Search NASA⌕ Search

Engineering topics

Gray, V. H.

Publications and source records attributed to Gray, V. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Forced-flow once-through boilers

A compilation and review of NASA-sponsored research on boilers for use in spacecraft electrical power generation systems is presented. Emphasis is on the heat-transfer and fluid-flow problems. In addition to space applications, much of the boiler technology is applicable to terrestrial and marine uses such as vehicular power, electrical power generation, vapor generation, and heating and cooling. Related research areas are discussed such as condensation, cavitation, line and boiler dynamics, the SNAP-8 project (Mercury-Rankine cycle), and conventional terrestrial boilers (either supercritical or gravity-assisted liquid-vapor separation types). The research effort was directed at developing the technology for once-through compact boilers with high heat fluxes to generate dry vapor stably, without utilizing gravity for phase separations. A background section that discusses, tutorially, the complex aspects of the boiling process is presented. Discussions of tests on alkali metals are interspersed with those on water and other fluids on a phenomenological basis.

Stone, J. R.↗
NASA NTRS1973

Assessment of jets as acoustic shields by comparison of single- and multitube suppressor nozzle data

Recent 1/4 scale and engine size nozzle acoustic data, for both 37-tube and single nozzles, are used to test the jet-shielding principle. At low jet velocities the multitube nozzle total sound power approaches the equivalent of 37 single tubes (no shielding), while near-sonic and above, the small equivalent number of single tubes compares well with a geometric model of lateral radiation from only about a third of the circumference of the outer jets (nearly complete shielding). At high jet velocities, the geometric shielding hypothesis is in excellent agreement with acoustic data from which the downstream coalesced jet-noise is excluded. Present results are compared with an existing correlation for single jets, and with previous publications on multijet shielding.

Gray, V. H.↗
NASA NTRS1973

Space vehicle with artificial gravity and earth-like environment

A space vehicle adapted to provide an artificial gravity and earthlike atmospheric environment for occupants is disclosed. The vehicle comprises a cylindrically shaped, hollow pressure-tight body, one end of which is tapered from the largest diameter of the body, the other end is flat and transparent to sunlight. The vehicle is provided with thrust means which rotates the body about its longitudinal axis, generating an artificial gravity effect upon the interior walls of the body due to centrifugal forces. The walls of the tapered end of the body are maintained at a temperature below the dew point of water vapor in the body and lower than the temperature near the transparent end of the body. The controlled environment and sunlight permits an earth like environment to be maintained wherein the CO2/O2 is balanced, and food for the travelers is supplied through a natural system of plant life grown on spacecraft walls where soil is located.

Gray, V. H.↗
NASA NTRS1973

Ablative system

A carrier liquid containing ablative material bodies is connected to a plenum chamber wall with openings to a high temperature environment. The liquid and bodies pass through the openings of the wall to form a self replacing ablative surface. The wall is composed of honeycomb layers, spheres containing ablative whiskers or wads, and a hardening catalyst for the carrier liquid. The wall also has woven wicks of ablative material fibers that extend through the wall openings and into plenum chamber which contains the liquid.

Gray, V. H.↗
NASA NTRS1973

Assessment of jets as acoustic shields by comparison of single- and multitube suppressor nozzle data

Recent 1/4 scale and engine size nozzle acoustic data, for both 37-tube and single nozzles, were used to test the jet-shielding principle. At low jet velocities the multitube nozzle total sound power approaches the equivalent of 37 single tubes (no shielding), while near-sonic and above, the small equivalent number of single tubes compares well with a geometric model of lateral radiation from only about a third of the circumference of the outer jets (nearly complete shielding). At high jet velocities, the geometric shielding hypothesis is in excellent agreement with acoustic data from which the downstream coalesced jet noise is excluded. Present results are compared with an existing correlation for single jets, and with previous publications on multijet shielding.

Gray, V. H.↗
NASA NTRS1972

Boiler for generating high quality vapor

Boiler supplies vapor for use in turbines by imparting a high angular velocity to the liquid annulus in heated rotating drum. Drum boiler provides a sharp interface between boiling liquid and vapor, thereby, inhibiting the formation of unwanted liquid droplets.

Gray, V. H.↗
NASA NTRS1972

Jet noise

The main conclusions reached are: (1) At low subsonic jet exhaust velocities, jet noise varies as the velocity to the eighth power; (2) at high subsonic exhaust velocities, jet noise approaches a variation with velocity to the third power; (3) use of the jet density squared overcorrects density effects on jet noise; (4) subsonic and supersonic jet noise levels can be predicted; and (6) use of multielement nozzles and acoustically lined ejectors significantly suppress jet noise at intermediate jet exhaust velocities.

Vonglahn, U. H.↗
NASA NTRS1969

A rotating, noncapillary heat pipe

Hollow rotating shaft operates like a heat pipe, with a small, sealed-in inventory of fluid that transfers heat by vaporizing at the hot end and condensing at the cold end. This heat pipe utilizes large centrifugal forces for pumping the condensate, and rotation to enforce liquid-vapor separation.

Gray, V. H.↗
NASA NTRS1960

Bonded and Sealed External Insulations for Liquid-Hydrogen-Fueled Rocket Tanks During Atmospheric Flight

Several currently available nonmetallic insulation materials that may be bonded onto liquid-hydrogen tanks and sealed against air penetration into the insulation have been investigated for application to rockets and spacecraft. Experimental data were obtained on the thermal conductivities of various materials in the cryogenic temperature range, as well as on the structural integrity and ablation characteristics of these materials at high temperatures occasioned by aerodynamic heating during atmospheric escape. Of the materials tested, commercial corkboard has the best overall properties for the specific requirements imposed during atmospheric flight of a high-acceleration rocket vehicle.

Gray, V. H.↗