Search NASA⌕ Search

Engineering topics

Graser, Evan

Publications and source records attributed to Graser, Evan.

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

First 210 solar days of Mars 2020 Perseverance Robotic Operations – Mobility, Robotic Arm, Sampling, and Helicopter

This paper includes the summary, lessonslearned, and upcoming plans for the first 210 Mars solar days(sols) of the mission. The focus of the paper is on roboticoperations which has the primary responsibility for strategicplanning, uplink commanding and downlink analysis forrover mobility and navigation, robotic arm operation, thesampling and caching capability including coring, theadaptive caching assembly and the 2nd sample handlingrobotic arm, and interface to the Mars helicopter Ingenuity.As of Sol 210 the rover has driven 2663.65 meters, executed20764 robotic arm and sampling commands, and hassuccessfully completed 13 helicopter flights covering 2382meters horizontal distance. It includes the OperationsReadiness Tests in preparation for landing, landing and initialcheckouts, strategic route planning to the science destinationand waypoints, surface checkout of all of the roboticscapability of the rover. It also discusses the strategic planningand tactical agility needed for interleaving scienceinvestigation and technology demonstration of the Marshelicopter flights where a minimum distance had to bemaintained between the rover and helicopter during flights. Itdiscusses the challenges with planning robotic operations andaddressing anomalies with the larger uncertainty presentduring early mission operations. It also discusses the impacton robotic operations from lessons incorporated fromprevious missions.

Ono, Hiro↗
NASA NTRS2022

Assessing Mars Curiosity Rover Wheel Damage

An alarming rate of wheel skin cracks were first observed on the Mars Science Laboratory (MSL) Curiosity rover about 14 months after the start of its surface mission. Nine years later (as of August 2, 2021), Curiosity has four broken wheelgrousers, three on the left middle wheel and one on the right middle wheel. There are a substantial number of wheel skin cracks on the left front, left middle, and right middle wheels such that the number of grousers on each that are consideredat risk of breaking are 10, 7, and 11, respectively. Although the current level of wheel damage does not significantly limit Curiosity’s mission objectives, a higher damage rate could impact surface operations, so the damage rate is closely monitored. OnNovember 30, 2013, the MSL Surface Operations team began periodically acquiring images of Curiosity’s wheels. In this paper, we describe the process the Mobility Operations team uses to assess wheel damage, the current state of Curiosity’swheels, and how the wheel damage assessments have influenced driving guidelines and wheel imaging frequency.

Rink, Kimberly↗
NASA NTRS2020

Rimmed Wheel Performance on the Mars Science Laboratory Scarecrow Rover

The Mars Science Laboratory (MSL) Curiosity rover experienced increasing wheel damage beginning in October 2013. While the wheels were designed to operate with considerable damage, the rate at which damage was occurring was unexpected and raised concerns regarding wheel life expectancy. As of Sol 2555 (10-14-19), there are two broken grousers on the left middle wheel, and one broken grouser on the right middle wheel. One possible scenario, albeit remote, is that enough grousers break on a wheel such that unconstrained portions of the wheel could contact the cable running from the rover motor controller assembly to the wheel's drive actuator. If the cable to a drive actuator is damaged, that wheel may no longer respond to commands. To make progress towards a navigation goal position, that wheel would need to be dragged. To mitigate the risk of damaging a cable running to a wheel’s drive actuator, the unconstrained portion of a wheel could be strategically shed by performing driving maneuvers on an immovable rock. What would remain after wheel shedding is a rimmed wheel (the outer 1/3 of the wheel). We studied the feasibility of remotely commanding the rover to perform the shed maneuver on one of its front wheels. To inform whether or not to shed the wheels, we tested the performance of driving on one or more rimmed wheels in flight. This led to a two-month test campaign in the Jet Propulsion Laboratory (JPL) Mars Yard using the Scarecrow testbed rover. Driving and steering performance was characterized on a variety of terrain types and slopes in a worst-case rimmed wheeled configuration. Test results indicate that if wheel shedding could be successfully executed in flight, Curiosity could continue to drive indefinitely on rimmed wheels.

Graser, Evan↗