavailable.

36 MATERIALS SCIENCE↗

Development and Characterization of 3D Printable Thermite Component Materials

Additive manufacturing (AM) has recently shown great promise as a means to tailor a wide range of material properties, both quasi-static and dynamic. An example of controlling the dynamic behavior is to tailor the chemical energy release rate in composite energetic materials such as thermites – which are a subset of pyrotechnics that use a metal fuel and a metal oxide as an oxidizer. Since these materials are most hazardous once finely mixed, the approach taken here is to formulate the fuel and oxidizer separately such that they can be mixed on-the-fly. The development, formulation, and characterization of two respective aqueous 3D printable inks consisting of Al and CuO are discussed. The rheological properties and ability of the material to span gaps are characterized. To demonstrate that the materials could be mixed and sustain a reaction, the inks are fed into a static mixing nozzle and extruded into a high-aspect ratio test strip. Upon drying, the material can be ignited and sustain a propagation through the part. These results present a facile, and safe, way to AM thermite which can be used for more detailed follow on studies looking at the role of architecture on the reactivity.

36 MATERIALS SCIENCE↗

K-9 training aids made using additive manufacturing

Additive Manufacturing (AM) is used to make aids that target the training of K-9s to detect explosives. The process uses mixtures of explosives and matrices commonly used in AM. The explosives are formulated into a mixture with the matrix and printed using AM techniques and equipment. The explosive concentrations are kept less than 10% by wt. of the mixture to conform to requirements of shipping and handling.

42 ENGINEERING↗

Explosives mimic for testing, training, and monitoring

Additive Manufacturing (AM) is used to make mimics for explosives. The process uses mixtures of explosives and matrices commonly used in AM. The explosives are formulated into a mixture with the matrix and printed using AM techniques and equipment. The explosive concentrations are kept less than 10% by wt. of the mixture to conform to requirements of shipping and handling.

36 MATERIALS SCIENCE↗

A detailed study of the Al 3 Ni formation reaction using nanocalorimetry

In this study, the Al 3 Ni formation reaction was examined at 11 heating rates ranging from 1000 K/s to 100,000 K/s using high-rate nanocalorimetry, time-resolved electron microscopy, isoconversional analysis, and combined kinetic analysis. Two main reaction steps are identified. In the first, interdiffusion occurs between reactants without product nucleation. The estimated activation energy for this process, 113 kJ/mol ± 4 kJ/mol, suggests grain boundary diffusion as the most likely controlling mechanism. In the second step, the Al 3 Ni product phase nucleates and grows. Here, the estimated activation energy of 137 kJ/mol ± 4 kJ/mol suggests that growth is enabled by diffusion of Ni through bulk Al. Combined kinetic analysis of the growth regime yields an Avrami reaction model with an exponent of 0.5, implying 1D diffusion-limited growth from a fixed number of randomly distributed nuclei. Finally, combining the results for the two regimes, we propose a mechanism where the Al 3 Ni product initially nucleates along the grain boundaries and then grows laterally until the reactants are consumed.

36 MATERIALS SCIENCE↗

In situ transmission electron microscopy investigation of the interfacial reaction between Ni and Al during rapid heating in a nanocalorimeter

The Al/Ni formation reaction is highly exothermic and of both scientific and technological significance. In this report, we study the evolution of intermetallic phases in this reaction at a heating rate of 830 K/s. 100-nm-thick Al/Ni bilayers were deposited onto nanocalorimeter sensors that enable the measurement of temperature and heat flow during rapid heating. Time-resolved transmission electron diffraction patterns captured simultaneously with thermal measurements allow us to identify the intermetallic phases present and reconstruct the phase transformation sequence as a function of time and temperature. The results show a mostly unaltered phase transformation sequence compared to lower heating rates.

36 MATERIALS SCIENCE↗