Search NASA⌕ Search

Engineering topics

Gregory, D. J.

Publications and source records attributed to Gregory, D. J..

NASTRAN analysis of the 1/8-scale space shuttle dynamic model

The space shuttle configuration has more complex structural dynamic characteristics than previous launch vehicles primarily because of the high model density at low frequencies and the high degree of coupling between the lateral and longitudinal motions. An accurate analytical representation of these characteristics is a primary means for treating structural dynamics problems during the design phase of the shuttle program. The 1/8-scale model program was developed to explore the adequacy of available analytical modeling technology and to provide the means for investigating problems which are more readily treated experimentally. The basic objectives of the 1/8-scale model program are: (1) to provide early verification of analytical modeling procedures on a shuttle-like structure, (2) to demonstrate important vehicle dynamic characteristics of a typical shuttle design, (3) to disclose any previously unanticipated structural dynamic characteristics, and (4) to provide for development and demonstration of cost effective prototype testing procedures.

Bernstein, M.↗

Some aspects of the NASTRAN program output

The NASTRAN program output is discussed from a structural analysts point of view, and the simple modifications which were made to the program in order to improve it are also described. The convenience of the output for use in original design work is critically appraised and compared with the output from ASTRAL. It is shown that considerable hand calculation is necessary in order to extract useful load distribution data from the available NASTRAN output. For this reason, some effort was directed toward providing additional force output for the NASTRAN shear panel element.

Gregory, D. J.↗