Search NASA⌕ Search

Engineering topics

Graves, J P

Publications and source records attributed to Graves, J P.

At least 19 records

Equilibrium and stability in a heliotron with anisotropic hot particle slowing-down distribution

The equilibrium and linear fluid Magnetohydrodynamic (MHD) stability in an inward-shifted large helical device heliotron configuration are investigated with the 3D ANIMEC and TERPSICHORE codes, respectively. A modified slowing-down distribution function is invoked to study anisotropic pressure conditions. An appropriate choice of coefficients and exponents allows the simulation of neutral beam injection in which the angle of injection is varied from parallel to perpendicular. The fluid stability analysis concentrates on the application of the Johnson-Kulsrud-Weimer energy principle. The growth rates are maximum at <{beta}>{approx}2%, decrease significantly at <{beta}>{approx}4.5%, do not vary significantly with variations of the injection angle and are similar to those predicted with a bi-Maxwellian hot particle distribution function model. Stability is predicted at <{beta}>{approx}2.5% with a sufficiently peaked energetic particle pressure profile. Electrostatic potential forms from the MHD instability necessary for guiding centre orbit following are calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic damping of resistive wall modes in ITER

Full drift kinetic modelling including finite orbit width effects has been used to assess the passive stabilisation of the resistive wall mode (RWM) that can be expected in the ITER advanced scenario. At realistic plasma rotation frequency, the thermal ions have a stabilising effect on the RWM, but the stability limit remains below the target plasma pressure to achieve Q = 5. However, the inclusion of damping arising from the fusion-born alpha particles, the NBI ions, and ICRH fast ions extends the RWM stability limit above the target {beta} for the advanced scenario. The fast ion damping arises primarily from finite orbit width effects and is not due to resonance between the particle frequencies and the instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Individual Sawtooth Pacing by Synchronized ECCD in TCV

Previous real-time sawtooth control scenarios using EC actuators have attempted to shorten or lengthen the sawtooth period by optimally positioning the EC absorption near the q = 1 surface. In new experiments we demonstrate for the first time that individual sawtooth crashes can be repetitively induced at predictable times by reducing the stabilizing ECCD power after a predetermined time from the preceding crash. Other stabilizing actuators (e.g. ICRF, NBI) are expected to produce similar effects. Armed with these results, we present a new sawtooth / NTM control paradigm for improved performance in burning plasmas. The potential appearance of neo-classical tearing modes, triggered by long period sawtooth crashes even at low beta, becomes predictable and therefore amenable to preemptive ECCD. The ITER Electron Cyclotron Upper Launcher (EC-UL) design incorporates the needed functionalities for this method to be applied. The methodology and associated TCV experiments will be presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sawtooth Pacing by Real-Time Auxiliary Power Control in a Tokamak Plasma

In the standard scenario of tokamak plasma operation, sawtooth crashes are the main perturbations that can trigger performance-degrading, and potentially disruption-generating, neoclassical tearing modes. This Letter demonstrates sawtooth pacing by real-time control of the auxiliary power. It is shown that the sawtooth crash takes place in a reproducible manner shortly after the removal of that power, and this can be used to precisely prescribe, i.e., pace, the individual sawteeth. In combination with preemptive stabilization of the neoclassical tearing modes, sawtooth pacing provides a new sawtooth control paradigm for improved performance in burning plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-field drift Hamiltonian particle orbits in axisymmetric tokamak geometry

A Hamiltonian/Lagrangian theory to describe guiding center orbit drift motion that is canonical in Boozer magnetic coordinates is developed to include full electrostatic and electromagnetic perturbed fields in axisymmetric tokamak geometry. Furthermore, the radial component of the equilibrium magnetic field in the covariant representation is retained and the background equilibrium state extends to anisotropic plasma pressure conditions. A gauge transformation on the perturbed vector potential is imposed to guarantee canonical structure in the Boozer frame. Perturbed field nonlinear wave-wave interactions affect only the evolution of the guiding center particle parallel gyroradius. The evolution of the particle coordinate positions retains only linear wave-particle interactions. For particle motion in magnetohydrodynamic (MHD) instability structures, the electrostatic potential is linked mainly to the binormal component of the perturbed displacement vector when finite {delta}A{sub perpendicular} components are included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sawtooth control in ITER using ion cyclotron resonance heating

Numerical modeling of the effects of ion cyclotron resonance heating (ICRH) on the stability of the internal kink mode suggests that ICRH should be considered as an essential sawtooth control tool in ITER. Sawtooth control using ICRH is achieved by directly affecting the energy of the internal kink mode rather than through modification of the magnetic shear by driving localized currents. Consequently, ICRH can be seen as complementary to the planned electron cyclotron current drive actuator, and indeed will improve the efficacy of current drive schemes. Simulations of the ICRH distribution using independent RF codes give confidence in numerical predictions that the stabilizing influence of the fusion-born alphas can be negated by appropriately tailored minority (3)He ICRH heating in ITER. Finally, the effectiveness of all sawtooth actuators is shown to increase as the q = 1 surface moves towards the manetic axis, whilst the passive stabilization arising from the alpha and NBI particles decreases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Reconnection Triggering Magnetohydrodynamic Instabilities during a Sawtooth Crash in a Tokamak Plasma

Thomson scattering measurements with subcentimeter spatial resolution have been made during a sawtooth crash in a Mega Ampere Spherical Tokamak fusion plasma. The unparalleled resolution of the temperature profile has shed new light on the mechanisms that underlie the sawtooth. As magnetic reconnection occurs, the temperature gradient at the island boundary increases. The increased local temperature gradient is sufficient to make the helical core unstable to ideal magnetohydrodynamic instabilities, thought to be responsible for the rapidity of the collapse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neoclassical equilibria as starting point for global gyrokinetic microturbulence simulations

The implementation of linearized operators describing inter- and like-species collisions in the global gyrokinetic particle-in-cell code ORB5[S. Jolliet, Comput. Phys. Commun. 177, 409 (2007)] is presented. A neoclassical axisymmetric equilibrium with self-consistent electric field can be obtained with no assumption made on the radial width of the particle trajectories. The formulation thus makes it possible to study collisional transport in regions where the neoclassical approximation breaks down such as near the magnetic axis. The numerical model is validated against both analytical results as well as other simulation codes. The effects of the poloidally asymmetric Fourier modes of the electric field are discussed, and the contribution of collisional kinetic electrons is studied. In view of subsequent gyrokinetic simulations of turbulence started from a neoclassical equilibrium, the problem of numerical noise inherent to the particle-in-cell approach is addressed. A novel algorithm for collisional gyrokinetic simulation switching between a local and a canonical Maxwellian background for, respectively, carrying out the collisional and collisionless dynamics is proposed, and its beneficial effects together with a coarse graining procedure [Y. Chen and S. E. Parker, Phys. Plasmas 14, 082301 (2007)] on noise and weight spreading reduction are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tokamak Magnetohydrodynamic Equilibrium States with Axisymmetric Boundary and a 3D Helical Core

Magnetohydrodynamic (MHD) equilibrium states with imposed axisymmetric boundary are computed in which a spontaneous bifurcation develops to produce an internal three-dimensional (3D) configuration with a helical structure in addition to the standard axisymmetric system. Equilibrium states with similar MHD energy levels are shown to develop very different geometric structures. The helical equilibrium states resemble saturated internal kink mode structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new sawtooth control mechanism relying on toroidally propagating ion cyclotron resonance frequency waves: Theory and Joint European Torus tokamak experimental evidence

The sawtooth control mechanism in plasmas employing toroidally propagating ion cyclotron resonance waves is extended. The asymmetrically distributed energetic passing ions are shown to modify the ideal internal kink mode when the position of the minority ion cyclotron resonance resides within a narrow region close to the q=1 surface. An analytical treatment of the internal kink mode in the presence of model distribution function with parallel velocity asymmetry is developed. The fast ion mechanism explains the strong sensitivity of sawteeth to resonance position, and moreover is consistent with dedicated Joint European Torus [F. Romanelli, Nucl. Fusion 49, 104006 (2009)] experiments which controlled sawteeth despite negligible current drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anomalous transport of energetic particles in ITER relevant scenarios

The anomalous transport of energetic ions in the presence of turbulent fields is investigated. Nonlinear simulations of a steady-state ITER [R. Aymar et al., Nucl. Fusion 41, 1301 (2001)] scenario have been carried out using the gyrokinetic turbulence code GENE[F. Jenko et al., Phys. Plasmas 7, 1904 (2000)], modeling the suprathermal particles as high temperature Maxwellian distributions in the passive tracer limit. Velocity space analysis shows that single particle diffusivities of ions above the critical energy are significantly larger than their neoclassical counterpart.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Importance of centrifugal effects for the internal kink mode stability in toroidally rotating tokamak plasmas

Analytical theory and two different magnetohydrodynamical stability codes are used in a study of the effects of toroidal plasma rotation on the stability of the ideal, internal kink mode in tokamaks. The focus of the paper is on the role that the centrifugal effects on the plasma equilibrium play for the stability of this mode, and results from one code where centrifugal effects are self-consistently included (CASTOR-FLOW) [E. Strumberger et al., Nucl. Fusion 45, 1156 (2005)] are compared with the results from another code where such effects are not taken into account (MISHKA-F) [I. T. Chapman et al., Phys. Plasmas 13, 062511 (2006)]. It is found that, even at rather modest flow speeds, the centrifugal effects are very important for the stability of the internal kink mode. While the results from the two codes can be quite similar for certain profiles in the plasma, completely opposite results are obtained for other profiles. A very good agreement between analytical theory and the numerical results are, both for inconsistent and consistent equilibria, found for plasmas with large aspect ratio. From the analytical theory, the distinctly different stability properties of equilibria with and without centrifugal effects included can be traced to the stabilizing effect of the geodesic acoustic mode (GAM) induced by the plasma rotation. This GAM exists solely as a consequence of the nonuniform plasma density and pressure created by the centrifugal force on the flux surfaces, and a stabilizing coupling of the internal kink instability to this mode cannot therefore take place if the centrifugal effects are not included in the equilibrium. In addition to the GAM stabilization, the effects of the radial profiles of the plasma density and rotation velocity are also found to be significant, and the importance of these effects increases with decreasing aspect ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sawtooth-Control Mechanism using Toroidally Propagating Ion-Cyclotron-Resonance Waves in Tokamaks

The sawtooth control mechanism in plasmas employing off-axis toroidally propagating ion cyclotron resonance waves in tokamaks is reinvestigated. The radial drift excursion of energetic passing ions distributed asymmetrically in the velocity parallel to the magnetic field determines stability when the rational q=1 surface resides within a narrow region centered about the shifted fundamental cyclotron resonance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional anisotropic pressure free boundary equilibria

Free boundary three-dimensional anisotropic pressure magnetohydrodynamic equilibria with nested magnetic flux surfaces are computed through the minimisation of the plasma energy functional W = integral(V) d(3)x[B-2/(2 mu(0)) + p(parallel to)/(Gamma - 1)]. The plasma-vacuum interface is varied to guarantee the continuity of the total pressure [p(perpendicular to) + B-2/(2 mu(0))] across it and the vacuum magnetic field must satisfy the Neumann bo undary condition that its component normal to this interfaced surface vanishes. The vacuum magnetic field corresponds to that driven by the plasma current and external coils plus the gradient of a potential function whose solution is obtained using a Green's function method. The energetic particle contributions to the pressure are evaluated analytically from the moments of the variant of a bi-Maxwellian distribution function that satisfies the constraint B . del F-h = 0. Applications to demonstrate the versatility and reliability of the numerical method employed have concentrated on high-beta off-axis energetic particle deposition with large parallel and perpendicular pressure anisotropies in a 2-field period quasiaxisymmetric stellarator reactor system. For large perpendicular pressure anisotropy, the hot particle component of the p(perpendicular to) distribution localises in the regions where the energetic particles are deposited. For large parallel pressure anisotropy. the pressures are more uniform around the flux surfaces. (C) 2009 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction between fast particles and turbulence

A systematic study of high energetic alpha particle interaction with microinstability driven turbulence (ITG) is presented. The alpha particles are considered to be passive, thus not modifying the fine structure of the turbulence, and modelled as Maxwellian distributed. Both the turbulent fields and the evolution of the alpha distribution are computed by means of an Eulerian, flux tube code. It is shown how significant transport of high pressure distributions can occur, and how the direction and the intensity of the particle flux is sensitive to the choice of the temperature scale length of the alpha distribution, due to thermodiffusive phenomena. The diffusivity of an ITER-like case is studied, starting from an analytical treatment of the density and temperature profiles, which we show to be significant. New interpretative tools, by means of a single particle following code, are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monte Carlo ICRH simulations in fully shaped anisotropic plasmas

In order to numerically study the effects of Ion Cyclotron Resonant Heating (ICRH) on the fast particle distribution function in general plasma geometries, three codes have been coupled: VMEC generates a general (2D or 3D) MHD equilibrium including full shaping and pressure anisotropy. This equilibrium is then mapped into Boozer coordinates. The full-wave code LEMan then calculates the power deposition and electromagnetic field strength of a wave field generated by a chosen antenna using a warm model. Finally, the single particle Hamiltonian code VENUS combines the outputs of the two previous codes in order to calculate the evolution of the distribution function. Within VENUS, Monte Carlo operators for Coulomb collisions of the fast particles with the background plasma have been implemented, accounting for pitch angle and energy scattering. Also, ICRH is simulated using Monte Carlo operators on the Doppler shifted resonant layer. The latter operators act in velocity space and induce a change of perpendicular and parallel velocity depending on the electric field strength and the corresponding wave vector. Eventually, the change in the distribution function will then be fed into VMEC for generating a new equilibrium and thus a self-consistent solution can be found. This model is an enhancement of previous studies in that it is able to include full 3D effects such as magnetic ripple, treat the effects of non-zero orbit width consistently and include the generation and effects of pressure anisotropy. Here, first results of coupling the three codes will be shown in 2D tokamak geometries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

3D Plasma Equilibrium and Stability with Hot Particle Anisotropic Pressure

The anisotropic pressure free-boundary three-dimsnsional (3D) equilibrium code ANI-MEC with nested magnetic flux surfaces has been developed as an extension of the VMEC2000 code. The preconditioning algorithm included is exploited to allow the computation of equilibrium states with radial force balance error improvements exceeding 4 orders of magnitude compared with the non-conditioned results. Large off-axis energetic particle deposition has been applied in a 2-field period quasiaxisymmetric stellarator reactor at <{beta}>{approx_equal}4.5% to test the limitations of the code. The hot particle pressures are roughly uniform around the flux surfaces when p{sub parallel}>p{sub perpendicular}. The fast particle perpendicular pressures localise in the region of deposition for p{sub perpendicular}>p{sub parallel}, while the energetic particle parallel pressures concentrate on the low-field side. Two anisotropic pressure models for global fluid stability implemented in the TERPSICHORE code have been applied to the LHD Heliotron for a sequence of equilibria with fixed <{beta}{sub dia}>{approx_equal}5%(<{beta}{sub th}>{approx_equal}3.5%) varying the fast particle temperature ratio T{sub parallel}/T{sub perpendicular}. Global magnetohydrodynamic modes are quasi-stable according to the model with rigid hot particle layers, while they become stabilised according to the fully interacting energetic particle model with increasing T{sub parallel}/T{sub perpendicular}. As T{sub parallel}/T{sub perpendicular} approaches 3, however, the n = 1 mode family becomes unstable. A transition from a nearly stable quasi-external ballooning-interchange structure to a weakly unstable internal kink mode takes place. The investigation of beam-driven fusion in a Heliotron system is broached. A background plasma with cold ions and warm electrons at <{beta}{sub ith}>{approx_equal}1% is examined with fixed T{sub parallel}/T{sub perpendicular} = 10 in which the hot particle contribution to <{beta}> is increased. An equilibrium limit is reached when the hot parallel component <{beta}{sub parallel}{sup h}> exceeds 6.1%. The rigid model predicts stability, while the fully interacting model shows stabilisation for <{beta}{sub parallel}{sup h} greater than 3%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mechanism for blob generation in the TORPEX toroidal plasma

The mechanism for blob generation is detailed in the toroidal magnetized plasma of the TORPEX device [Fasoli et al., Phys. Plasmas 13, 055902 (2006)] using an experimental configuration, which features a plasma region dominated by a coherent wave and a region on the low field side characterized by the propagation of blobs. Predictions from linearized 2D drift-reduced Braginskii equations are compared with experimental data, revealing the interchange nature of the coherent wave. The dynamics of blob formation is investigated using time-resolved measurements of two-dimensional profiles of electron density, temperature, plasma potential and ExB velocity. Blobs form from radially elongated structures associated with the interchange wave. When a blob is generated, the following sequence of events is observed: 1) A decrease of local pressure gradient length provides an increase of the interchange mode drive; 2) in response, the interchange mode increases in amplitude and expands in the radial direction forming a radially elongated structure from the wave crest; 3) the elongated structure is convected by the ExB flow and is eventually sheared off, forming a blob on the low field side. The dependence of the blob amplitude upon the minimum pressure radial scale length before the blob ejection is also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗