Search NASA⌕ Search

Engineering topics

Green, David L.

Publications and source records attributed to Green, David L..

ASGarD: Adaptive Sparse Grid Discretization

Many areas of science exhibit physical processes that are described by high dimensional partial differential equations (PDEs), e.g., the 4D, 5D and 6D models describing magnetized fusion plasmas, models describing quantum chemistry, or derivatives pricing. Such problems are affected by the so-called “curse of dimensionality” where the number of degrees of freedom (or unknowns) required to be solved for scales as N D where N is the number of grid points in any given dimension D. A simple, albeit naive, 6D example is demonstrated in the left panel of Figure 1. With N = 1000 grid points in each dimension, the memory required just to store the solution vector, not to mention forming the matrix required to advance such a system in time, would exceed an exabyte - and also the available memory on the largest of supercomputers available today. The right panel of Figure 1 demonstrates potential savings for a range of problem dimensionalities and grid resolution. While there are methods to simulate such high-dimensional systems, they are mostly based on Monte-Carlo methods, which rely on a statistical sampling such that the resulting solutions include noise. Since the noise in such methods can only be reduced at a rate proportional to $\sqrt{N_p}$ where N p is the number of Monte-Carlo samples, there is a need for continuum, or grid/mesh-based methods for high-dimensional problems, which both do not suffer from noise and bypass the curse of dimensionality. We present a simulation framework that provides such a method using adaptive sparse grids.

97 MATHEMATICS AND COMPUTING↗

Sparse-grid discontinuous Galerkin methods for the Vlasov–Poisson–Lenard–Bernstein model

Sparse-grid methods have recently gained interest in reducing the computational cost of solving high-dimensional kinetic equations. In this paper, we construct adaptive and hybrid sparse-grid methods for the Vlasov–Poisson–Lenard–Bernstein (VPLB) model. This model has applications to plasma physics and is simulated in two reduced geometries: a 0x3v space homogeneous geometry and a 1x3v slab geometry. Here we use the discontinuous Galerkin (DG) method as a base discretization due to its high-order accuracy and ability to preserve important structural properties of partial differential equations. We utilize a multiwavelet basis expansion to determine the sparse-grid basis and the adaptive mesh criteria. We analyze the proposed sparse-grid methods on a suite of three test problems by computing the savings afforded by sparse-grids in comparison to standard solutions of the DG method. The results are obtained using the adaptive sparse-grid discretization library ASGarD.

97 MATHEMATICS AND COMPUTING↗

The MOOSE electromagnetics module

The Multiphysics Object-Oriented Simulation Environment (MOOSE) electromagnetics module has been developed to increase MOOSE physics module capabilities, enabling standalone and coupled computational electromagnetics within the MOOSE multiphysics ecosystem. The module is actively being utilized in the areas of plasma physics and advanced manufacturing, and it currently provides initial demonstrated capability in multi-dimensional, complex-valued electromagnetic wave propagation, electrostatic contact, reflection and transmission, and electromagnetic eigenvalue problems. Two-dimensional wave propagation and one-dimensional wave reflection and transmission are showcased as examples in this work. The modularity, parallelism, and plug-in infrastructure for custom future development is inherited from MOOSE itself, and the module can be used with both MOOSE-based and external codes, giving great flexibility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compression of tokamak boundary plasma simulation data using a maximum volume algorithm for matrix skeleton decomposition

This report demonstrates satisfactory data compression of SOLPS-ITER simulation output ranging from 2D fields, 1D profiles, and 0D scalar variables with a novel matrix decomposition approach. The singular value decomposition (SVD) scales poorly for large matrix sizes and is unsuited to the application on high dimensional data common to fusion plasma physics simulation. In this work, we employ the columns-submatrix-rows (CUR) matrix factorization technique in order to compute a low-rank approximation up to two orders of magnitude faster than the SVD, but within a nominal L2-norm relative error of ε = 10 –2 . In addition, the CUR approach maintains the original format of the data, in its extracted columns and rows, allowing for interpretable data storage at the original resolution of the simulation. We utilize an iterative algorithm to compute the CUR decomposition of simulation output by maximizing the volume, or linearly independent information content, of a low-rank submatrix contained within the data. Experiments over $\textit{n} × \textit{n}$ randomized test matrices with embedded rank-deficient features show that this maximum volume implementation of CUR matrix approximation has reduced asymptotic computational complexity on the order of n compared to the SVD, which scales approximately as $n^3$. These results show that the CUR technique can be used to effectively select time step snapshots (columns) of over 140 SOLPS-ITER output variables and the associated discretized coordinate timeseries (rows) allowing for reconstruction of the complete simulation dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Core-Pedestal Plasma Configurations in Advanced Tokamaks

Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data-driven linear time advance operators for the acceleration of plasma physics simulation

In this study, we demonstrate the application of data-driven linear operator construction for time advance with a goal of accelerating plasma physics simulation. We apply dynamic mode decomposition (DMD) to data produced by the nonlinear SOLPS-ITER (Scrape-off Layer Plasma Simulator - International Thermonuclear Experimental Reactor) plasma boundary code suite in order to estimate a series of linear operators and monitor their predictive accuracy via online error analysis. We find that this approach defines when these dynamics can be represented by a sequence of approximate linear operators and is essential for providing consistent projections when compared to an unconstrained application. For linear diffusion and advection–diffusion fluid test problems, we construct and apply operators within explicit and implicit time advance schemes, demonstrating that stability can be robustly guaranteed in each case. We further investigate the use of the linear time advance operators within several integration methods including forward Euler, backward Euler, and the matrix exponential. The application of this method to simulation data from SOLPS-ITER, with varying levels of Markov chain Monte Carlo numerical noise, shows that constrained DMD operators yield a capability to identify, extract, and integrate a (slow) subset of the present timescales. Example applications show that for projected speedup factors of [Formula: see text], and [Formula: see text], a mean relative error of 3%, 5%, and 8% and maximum relative error less than 20% are achievable, which appears acceptable for typical SOLPS-ITER steady-state simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF sheath induced sputtering on Proto-MPEX. I. Sheath equivalent dielectric layer for modeling the RF sheath

The pulsed linear plasma device Prototype Material Plasma Exposure eXperiment (Proto-MPEX) uses a radio frequency (RF) helicon antenna with an aluminum nitride ceramic window for plasma production. The RF sheath created under the helicon antenna is sufficient to cause ion impact energies to be greater than the sputtering threshold of the AlN helicon window material and for impurities to be created. In this study, we investigate the RF sheath on the inner diameter of the helicon window and its impact on the impurity production rates in Proto-MPEX. Three models—a 3D COMSOL finite element RF model of the Proto-MPEX helicon region, a rectified DC sheath potential model, and the 3D Global Impurity TRansport code—are coupled together to study impurity production and transportation. This novel method of impurity generation and transport modeling spans length scales ranging from the sheath (millimeters or less) up to the full device (meters) and can be applied to other radio frequency sources and antennas in a wide range of plasma physics studies, including basic plasmas, low-temperature processing plasmas, plasma thrusters, and fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Machine learning for analysis of atomic spectral data

Physics based forward models are the basis on which many experimental diagnostics are interpreted. For some diagnostics, models can be computationally expensive which precludes their use in real time analysis. Reduced models have the potential to capture sufficient physics thereby enabling the desired real time analysis. Using statistical inference and machine learning techniques the application of reduced models for inversion of atomic spectral data used to diagnose magnetic fields in a plasma will be examined. Two approaches are considered, (a) a reduction of the forward model where traditional inversion can be performed on the proxy model, and (b) a reduction of the direct inverse where parameters are a function of measured signal. The resulting inversion is sufficiently fast to be utilized in an online context for digital twinning, and ultimately real-time prediction, design, and control of plasma systems, such as tokamaks. Furthermore, these methods will be demonstrated on both simulated and experimentally measured data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Helicon normal modes in Proto-MPEX

Here, the Proto-MPEX helicon source has been operating in a high electron density 'helicon-mode'. Establishing plasma densities and magnetic field strengths under the antenna that allow for the formation of normal modes of the fast-wave are believed to be responsible for the 'helicon-mode'. A 2D finite-element full-wave model of the helicon antenna on Proto-MPEX is used to identify the fast-wave normal modes responsible for the steady-state electron density profile produced by the source. We also show through the simulation that in the regions of operation in which core power deposition is maximum the slow-wave does not deposit significant power besides directly under the antenna. In the case of a simulation where a normal mode is not excited significant edge power is deposited in the mirror region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic-j : A computational kernel for solving the linearized Vlasov equation applied to calculations of the kinetic, configuration space plasma current for time harmonic wave electric fields

We present the Kinetic-j code, a computational kernel for evaluating the linearized Vlasov equation withapplication to calculating the kinetic plasma response (current) to an applied time harmonic wave electricfield. This code addresses the need for a configuration space evaluation of the plasma current to enablekinetic full-wave solvers for waves in hot plasmas to move beyond the limitations of the traditional Fourierspectral methods. We benchmark the kernel via comparison with the standard k-space forms of the hotplasma conductivity tensor.

Green, David L.↗

Observations of electron heating during 28 GHz microwave power application in proto-MPEX

The Prototype Material Plasma Exposure Experiment at the Oak Ridge National Laboratory utilizes a variety of power systems to generate and deliver a high heat flux plasma onto the surface of material targets. In the experiments described here, a deuterium plasma is produced via a ~100 kW, 13.56 MHz RF helicon source, to which ~20 kW of 28 GHz microwave power is applied. The electron density and temperature profiles are measured using a Thomson scattering (TS) diagnostic, and indicate that the electron density is centrally peaked. In the core of the plasma column, the electron density is higher than the cut-off density (~0.9 × 1019 m -3 ) for the launched mixture of X- and O-mode electron cyclotron heating waves to propagate. TS measurements indicate electron temperature increases from ~5 eV to ~20 eV during 28 GHz power application when the neutral deuterium pressure is reduced below 0.13 Pa (~1 mTorr.).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A perspective on the FAA approval process: Integrating rotorcraft displays, controls and workload

The FAA is responsible for making the determination that a helicopter is safe for IFR operations in the National Airspace System (NAS). This involves objective and subjective evaluations of cockpit displays, flying qualities, procedures and human factors as they affect performance and workload. After all of the objective evaluations are completed, and all Federal Regulations have been met, FAA pilots make the final subjective judgement as to suitability for use by civil pilots in the NAS. The paper uses the flying qualities and pilot workload characteristics of a small helicopter to help examine the FAA pilot's involvement in this process. The result highlights the strengths of the process and its importance to the approval of new aircraft and equipments for civil IFR helicopter applications. The paper also identifies opportunities for improvement.

Green, David L.↗

Interpreted Cooper-Harper for broader use

The current aircraft assessment process typically makes extensive use of operational personnel during simulations and operational evaluations, with increased emphasis on evaluating the many pilot and/or operator/aircraft control loops. The need for a crew assessment in this broader arena has produced a variety of rating scales. The Cooper-Harper Rating Scale is frequently misused and routinely overlooked in the process, for these applications often extend the scale's use beyond its originally intended application. This paper agrees with the broader application of the Cooper-Harper Rating Scale and presents a concept for the development of a 'use unique' Interpreted Cooper-Harper Scale to help achieve this objective. This interpreted scale concept was conceived during efforts to support an FAA evaluation of a night vision enhancement system. It includes descriptive extensions, which are faithful to the intent of the current Cooper-Harper Scale and should provide the kind of detail that has historically been provided by trained test pilots in their explanatory comments.

Green, David L.↗